arch/arm/boot/dts/kirkwood-98dx4122.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 / {
   3         mbus@f1000000 {
   4                 pciec: pcie@82000000 {
   5                         compatible = "marvell,kirkwood-pcie";
   6                         status = "disabled";
   7                         device_type = "pci";
   8
   9                         #address-cells = <3>;
  10                         #size-cells = <2>;
  11
  12                         bus-range = <0x00 0xff>;
  13
  14                         ranges =
  15                                <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
  16                                 0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
  17                                 0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */>;
  18
  19                         pcie0: pcie@1,0 {
  20                                 device_type = "pci";
  21                                 assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
  22                                 reg = <0x0800 0 0 0 0>;
  23                                 #address-cells = <3>;
  24                                 #size-cells = <2>;
  25                                 #interrupt-cells = <1>;
  26                                 ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
  27                                           0x81000000 0 0 0x81000000 0x1 0 1 0>;
  28                                 bus-range = <0x00 0xff>;
  29                                 interrupt-names = "intx", "error";
  30                                 interrupts = <9>, <44>;
  31                                 interrupt-map-mask = <0 0 0 7>;
  32                                 interrupt-map = <0 0 0 1 &pcie_intc 0>,
  33                                                 <0 0 0 2 &pcie_intc 1>,
  34                                                 <0 0 0 3 &pcie_intc 2>,
  35                                                 <0 0 0 4 &pcie_intc 3>;
  36                                 marvell,pcie-port = <0>;
  37                                 marvell,pcie-lane = <0>;
  38                                 clocks = <&gate_clk 2>;
  39                                 status = "disabled";
  40
  41                                 pcie_intc: interrupt-controller {
  42                                         interrupt-controller;
  43                                         #interrupt-cells = <1>;
  44                                 };
  45                         };
  46                 };
  47         };
  48
  49         ocp@f1000000 {
  50                 pinctrl: pin-controller@10000 {
  51                         compatible = "marvell,98dx4122-pinctrl";
  52
  53                 };
  54         };
  55 };
  56
  57 &sata_phy0 {
  58         status = "disabled";
  59 };
  60
  61 &sata_phy1 {
  62         status = "disabled";
  63 };