GNU Linux-libre 4.19.264-gnu1
[releases.git] / arch / arm / boot / dts / kirkwood-ts419.dtsi
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Device Tree include file for QNAP TS41X
4  *
5  * Copyright (C) 2013, Andrew Lunn <andrew@lunn.ch>
6  */
7
8 / {
9         model = "QNAP TS419 family";
10         compatible = "qnap,ts419", "marvell,kirkwood";
11
12         ocp@f1000000 {
13                 pinctrl: pin-controller@10000 {
14                         pinctrl-names = "default";
15
16                         pmx_USB_copy_button: pmx-USB-copy-button {
17                                 marvell,pins = "mpp43";
18                                 marvell,function = "gpio";
19                         };
20                         pmx_reset_button: pmx-reset-button {
21                                 marvell,pins = "mpp37";
22                                 marvell,function = "gpio";
23                         };
24                         /*
25                          * JP1 indicates if an LCD module is installed
26                          * on the serial port (0), or if the port is used
27                          * as a console (1).
28                          */
29                         pmx_jumper_jp1: pmx-jumper_jp1 {
30                                 marvell,pins = "mpp45";
31                                 marvell,function = "gpio";
32                         };
33
34                 };
35         };
36
37         gpio_keys {
38                 compatible = "gpio-keys";
39                 #address-cells = <1>;
40                 #size-cells = <0>;
41                 pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
42                 pinctrl-names = "default";
43
44                 copy {
45                         label = "USB Copy";
46                         linux,code = <KEY_COPY>;
47                         gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
48                 };
49                 reset {
50                         label = "Reset";
51                         linux,code = <KEY_RESTART>;
52                         gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
53                 };
54         };
55 };
56
57 &mdio {
58         status = "okay";
59
60         ethphy1: ethernet-phy@1 {
61                 device_type = "ethernet-phy";
62                 /* overwrite reg property in board file */
63         };
64 };
65
66 &eth1 {
67         status = "okay";
68         ethernet1-port@0 {
69                 phy-handle = <&ethphy1>;
70         };
71 };