arch/arm/boot/dts/keystone-k2g-evm.dts

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Device Tree Source for K2G EVM
   4  *
   5  * Copyright (C) 2016-2017 Texas Instruments Incorporated - http://www.ti.com/
   6  */
   7 /dts-v1/;
   8
   9 #include "keystone-k2g.dtsi"
  10
  11 / {
  12         compatible =  "ti,k2g-evm", "ti,k2g", "ti,keystone";
  13         model = "Texas Instruments K2G General Purpose EVM";
  14
  15         memory@800000000 {
  16                 device_type = "memory";
  17                 reg = <0x00000008 0x00000000 0x00000000 0x80000000>;
  18         };
  19
  20         reserved-memory {
  21                 #address-cells = <2>;
  22                 #size-cells = <2>;
  23                 ranges;
  24
  25                 dsp_common_memory: dsp-common-memory@81f800000 {
  26                         compatible = "shared-dma-pool";
  27                         reg = <0x00000008 0x1f800000 0x00000000 0x800000>;
  28                         reusable;
  29                         status = "okay";
  30                 };
  31         };
  32
  33         vcc3v3_dcin_reg: fixedregulator-vcc3v3-dcin {
  34                 compatible = "regulator-fixed";
  35                 regulator-name = "mmc0_fixed";
  36                 regulator-min-microvolt = <3300000>;
  37                 regulator-max-microvolt = <3300000>;
  38                 regulator-always-on;
  39         };
  40
  41         vcc1v8_ldo1_reg: fixedregulator-vcc1v8-ldo1 {
  42                 compatible = "regulator-fixed";
  43                 regulator-name = "ldo1";
  44                 regulator-min-microvolt = <1800000>;
  45                 regulator-max-microvolt = <1800000>;
  46                 regulator-always-on;
  47         };
  48 };
  49
  50 &k2g_pinctrl {
  51         uart0_pins: pinmux_uart0_pins {
  52                 pinctrl-single,pins = <
  53                         K2G_CORE_IOPAD(0x11cc) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)      /* uart0_rxd.uart0_rxd */
  54                         K2G_CORE_IOPAD(0x11d0) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE0)      /* uart0_txd.uart0_txd */
  55                 >;
  56         };
  57
  58         mmc0_pins: pinmux_mmc0_pins {
  59                 pinctrl-single,pins = <
  60                         K2G_CORE_IOPAD(0x1300) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE2)        /* mmc0_dat3.mmc0_dat3 */
  61                         K2G_CORE_IOPAD(0x1304) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE2)        /* mmc0_dat2.mmc0_dat2 */
  62                         K2G_CORE_IOPAD(0x1308) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE2)        /* mmc0_dat1.mmc0_dat1 */
  63                         K2G_CORE_IOPAD(0x130c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE2)        /* mmc0_dat0.mmc0_dat0 */
  64                         K2G_CORE_IOPAD(0x1310) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE2)        /* mmc0_clk.mmc0_clk */
  65                         K2G_CORE_IOPAD(0x1314) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE2)        /* mmc0_cmd.mmc0_cmd */
  66                         K2G_CORE_IOPAD(0x12ec) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3)        /* mmc0_sdcd.gpio1_12 */
  67                 >;
  68         };
  69
  70         mmc1_pins: pinmux_mmc1_pins {
  71                 pinctrl-single,pins = <
  72                         K2G_CORE_IOPAD(0x10ec) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)        /* mmc1_dat7.mmc1_dat7 */
  73                         K2G_CORE_IOPAD(0x10f0) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)        /* mmc1_dat6.mmc1_dat6 */
  74                         K2G_CORE_IOPAD(0x10f4) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)        /* mmc1_dat5.mmc1_dat5 */
  75                         K2G_CORE_IOPAD(0x10f8) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)        /* mmc1_dat4.mmc1_dat4 */
  76                         K2G_CORE_IOPAD(0x10fc) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)        /* mmc1_dat3.mmc1_dat3 */
  77                         K2G_CORE_IOPAD(0x1100) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)        /* mmc1_dat2.mmc1_dat2 */
  78                         K2G_CORE_IOPAD(0x1104) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)        /* mmc1_dat1.mmc1_dat1 */
  79                         K2G_CORE_IOPAD(0x1108) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)        /* mmc1_dat0.mmc1_dat0 */
  80                         K2G_CORE_IOPAD(0x110c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)        /* mmc1_clk.mmc1_clk */
  81                         K2G_CORE_IOPAD(0x1110) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)        /* mmc1_cmd.mmc1_cmd */
  82                 >;
  83         };
  84
  85         i2c0_pins: pinmux_i2c0_pins {
  86                 pinctrl-single,pins = <
  87                         K2G_CORE_IOPAD(0x137c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)        /* i2c0_scl.i2c0_scl */
  88                         K2G_CORE_IOPAD(0x1380) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)        /* i2c0_sda.i2c0_sda */
  89                 >;
  90         };
  91
  92         ecap0_pins: ecap0_pins {
  93                 pinctrl-single,pins = <
  94                         K2G_CORE_IOPAD(0x1374) (BUFFER_CLASS_B | MUX_MODE4)     /* pr1_mdio_data.ecap0_in_apwm0_out */
  95                 >;
  96         };
  97
  98         spi1_pins: pinmux_spi1_pins {
  99                 pinctrl-single,pins = <
 100                         K2G_CORE_IOPAD(0x11a4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)      /* spi1_scs0.spi1_scs0 */
 101                         K2G_CORE_IOPAD(0x11ac) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)      /* spi1_clk.spi1_clk */
 102                         K2G_CORE_IOPAD(0x11b0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)      /* spi1_miso.spi1_miso */
 103                         K2G_CORE_IOPAD(0x11b4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)      /* spi1_mosi.spi1_mosi */
 104                 >;
 105         };
 106
 107         qspi_pins: pinmux_qspi_pins {
 108                 pinctrl-single,pins = <
 109                         K2G_CORE_IOPAD(0x1204) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_clk.qspi_clk */
 110                         K2G_CORE_IOPAD(0x1208) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_rclk.qspi_rclk */
 111                         K2G_CORE_IOPAD(0x120c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d0.qspi_d0 */
 112                         K2G_CORE_IOPAD(0x1210) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d1.qspi_d1 */
 113                         K2G_CORE_IOPAD(0x1214) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d2.qspi_d2 */
 114                         K2G_CORE_IOPAD(0x1218) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d3.qspi_d3 */
 115                         K2G_CORE_IOPAD(0x121c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_csn0.qspi_csn0 */
 116                 >;
 117         };
 118
 119         uart2_pins: pinmux_uart2_pins {
 120                 pinctrl-single,pins = <
 121                         K2G_CORE_IOPAD(0x11ec) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)      /* uart2_rxd.uart2_rxd */
 122                         K2G_CORE_IOPAD(0x11f0) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE0)      /* uart2_txd.uart2_txd */
 123                 >;
 124         };
 125
 126         dcan0_pins: pinmux_dcan0_pins {
 127                 pinctrl-single,pins = <
 128                         K2G_CORE_IOPAD(0x11fc) (BUFFER_CLASS_B | PULL_DISABLE  | MUX_MODE0)     /* dcan0tx.dcan0tx */
 129                         K2G_CORE_IOPAD(0x1200) (BUFFER_CLASS_B | PIN_PULLDOWN  | MUX_MODE0)     /* dcan0rx.dcan0rx */
 130                 >;
 131         };
 132
 133         dcan1_pins: pinmux_dcan1_pins {
 134                 pinctrl-single,pins = <
 135                         K2G_CORE_IOPAD(0x1224) (BUFFER_CLASS_B | PULL_DISABLE  | MUX_MODE1)     /* qspicsn2.dcan1tx */
 136                         K2G_CORE_IOPAD(0x1228) (BUFFER_CLASS_B | PIN_PULLDOWN  | MUX_MODE1)     /* qspicsn3.dcan1rx */
 137                 >;
 138         };
 139
 140         emac_pins: pinmux_emac_pins {
 141                 pinctrl-single,pins = <
 142                         K2G_CORE_IOPAD(0x113C) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)      /* MII_RXD1.RGMII_RXD1 */
 143                         K2G_CORE_IOPAD(0x1138) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)      /* MII_RXD2.RGMII_RXD2 */
 144                         K2G_CORE_IOPAD(0x1134) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)      /* MII_RXD3.RGMII_RXD3 */
 145                         K2G_CORE_IOPAD(0x1140) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)      /* MII_RXD0.RGMII_RXD0 */
 146                         K2G_CORE_IOPAD(0x1178) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)      /* MII_TXD0.RGMII_TXD0 */
 147                         K2G_CORE_IOPAD(0x1174) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)      /* MII_TXD1.RGMII_TXD1 */
 148                         K2G_CORE_IOPAD(0x1170) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)      /* MII_TXD2.RGMII_TXD2 */
 149                         K2G_CORE_IOPAD(0x116C) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)      /* MII_TXD3.RGMII_TXD3 */
 150                         K2G_CORE_IOPAD(0x1154) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)      /* MII_TXCLK.RGMII_TXC */
 151                         K2G_CORE_IOPAD(0x117C) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)      /* MII_TXEN.RGMII_TXCTL */
 152                         K2G_CORE_IOPAD(0x1120) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)      /* MII_RXCLK.RGMII_RXC */
 153                         K2G_CORE_IOPAD(0x1144) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)      /* MII_RXDV.RGMII_RXCTL */
 154                 >;
 155         };
 156
 157         mdio_pins: pinmux_mdio_pins {
 158                 pinctrl-single,pins = <
 159                         K2G_CORE_IOPAD(0x118C) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)      /* MDIO_CLK.MDIO_CLK */
 160                         K2G_CORE_IOPAD(0x1188) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)      /* MDIO_DATA.MDIO_DATA */
 161                 >;
 162         };
 163 };
 164
 165 &uart0 {
 166         pinctrl-names = "default";
 167         pinctrl-0 = <&uart0_pins>;
 168         status = "okay";
 169 };
 170
 171 &gpio1 {
 172         status = "okay";
 173 };
 174
 175 &mmc0 {
 176         pinctrl-names = "default";
 177         pinctrl-0 = <&mmc0_pins>;
 178         vmmc-supply = <&vcc3v3_dcin_reg>;
 179         vqmmc-supply = <&vcc3v3_dcin_reg>;
 180         cd-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
 181         status = "okay";
 182 };
 183
 184 &mmc1 {
 185         pinctrl-names = "default";
 186         pinctrl-0 = <&mmc1_pins>;
 187         vmmc-supply = <&vcc3v3_dcin_reg>; /* VCC3V3_EMMC is connected to VCC3V3_DCIN */
 188         vqmmc-supply = <&vcc1v8_ldo1_reg>;
 189         ti,non-removable;
 190         status = "okay";
 191 };
 192
 193 &dsp0 {
 194         memory-region = <&dsp_common_memory>;
 195         status = "okay";
 196 };
 197
 198 &i2c0 {
 199         pinctrl-names = "default";
 200         pinctrl-0 = <&i2c0_pins>;
 201         status = "okay";
 202
 203         eeprom@50 {
 204                 compatible = "atmel,24c1024";
 205                 reg = <0x50>;
 206         };
 207 };
 208
 209 &keystone_usb0 {
 210         status = "okay";
 211 };
 212
 213 &usb0_phy {
 214         status = "okay";
 215 };
 216
 217 &usb0 {
 218         dr_mode = "host";
 219         status = "okay";
 220 };
 221
 222 &keystone_usb1 {
 223         status = "okay";
 224 };
 225
 226 &usb1_phy {
 227         status = "okay";
 228 };
 229
 230 &usb1 {
 231         dr_mode = "peripheral";
 232         status = "okay";
 233 };
 234
 235 &ecap0 {
 236         status = "okay";
 237         pinctrl-names = "default";
 238         pinctrl-0 = <&ecap0_pins>;
 239 };
 240
 241 &spi1 {
 242         pinctrl-names = "default";
 243         pinctrl-0 = <&spi1_pins>;
 244         status = "okay";
 245
 246         spi_nor: flash@0 {
 247                 #address-cells = <1>;
 248                 #size-cells = <1>;
 249                 compatible = "jedec,spi-nor";
 250                 spi-max-frequency = <5000000>;
 251                 m25p,fast-read;
 252                 reg = <0>;
 253
 254                 partition@0 {
 255                         label = "u-boot-spl";
 256                         reg = <0x0 0x100000>;
 257                         read-only;
 258                 };
 259
 260                 partition@1 {
 261                         label = "misc";
 262                         reg = <0x100000 0xf00000>;
 263                 };
 264         };
 265 };
 266
 267 &qspi {
 268         status = "okay";
 269         pinctrl-names = "default";
 270         pinctrl-0 = <&qspi_pins>;
 271         cdns,rclk-en;
 272
 273         flash0: m25p80@0 {
 274                 compatible = "s25fl512s", "jedec,spi-nor";
 275                 reg = <0>;
 276                 spi-tx-bus-width = <1>;
 277                 spi-rx-bus-width = <4>;
 278                 spi-max-frequency = <96000000>;
 279                 #address-cells = <1>;
 280                 #size-cells = <1>;
 281                 cdns,read-delay = <5>;
 282                 cdns,tshsl-ns = <500>;
 283                 cdns,tsd2d-ns = <500>;
 284                 cdns,tchsh-ns = <119>;
 285                 cdns,tslch-ns = <119>;
 286
 287                 partition@0 {
 288                         label = "QSPI.u-boot-spl-os";
 289                         reg = <0x00000000 0x00100000>;
 290                 };
 291                 partition@1 {
 292                         label = "QSPI.u-boot-env";
 293                         reg = <0x00100000 0x00040000>;
 294                 };
 295                 partition@2 {
 296                         label = "QSPI.skern";
 297                         reg = <0x00140000 0x0040000>;
 298                 };
 299                 partition@3 {
 300                         label = "QSPI.pmmc-firmware";
 301                         reg = <0x00180000 0x0040000>;
 302                 };
 303                 partition@4 {
 304                         label = "QSPI.kernel";
 305                         reg = <0x001C0000 0x0800000>;
 306                 };
 307                 partition@5 {
 308                         label = "QSPI.file-system";
 309                         reg = <0x009C0000 0x3640000>;
 310                 };
 311         };
 312 };
 313
 314 &uart2 {
 315         pinctrl-names = "default";
 316         pinctrl-0 = <&uart2_pins>;
 317         status = "okay";
 318 };
 319
 320 &dcan0 {
 321         pinctrl-names = "default";
 322         pinctrl-0 = <&dcan0_pins>;
 323         status = "okay";
 324 };
 325
 326 &dcan1 {
 327         pinctrl-names = "default";
 328         pinctrl-0 = <&dcan1_pins>;
 329         status = "okay";
 330 };
 331
 332 &qmss {
 333         status = "okay";
 334 };
 335
 336 &knav_dmas {
 337         status = "okay";
 338 };
 339
 340 &mdio {
 341         pinctrl-names = "default";
 342         pinctrl-0 = <&mdio_pins>;
 343         status = "okay";
 344         ethphy0: ethernet-phy@0 {
 345                 reg = <0>;
 346         };
 347 };
 348
 349 &gbe0 {
 350         phy-handle = <&ethphy0>;
 351         phy-mode = "rgmii-id";
 352         status = "okay";
 353 };
 354
 355 &netcp {
 356         pinctrl-names = "default";
 357         pinctrl-0 = <&emac_pins>;
 358         status = "okay";
 359 };