arch/arm/boot/dts/imx6ul.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 //
   3 // Copyright 2015 Freescale Semiconductor, Inc.
   4
   5 #include <dt-bindings/clock/imx6ul-clock.h>
   6 #include <dt-bindings/gpio/gpio.h>
   7 #include <dt-bindings/input/input.h>
   8 #include <dt-bindings/interrupt-controller/arm-gic.h>
   9 #include "imx6ul-pinfunc.h"
  10
  11 / {
  12         #address-cells = <1>;
  13         #size-cells = <1>;
  14         /*
  15          * The decompressor and also some bootloaders rely on a
  16          * pre-existing /chosen node to be available to insert the
  17          * command line and merge other ATAGS info.
  18          */
  19         chosen {};
  20
  21         aliases {
  22                 ethernet0 = &fec1;
  23                 ethernet1 = &fec2;
  24                 gpio0 = &gpio1;
  25                 gpio1 = &gpio2;
  26                 gpio2 = &gpio3;
  27                 gpio3 = &gpio4;
  28                 gpio4 = &gpio5;
  29                 i2c0 = &i2c1;
  30                 i2c1 = &i2c2;
  31                 i2c2 = &i2c3;
  32                 i2c3 = &i2c4;
  33                 mmc0 = &usdhc1;
  34                 mmc1 = &usdhc2;
  35                 serial0 = &uart1;
  36                 serial1 = &uart2;
  37                 serial2 = &uart3;
  38                 serial3 = &uart4;
  39                 serial4 = &uart5;
  40                 serial5 = &uart6;
  41                 serial6 = &uart7;
  42                 serial7 = &uart8;
  43                 sai1 = &sai1;
  44                 sai2 = &sai2;
  45                 sai3 = &sai3;
  46                 spi0 = &ecspi1;
  47                 spi1 = &ecspi2;
  48                 spi2 = &ecspi3;
  49                 spi3 = &ecspi4;
  50                 usb0 = &usbotg1;
  51                 usb1 = &usbotg2;
  52                 usbphy0 = &usbphy1;
  53                 usbphy1 = &usbphy2;
  54         };
  55
  56         cpus {
  57                 #address-cells = <1>;
  58                 #size-cells = <0>;
  59
  60                 cpu0: cpu@0 {
  61                         compatible = "arm,cortex-a7";
  62                         device_type = "cpu";
  63                         reg = <0>;
  64                         clock-frequency = <696000000>;
  65                         clock-latency = <61036>; /* two CLK32 periods */
  66                         #cooling-cells = <2>;
  67                         operating-points =
  68                                 /* kHz  uV */
  69                                 <696000 1275000>,
  70                                 <528000 1175000>,
  71                                 <396000 1025000>,
  72                                 <198000 950000>;
  73                         fsl,soc-operating-points =
  74                                 /* KHz  uV */
  75                                 <696000 1275000>,
  76                                 <528000 1175000>,
  77                                 <396000 1175000>,
  78                                 <198000 1175000>;
  79                         clocks = <&clks IMX6UL_CLK_ARM>,
  80                                  <&clks IMX6UL_CLK_PLL2_BUS>,
  81                                  <&clks IMX6UL_CLK_PLL2_PFD2>,
  82                                  <&clks IMX6UL_CA7_SECONDARY_SEL>,
  83                                  <&clks IMX6UL_CLK_STEP>,
  84                                  <&clks IMX6UL_CLK_PLL1_SW>,
  85                                  <&clks IMX6UL_CLK_PLL1_SYS>;
  86                         clock-names = "arm", "pll2_bus",  "pll2_pfd2_396m",
  87                                       "secondary_sel", "step", "pll1_sw",
  88                                       "pll1_sys";
  89                         arm-supply = <&reg_arm>;
  90                         soc-supply = <&reg_soc>;
  91                         nvmem-cells = <&cpu_speed_grade>;
  92                         nvmem-cell-names = "speed_grade";
  93                 };
  94         };
  95
  96         timer {
  97                 compatible = "arm,armv7-timer";
  98                 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
  99                              <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
 100                              <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
 101                              <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
 102                 interrupt-parent = <&intc>;
 103                 status = "disabled";
 104         };
 105
 106         ckil: clock-cli {
 107                 compatible = "fixed-clock";
 108                 #clock-cells = <0>;
 109                 clock-frequency = <32768>;
 110                 clock-output-names = "ckil";
 111         };
 112
 113         osc: clock-osc {
 114                 compatible = "fixed-clock";
 115                 #clock-cells = <0>;
 116                 clock-frequency = <24000000>;
 117                 clock-output-names = "osc";
 118         };
 119
 120         ipp_di0: clock-di0 {
 121                 compatible = "fixed-clock";
 122                 #clock-cells = <0>;
 123                 clock-frequency = <0>;
 124                 clock-output-names = "ipp_di0";
 125         };
 126
 127         ipp_di1: clock-di1 {
 128                 compatible = "fixed-clock";
 129                 #clock-cells = <0>;
 130                 clock-frequency = <0>;
 131                 clock-output-names = "ipp_di1";
 132         };
 133
 134         pmu {
 135                 compatible = "arm,cortex-a7-pmu";
 136                 interrupt-parent = <&gpc>;
 137                 interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
 138         };
 139
 140         soc: soc {
 141                 #address-cells = <1>;
 142                 #size-cells = <1>;
 143                 compatible = "simple-bus";
 144                 interrupt-parent = <&gpc>;
 145                 ranges;
 146
 147                 ocram: sram@900000 {
 148                         compatible = "mmio-sram";
 149                         reg = <0x00900000 0x20000>;
 150                         ranges = <0 0x00900000 0x20000>;
 151                         #address-cells = <1>;
 152                         #size-cells = <1>;
 153                 };
 154
 155                 intc: interrupt-controller@a01000 {
 156                         compatible = "arm,gic-400", "arm,cortex-a7-gic";
 157                         interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
 158                         #interrupt-cells = <3>;
 159                         interrupt-controller;
 160                         interrupt-parent = <&intc>;
 161                         reg = <0x00a01000 0x1000>,
 162                               <0x00a02000 0x2000>,
 163                               <0x00a04000 0x2000>,
 164                               <0x00a06000 0x2000>;
 165                 };
 166
 167                 dma_apbh: dma-controller@1804000 {
 168                         compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
 169                         reg = <0x01804000 0x2000>;
 170                         interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>,
 171                                      <0 13 IRQ_TYPE_LEVEL_HIGH>,
 172                                      <0 13 IRQ_TYPE_LEVEL_HIGH>,
 173                                      <0 13 IRQ_TYPE_LEVEL_HIGH>;
 174                         interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
 175                         #dma-cells = <1>;
 176                         dma-channels = <4>;
 177                         clocks = <&clks IMX6UL_CLK_APBHDMA>;
 178                 };
 179
 180                 gpmi: nand-controller@1806000 {
 181                         compatible = "fsl,imx6q-gpmi-nand";
 182                         #address-cells = <1>;
 183                         #size-cells = <1>;
 184                         reg = <0x01806000 0x2000>, <0x01808000 0x2000>;
 185                         reg-names = "gpmi-nand", "bch";
 186                         interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
 187                         interrupt-names = "bch";
 188                         clocks = <&clks IMX6UL_CLK_GPMI_IO>,
 189                                  <&clks IMX6UL_CLK_GPMI_APB>,
 190                                  <&clks IMX6UL_CLK_GPMI_BCH>,
 191                                  <&clks IMX6UL_CLK_GPMI_BCH_APB>,
 192                                  <&clks IMX6UL_CLK_PER_BCH>;
 193                         clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
 194                                       "gpmi_bch_apb", "per1_bch";
 195                         dmas = <&dma_apbh 0>;
 196                         dma-names = "rx-tx";
 197                         status = "disabled";
 198                 };
 199
 200                 aips1: bus@2000000 {
 201                         compatible = "fsl,aips-bus", "simple-bus";
 202                         #address-cells = <1>;
 203                         #size-cells = <1>;
 204                         reg = <0x02000000 0x100000>;
 205                         ranges;
 206
 207                         spba-bus@2000000 {
 208                                 compatible = "fsl,spba-bus", "simple-bus";
 209                                 #address-cells = <1>;
 210                                 #size-cells = <1>;
 211                                 reg = <0x02000000 0x40000>;
 212                                 ranges;
 213
 214                                 ecspi1: spi@2008000 {
 215                                         #address-cells = <1>;
 216                                         #size-cells = <0>;
 217                                         compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
 218                                         reg = <0x02008000 0x4000>;
 219                                         interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 220                                         clocks = <&clks IMX6UL_CLK_ECSPI1>,
 221                                                  <&clks IMX6UL_CLK_ECSPI1>;
 222                                         clock-names = "ipg", "per";
 223                                         dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
 224                                         dma-names = "rx", "tx";
 225                                         status = "disabled";
 226                                 };
 227
 228                                 ecspi2: spi@200c000 {
 229                                         #address-cells = <1>;
 230                                         #size-cells = <0>;
 231                                         compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
 232                                         reg = <0x0200c000 0x4000>;
 233                                         interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 234                                         clocks = <&clks IMX6UL_CLK_ECSPI2>,
 235                                                  <&clks IMX6UL_CLK_ECSPI2>;
 236                                         clock-names = "ipg", "per";
 237                                         dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
 238                                         dma-names = "rx", "tx";
 239                                         status = "disabled";
 240                                 };
 241
 242                                 ecspi3: spi@2010000 {
 243                                         #address-cells = <1>;
 244                                         #size-cells = <0>;
 245                                         compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
 246                                         reg = <0x02010000 0x4000>;
 247                                         interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 248                                         clocks = <&clks IMX6UL_CLK_ECSPI3>,
 249                                                  <&clks IMX6UL_CLK_ECSPI3>;
 250                                         clock-names = "ipg", "per";
 251                                         dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
 252                                         dma-names = "rx", "tx";
 253                                         status = "disabled";
 254                                 };
 255
 256                                 ecspi4: spi@2014000 {
 257                                         #address-cells = <1>;
 258                                         #size-cells = <0>;
 259                                         compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
 260                                         reg = <0x02014000 0x4000>;
 261                                         interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 262                                         clocks = <&clks IMX6UL_CLK_ECSPI4>,
 263                                                  <&clks IMX6UL_CLK_ECSPI4>;
 264                                         clock-names = "ipg", "per";
 265                                         dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
 266                                         dma-names = "rx", "tx";
 267                                         status = "disabled";
 268                                 };
 269
 270                                 uart7: serial@2018000 {
 271                                         compatible = "fsl,imx6ul-uart",
 272                                                      "fsl,imx6q-uart";
 273                                         reg = <0x02018000 0x4000>;
 274                                         interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 275                                         clocks = <&clks IMX6UL_CLK_UART7_IPG>,
 276                                                  <&clks IMX6UL_CLK_UART7_SERIAL>;
 277                                         clock-names = "ipg", "per";
 278                                         status = "disabled";
 279                                 };
 280
 281                                 uart1: serial@2020000 {
 282                                         compatible = "fsl,imx6ul-uart",
 283                                                      "fsl,imx6q-uart";
 284                                         reg = <0x02020000 0x4000>;
 285                                         interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 286                                         clocks = <&clks IMX6UL_CLK_UART1_IPG>,
 287                                                  <&clks IMX6UL_CLK_UART1_SERIAL>;
 288                                         clock-names = "ipg", "per";
 289                                         status = "disabled";
 290                                 };
 291
 292                                 uart8: serial@2024000 {
 293                                         compatible = "fsl,imx6ul-uart",
 294                                                      "fsl,imx6q-uart";
 295                                         reg = <0x02024000 0x4000>;
 296                                         interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 297                                         clocks = <&clks IMX6UL_CLK_UART8_IPG>,
 298                                                  <&clks IMX6UL_CLK_UART8_SERIAL>;
 299                                         clock-names = "ipg", "per";
 300                                         status = "disabled";
 301                                 };
 302
 303                                 sai1: sai@2028000 {
 304                                         #sound-dai-cells = <0>;
 305                                         compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai";
 306                                         reg = <0x02028000 0x4000>;
 307                                         interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 308                                         clocks = <&clks IMX6UL_CLK_SAI1_IPG>,
 309                                                  <&clks IMX6UL_CLK_SAI1>,
 310                                                  <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>;
 311                                         clock-names = "bus", "mclk1", "mclk2", "mclk3";
 312                                         dmas = <&sdma 35 24 0>,
 313                                                <&sdma 36 24 0>;
 314                                         dma-names = "rx", "tx";
 315                                         status = "disabled";
 316                                 };
 317
 318                                 sai2: sai@202c000 {
 319                                         #sound-dai-cells = <0>;
 320                                         compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai";
 321                                         reg = <0x0202c000 0x4000>;
 322                                         interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
 323                                         clocks = <&clks IMX6UL_CLK_SAI2_IPG>,
 324                                                  <&clks IMX6UL_CLK_SAI2>,
 325                                                  <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>;
 326                                         clock-names = "bus", "mclk1", "mclk2", "mclk3";
 327                                         dmas = <&sdma 37 24 0>,
 328                                                <&sdma 38 24 0>;
 329                                         dma-names = "rx", "tx";
 330                                         status = "disabled";
 331                                 };
 332
 333                                 sai3: sai@2030000 {
 334                                         #sound-dai-cells = <0>;
 335                                         compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai";
 336                                         reg = <0x02030000 0x4000>;
 337                                         interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
 338                                         clocks = <&clks IMX6UL_CLK_SAI3_IPG>,
 339                                                  <&clks IMX6UL_CLK_SAI3>,
 340                                                  <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>;
 341                                         clock-names = "bus", "mclk1", "mclk2", "mclk3";
 342                                         dmas = <&sdma 39 24 0>,
 343                                                <&sdma 40 24 0>;
 344                                         dma-names = "rx", "tx";
 345                                         status = "disabled";
 346                                 };
 347
 348                                 asrc: asrc@2034000 {
 349                                         compatible = "fsl,imx6ul-asrc", "fsl,imx53-asrc";
 350                                         reg = <0x2034000 0x4000>;
 351                                         interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
 352                                         clocks = <&clks IMX6UL_CLK_ASRC_IPG>,
 353                                                 <&clks IMX6UL_CLK_ASRC_MEM>, <&clks 0>,
 354                                                 <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
 355                                                 <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
 356                                                 <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
 357                                                 <&clks IMX6UL_CLK_SPDIF>, <&clks 0>, <&clks 0>,
 358                                                 <&clks IMX6UL_CLK_SPBA>;
 359                                         clock-names = "mem", "ipg", "asrck_0",
 360                                                 "asrck_1", "asrck_2", "asrck_3", "asrck_4",
 361                                                 "asrck_5", "asrck_6", "asrck_7", "asrck_8",
 362                                                 "asrck_9", "asrck_a", "asrck_b", "asrck_c",
 363                                                 "asrck_d", "asrck_e", "asrck_f", "spba";
 364                                         dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>,
 365                                                 <&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
 366                                         dma-names = "rxa", "rxb", "rxc",
 367                                                     "txa", "txb", "txc";
 368                                         fsl,asrc-rate  = <48000>;
 369                                         fsl,asrc-width = <16>;
 370                                         status = "okay";
 371                                 };
 372                         };
 373
 374                         tsc: tsc@2040000 {
 375                                 compatible = "fsl,imx6ul-tsc";
 376                                 reg = <0x02040000 0x4000>, <0x0219c000 0x4000>;
 377                                 interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
 378                                              <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
 379                                 clocks = <&clks IMX6UL_CLK_IPG>,
 380                                          <&clks IMX6UL_CLK_ADC2>;
 381                                 clock-names = "tsc", "adc";
 382                                 status = "disabled";
 383                         };
 384
 385                         pwm1: pwm@2080000 {
 386                                 compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
 387                                 reg = <0x02080000 0x4000>;
 388                                 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 389                                 clocks = <&clks IMX6UL_CLK_PWM1>,
 390                                          <&clks IMX6UL_CLK_PWM1>;
 391                                 clock-names = "ipg", "per";
 392                                 #pwm-cells = <3>;
 393                                 status = "disabled";
 394                         };
 395
 396                         pwm2: pwm@2084000 {
 397                                 compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
 398                                 reg = <0x02084000 0x4000>;
 399                                 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 400                                 clocks = <&clks IMX6UL_CLK_PWM2>,
 401                                          <&clks IMX6UL_CLK_PWM2>;
 402                                 clock-names = "ipg", "per";
 403                                 #pwm-cells = <3>;
 404                                 status = "disabled";
 405                         };
 406
 407                         pwm3: pwm@2088000 {
 408                                 compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
 409                                 reg = <0x02088000 0x4000>;
 410                                 interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 411                                 clocks = <&clks IMX6UL_CLK_PWM3>,
 412                                          <&clks IMX6UL_CLK_PWM3>;
 413                                 clock-names = "ipg", "per";
 414                                 #pwm-cells = <3>;
 415                                 status = "disabled";
 416                         };
 417
 418                         pwm4: pwm@208c000 {
 419                                 compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
 420                                 reg = <0x0208c000 0x4000>;
 421                                 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 422                                 clocks = <&clks IMX6UL_CLK_PWM4>,
 423                                          <&clks IMX6UL_CLK_PWM4>;
 424                                 clock-names = "ipg", "per";
 425                                 #pwm-cells = <3>;
 426                                 status = "disabled";
 427                         };
 428
 429                         can1: can@2090000 {
 430                                 compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan";
 431                                 reg = <0x02090000 0x4000>;
 432                                 interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 433                                 clocks = <&clks IMX6UL_CLK_CAN1_IPG>,
 434                                          <&clks IMX6UL_CLK_CAN1_SERIAL>;
 435                                 clock-names = "ipg", "per";
 436                                 fsl,stop-mode = <&gpr 0x10 1>;
 437                                 status = "disabled";
 438                         };
 439
 440                         can2: can@2094000 {
 441                                 compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan";
 442                                 reg = <0x02094000 0x4000>;
 443                                 interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
 444                                 clocks = <&clks IMX6UL_CLK_CAN2_IPG>,
 445                                          <&clks IMX6UL_CLK_CAN2_SERIAL>;
 446                                 clock-names = "ipg", "per";
 447                                 fsl,stop-mode = <&gpr 0x10 2>;
 448                                 status = "disabled";
 449                         };
 450
 451                         gpt1: timer@2098000 {
 452                                 compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt";
 453                                 reg = <0x02098000 0x4000>;
 454                                 interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 455                                 clocks = <&clks IMX6UL_CLK_GPT1_BUS>,
 456                                          <&clks IMX6UL_CLK_GPT1_SERIAL>;
 457                                 clock-names = "ipg", "per";
 458                         };
 459
 460                         gpio1: gpio@209c000 {
 461                                 compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
 462                                 reg = <0x0209c000 0x4000>;
 463                                 interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
 464                                              <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 465                                 clocks = <&clks IMX6UL_CLK_GPIO1>;
 466                                 gpio-controller;
 467                                 #gpio-cells = <2>;
 468                                 interrupt-controller;
 469                                 #interrupt-cells = <2>;
 470                                 gpio-ranges = <&iomuxc  0 23 10>, <&iomuxc 10 17 6>,
 471                                               <&iomuxc 16 33 16>;
 472                         };
 473
 474                         gpio2: gpio@20a0000 {
 475                                 compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
 476                                 reg = <0x020a0000 0x4000>;
 477                                 interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
 478                                              <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 479                                 clocks = <&clks IMX6UL_CLK_GPIO2>;
 480                                 gpio-controller;
 481                                 #gpio-cells = <2>;
 482                                 interrupt-controller;
 483                                 #interrupt-cells = <2>;
 484                                 gpio-ranges = <&iomuxc 0 49 16>, <&iomuxc 16 111 6>;
 485                         };
 486
 487                         gpio3: gpio@20a4000 {
 488                                 compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
 489                                 reg = <0x020a4000 0x4000>;
 490                                 interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
 491                                              <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 492                                 clocks = <&clks IMX6UL_CLK_GPIO3>;
 493                                 gpio-controller;
 494                                 #gpio-cells = <2>;
 495                                 interrupt-controller;
 496                                 #interrupt-cells = <2>;
 497                                 gpio-ranges = <&iomuxc 0 65 29>;
 498                         };
 499
 500                         gpio4: gpio@20a8000 {
 501                                 compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
 502                                 reg = <0x020a8000 0x4000>;
 503                                 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
 504                                              <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 505                                 clocks = <&clks IMX6UL_CLK_GPIO4>;
 506                                 gpio-controller;
 507                                 #gpio-cells = <2>;
 508                                 interrupt-controller;
 509                                 #interrupt-cells = <2>;
 510                                 gpio-ranges = <&iomuxc 0 94 17>, <&iomuxc 17 117 12>;
 511                         };
 512
 513                         gpio5: gpio@20ac000 {
 514                                 compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
 515                                 reg = <0x020ac000 0x4000>;
 516                                 interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
 517                                              <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
 518                                 clocks = <&clks IMX6UL_CLK_GPIO5>;
 519                                 gpio-controller;
 520                                 #gpio-cells = <2>;
 521                                 interrupt-controller;
 522                                 #interrupt-cells = <2>;
 523                                 gpio-ranges = <&iomuxc 0 7 10>, <&iomuxc 10 5 2>;
 524                         };
 525
 526                         fec2: ethernet@20b4000 {
 527                                 compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec";
 528                                 reg = <0x020b4000 0x4000>;
 529                                 interrupt-names = "int0", "pps";
 530                                 interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
 531                                              <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
 532                                 clocks = <&clks IMX6UL_CLK_ENET>,
 533                                          <&clks IMX6UL_CLK_ENET_AHB>,
 534                                          <&clks IMX6UL_CLK_ENET_PTP>,
 535                                          <&clks IMX6UL_CLK_ENET2_REF_125M>,
 536                                          <&clks IMX6UL_CLK_ENET2_REF_125M>;
 537                                 clock-names = "ipg", "ahb", "ptp",
 538                                               "enet_clk_ref", "enet_out";
 539                                 fsl,num-tx-queues = <1>;
 540                                 fsl,num-rx-queues = <1>;
 541                                 fsl,stop-mode = <&gpr 0x10 4>;
 542                                 fsl,magic-packet;
 543                                 status = "disabled";
 544                         };
 545
 546                         kpp: keypad@20b8000 {
 547                                 compatible = "fsl,imx6ul-kpp", "fsl,imx21-kpp";
 548                                 reg = <0x020b8000 0x4000>;
 549                                 interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
 550                                 clocks = <&clks IMX6UL_CLK_KPP>;
 551                                 status = "disabled";
 552                         };
 553
 554                         wdog1: watchdog@20bc000 {
 555                                 compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
 556                                 reg = <0x020bc000 0x4000>;
 557                                 interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 558                                 clocks = <&clks IMX6UL_CLK_WDOG1>;
 559                         };
 560
 561                         wdog2: watchdog@20c0000 {
 562                                 compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
 563                                 reg = <0x020c0000 0x4000>;
 564                                 interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 565                                 clocks = <&clks IMX6UL_CLK_WDOG2>;
 566                                 status = "disabled";
 567                         };
 568
 569                         clks: clock-controller@20c4000 {
 570                                 compatible = "fsl,imx6ul-ccm";
 571                                 reg = <0x020c4000 0x4000>;
 572                                 interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
 573                                              <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
 574                                 #clock-cells = <1>;
 575                                 clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
 576                                 clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
 577                         };
 578
 579                         anatop: anatop@20c8000 {
 580                                 compatible = "fsl,imx6ul-anatop", "fsl,imx6q-anatop",
 581                                              "syscon", "simple-mfd";
 582                                 reg = <0x020c8000 0x1000>;
 583                                 interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
 584                                              <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
 585                                              <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
 586
 587                                 reg_3p0: regulator-3p0 {
 588                                         compatible = "fsl,anatop-regulator";
 589                                         regulator-name = "vdd3p0";
 590                                         regulator-min-microvolt = <2625000>;
 591                                         regulator-max-microvolt = <3400000>;
 592                                         anatop-reg-offset = <0x120>;
 593                                         anatop-vol-bit-shift = <8>;
 594                                         anatop-vol-bit-width = <5>;
 595                                         anatop-min-bit-val = <0>;
 596                                         anatop-min-voltage = <2625000>;
 597                                         anatop-max-voltage = <3400000>;
 598                                         anatop-enable-bit = <0>;
 599                                 };
 600
 601                                 reg_arm: regulator-vddcore {
 602                                         compatible = "fsl,anatop-regulator";
 603                                         regulator-name = "cpu";
 604                                         regulator-min-microvolt = <725000>;
 605                                         regulator-max-microvolt = <1450000>;
 606                                         regulator-always-on;
 607                                         anatop-reg-offset = <0x140>;
 608                                         anatop-vol-bit-shift = <0>;
 609                                         anatop-vol-bit-width = <5>;
 610                                         anatop-delay-reg-offset = <0x170>;
 611                                         anatop-delay-bit-shift = <24>;
 612                                         anatop-delay-bit-width = <2>;
 613                                         anatop-min-bit-val = <1>;
 614                                         anatop-min-voltage = <725000>;
 615                                         anatop-max-voltage = <1450000>;
 616                                 };
 617
 618                                 reg_soc: regulator-vddsoc {
 619                                         compatible = "fsl,anatop-regulator";
 620                                         regulator-name = "vddsoc";
 621                                         regulator-min-microvolt = <725000>;
 622                                         regulator-max-microvolt = <1450000>;
 623                                         regulator-always-on;
 624                                         anatop-reg-offset = <0x140>;
 625                                         anatop-vol-bit-shift = <18>;
 626                                         anatop-vol-bit-width = <5>;
 627                                         anatop-delay-reg-offset = <0x170>;
 628                                         anatop-delay-bit-shift = <28>;
 629                                         anatop-delay-bit-width = <2>;
 630                                         anatop-min-bit-val = <1>;
 631                                         anatop-min-voltage = <725000>;
 632                                         anatop-max-voltage = <1450000>;
 633                                 };
 634
 635                                 tempmon: tempmon {
 636                                         compatible = "fsl,imx6ul-tempmon", "fsl,imx6sx-tempmon";
 637                                         interrupt-parent = <&gpc>;
 638                                         interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
 639                                         fsl,tempmon = <&anatop>;
 640                                         nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
 641                                         nvmem-cell-names = "calib", "temp_grade";
 642                                         clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>;
 643                                 };
 644                         };
 645
 646                         usbphy1: usbphy@20c9000 {
 647                                 compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
 648                                 reg = <0x020c9000 0x1000>;
 649                                 interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
 650                                 clocks = <&clks IMX6UL_CLK_USBPHY1>;
 651                                 phy-3p0-supply = <&reg_3p0>;
 652                                 fsl,anatop = <&anatop>;
 653                         };
 654
 655                         usbphy2: usbphy@20ca000 {
 656                                 compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
 657                                 reg = <0x020ca000 0x1000>;
 658                                 interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 659                                 clocks = <&clks IMX6UL_CLK_USBPHY2>;
 660                                 phy-3p0-supply = <&reg_3p0>;
 661                                 fsl,anatop = <&anatop>;
 662                         };
 663
 664                         snvs: snvs@20cc000 {
 665                                 compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
 666                                 reg = <0x020cc000 0x4000>;
 667
 668                                 snvs_rtc: snvs-rtc-lp {
 669                                         compatible = "fsl,sec-v4.0-mon-rtc-lp";
 670                                         regmap = <&snvs>;
 671                                         offset = <0x34>;
 672                                         interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
 673                                                      <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 674                                 };
 675
 676                                 snvs_poweroff: snvs-poweroff {
 677                                         compatible = "syscon-poweroff";
 678                                         regmap = <&snvs>;
 679                                         offset = <0x38>;
 680                                         value = <0x60>;
 681                                         mask = <0x60>;
 682                                         status = "disabled";
 683                                 };
 684
 685                                 snvs_pwrkey: snvs-powerkey {
 686                                         compatible = "fsl,sec-v4.0-pwrkey";
 687                                         regmap = <&snvs>;
 688                                         interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 689                                         linux,keycode = <KEY_POWER>;
 690                                         wakeup-source;
 691                                         status = "disabled";
 692                                 };
 693
 694                                 snvs_lpgpr: snvs-lpgpr {
 695                                         compatible = "fsl,imx6ul-snvs-lpgpr";
 696                                 };
 697                         };
 698
 699                         epit1: epit@20d0000 {
 700                                 reg = <0x020d0000 0x4000>;
 701                                 interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
 702                         };
 703
 704                         epit2: epit@20d4000 {
 705                                 reg = <0x020d4000 0x4000>;
 706                                 interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
 707                         };
 708
 709                         src: reset-controller@20d8000 {
 710                                 compatible = "fsl,imx6ul-src", "fsl,imx51-src";
 711                                 reg = <0x020d8000 0x4000>;
 712                                 interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
 713                                              <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 714                                 #reset-cells = <1>;
 715                         };
 716
 717                         gpc: gpc@20dc000 {
 718                                 compatible = "fsl,imx6ul-gpc", "fsl,imx6q-gpc";
 719                                 reg = <0x020dc000 0x4000>;
 720                                 interrupt-controller;
 721                                 #interrupt-cells = <3>;
 722                                 interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 723                                 interrupt-parent = <&intc>;
 724                         };
 725
 726                         iomuxc: pinctrl@20e0000 {
 727                                 compatible = "fsl,imx6ul-iomuxc";
 728                                 reg = <0x020e0000 0x4000>;
 729                         };
 730
 731                         gpr: iomuxc-gpr@20e4000 {
 732                                 compatible = "fsl,imx6ul-iomuxc-gpr",
 733                                              "fsl,imx6q-iomuxc-gpr", "syscon";
 734                                 reg = <0x020e4000 0x4000>;
 735                         };
 736
 737                         gpt2: timer@20e8000 {
 738                                 compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt";
 739                                 reg = <0x020e8000 0x4000>;
 740                                 interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 741                                 clocks = <&clks IMX6UL_CLK_GPT2_BUS>,
 742                                          <&clks IMX6UL_CLK_GPT2_SERIAL>;
 743                                 clock-names = "ipg", "per";
 744                                 status = "disabled";
 745                         };
 746
 747                         sdma: dma-controller@20ec000 {
 748                                 compatible = "fsl,imx6ul-sdma", "fsl,imx6q-sdma",
 749                                              "fsl,imx35-sdma";
 750                                 reg = <0x020ec000 0x4000>;
 751                                 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 752                                 clocks = <&clks IMX6UL_CLK_IPG>,
 753                                          <&clks IMX6UL_CLK_SDMA>;
 754                                 clock-names = "ipg", "ahb";
 755                                 #dma-cells = <3>;
 756                                 fsl,sdma-ram-script-name = "/*(DEBLOBBED)*/";
 757                         };
 758
 759                         pwm5: pwm@20f0000 {
 760                                 compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
 761                                 reg = <0x020f0000 0x4000>;
 762                                 interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 763                                 clocks = <&clks IMX6UL_CLK_PWM5>,
 764                                          <&clks IMX6UL_CLK_PWM5>;
 765                                 clock-names = "ipg", "per";
 766                                 #pwm-cells = <3>;
 767                                 status = "disabled";
 768                         };
 769
 770                         pwm6: pwm@20f4000 {
 771                                 compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
 772                                 reg = <0x020f4000 0x4000>;
 773                                 interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
 774                                 clocks = <&clks IMX6UL_CLK_PWM6>,
 775                                          <&clks IMX6UL_CLK_PWM6>;
 776                                 clock-names = "ipg", "per";
 777                                 #pwm-cells = <3>;
 778                                 status = "disabled";
 779                         };
 780
 781                         pwm7: pwm@20f8000 {
 782                                 compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
 783                                 reg = <0x020f8000 0x4000>;
 784                                 interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
 785                                 clocks = <&clks IMX6UL_CLK_PWM7>,
 786                                          <&clks IMX6UL_CLK_PWM7>;
 787                                 clock-names = "ipg", "per";
 788                                 #pwm-cells = <3>;
 789                                 status = "disabled";
 790                         };
 791
 792                         pwm8: pwm@20fc000 {
 793                                 compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
 794                                 reg = <0x020fc000 0x4000>;
 795                                 interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
 796                                 clocks = <&clks IMX6UL_CLK_PWM8>,
 797                                          <&clks IMX6UL_CLK_PWM8>;
 798                                 clock-names = "ipg", "per";
 799                                 #pwm-cells = <3>;
 800                                 status = "disabled";
 801                         };
 802                 };
 803
 804                 aips2: bus@2100000 {
 805                         compatible = "fsl,aips-bus", "simple-bus";
 806                         #address-cells = <1>;
 807                         #size-cells = <1>;
 808                         reg = <0x02100000 0x100000>;
 809                         ranges;
 810
 811                         crypto: crypto@2140000 {
 812                                 compatible = "fsl,imx6ul-caam", "fsl,sec-v4.0";
 813                                 #address-cells = <1>;
 814                                 #size-cells = <1>;
 815                                 reg = <0x2140000 0x3c000>;
 816                                 ranges = <0 0x2140000 0x3c000>;
 817                                 interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
 818                                 clocks = <&clks IMX6UL_CLK_CAAM_IPG>, <&clks IMX6UL_CLK_CAAM_ACLK>,
 819                                          <&clks IMX6UL_CLK_CAAM_MEM>;
 820                                 clock-names = "ipg", "aclk", "mem";
 821
 822                                 sec_jr0: jr@1000 {
 823                                         compatible = "fsl,sec-v4.0-job-ring";
 824                                         reg = <0x1000 0x1000>;
 825                                         interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 826                                 };
 827
 828                                 sec_jr1: jr@2000 {
 829                                         compatible = "fsl,sec-v4.0-job-ring";
 830                                         reg = <0x2000 0x1000>;
 831                                         interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 832                                 };
 833
 834                                 sec_jr2: jr@3000 {
 835                                         compatible = "fsl,sec-v4.0-job-ring";
 836                                         reg = <0x3000 0x1000>;
 837                                         interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 838                                 };
 839                         };
 840
 841                         usbotg1: usb@2184000 {
 842                                 compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
 843                                 reg = <0x02184000 0x200>;
 844                                 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 845                                 clocks = <&clks IMX6UL_CLK_USBOH3>;
 846                                 fsl,usbphy = <&usbphy1>;
 847                                 fsl,usbmisc = <&usbmisc 0>;
 848                                 fsl,anatop = <&anatop>;
 849                                 ahb-burst-config = <0x0>;
 850                                 tx-burst-size-dword = <0x10>;
 851                                 rx-burst-size-dword = <0x10>;
 852                                 status = "disabled";
 853                         };
 854
 855                         usbotg2: usb@2184200 {
 856                                 compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
 857                                 reg = <0x02184200 0x200>;
 858                                 interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 859                                 clocks = <&clks IMX6UL_CLK_USBOH3>;
 860                                 fsl,usbphy = <&usbphy2>;
 861                                 fsl,usbmisc = <&usbmisc 1>;
 862                                 ahb-burst-config = <0x0>;
 863                                 tx-burst-size-dword = <0x10>;
 864                                 rx-burst-size-dword = <0x10>;
 865                                 status = "disabled";
 866                         };
 867
 868                         usbmisc: usbmisc@2184800 {
 869                                 #index-cells = <1>;
 870                                 compatible = "fsl,imx6ul-usbmisc", "fsl,imx6q-usbmisc";
 871                                 reg = <0x02184800 0x200>;
 872                         };
 873
 874                         fec1: ethernet@2188000 {
 875                                 compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec";
 876                                 reg = <0x02188000 0x4000>;
 877                                 interrupt-names = "int0", "pps";
 878                                 interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
 879                                              <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
 880                                 clocks = <&clks IMX6UL_CLK_ENET>,
 881                                          <&clks IMX6UL_CLK_ENET_AHB>,
 882                                          <&clks IMX6UL_CLK_ENET_PTP>,
 883                                          <&clks IMX6UL_CLK_ENET_REF>,
 884                                          <&clks IMX6UL_CLK_ENET_REF>;
 885                                 clock-names = "ipg", "ahb", "ptp",
 886                                               "enet_clk_ref", "enet_out";
 887                                 fsl,num-tx-queues = <1>;
 888                                 fsl,num-rx-queues = <1>;
 889                                 fsl,stop-mode = <&gpr 0x10 3>;
 890                                 fsl,magic-packet;
 891                                 status = "disabled";
 892                         };
 893
 894                         usdhc1: mmc@2190000 {
 895                                 compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
 896                                 reg = <0x02190000 0x4000>;
 897                                 interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
 898                                 clocks = <&clks IMX6UL_CLK_USDHC1>,
 899                                          <&clks IMX6UL_CLK_USDHC1>,
 900                                          <&clks IMX6UL_CLK_USDHC1>;
 901                                 clock-names = "ipg", "ahb", "per";
 902                                 fsl,tuning-step = <2>;
 903                                 fsl,tuning-start-tap = <20>;
 904                                 bus-width = <4>;
 905                                 status = "disabled";
 906                         };
 907
 908                         usdhc2: mmc@2194000 {
 909                                 compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
 910                                 reg = <0x02194000 0x4000>;
 911                                 interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 912                                 clocks = <&clks IMX6UL_CLK_USDHC2>,
 913                                          <&clks IMX6UL_CLK_USDHC2>,
 914                                          <&clks IMX6UL_CLK_USDHC2>;
 915                                 clock-names = "ipg", "ahb", "per";
 916                                 bus-width = <4>;
 917                                 fsl,tuning-step = <2>;
 918                                 fsl,tuning-start-tap = <20>;
 919                                 status = "disabled";
 920                         };
 921
 922                         adc1: adc@2198000 {
 923                                 compatible = "fsl,imx6ul-adc", "fsl,vf610-adc";
 924                                 reg = <0x02198000 0x4000>;
 925                                 interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 926                                 clocks = <&clks IMX6UL_CLK_ADC1>;
 927                                 clock-names = "adc";
 928                                 fsl,adck-max-frequency = <30000000>, <40000000>,
 929                                                          <20000000>;
 930                                 status = "disabled";
 931                         };
 932
 933                         i2c1: i2c@21a0000 {
 934                                 #address-cells = <1>;
 935                                 #size-cells = <0>;
 936                                 compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
 937                                 reg = <0x021a0000 0x4000>;
 938                                 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 939                                 clocks = <&clks IMX6UL_CLK_I2C1>;
 940                                 status = "disabled";
 941                         };
 942
 943                         i2c2: i2c@21a4000 {
 944                                 #address-cells = <1>;
 945                                 #size-cells = <0>;
 946                                 compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
 947                                 reg = <0x021a4000 0x4000>;
 948                                 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 949                                 clocks = <&clks IMX6UL_CLK_I2C2>;
 950                                 status = "disabled";
 951                         };
 952
 953                         i2c3: i2c@21a8000 {
 954                                 #address-cells = <1>;
 955                                 #size-cells = <0>;
 956                                 compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
 957                                 reg = <0x021a8000 0x4000>;
 958                                 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 959                                 clocks = <&clks IMX6UL_CLK_I2C3>;
 960                                 status = "disabled";
 961                         };
 962
 963                         memory-controller@21b0000 {
 964                                 compatible = "fsl,imx6ul-mmdc", "fsl,imx6q-mmdc";
 965                                 reg = <0x021b0000 0x4000>;
 966                                 clocks = <&clks IMX6UL_CLK_MMDC_P0_IPG>;
 967                         };
 968
 969                         weim: weim@21b8000 {
 970                                 #address-cells = <2>;
 971                                 #size-cells = <1>;
 972                                 compatible = "fsl,imx6ul-weim", "fsl,imx6q-weim";
 973                                 reg = <0x021b8000 0x4000>;
 974                                 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 975                                 clocks = <&clks IMX6UL_CLK_EIM>;
 976                                 fsl,weim-cs-gpr = <&gpr>;
 977                                 status = "disabled";
 978                         };
 979
 980                         ocotp: efuse@21bc000 {
 981                                 #address-cells = <1>;
 982                                 #size-cells = <1>;
 983                                 compatible = "fsl,imx6ul-ocotp", "syscon";
 984                                 reg = <0x021bc000 0x4000>;
 985                                 clocks = <&clks IMX6UL_CLK_OCOTP>;
 986
 987                                 tempmon_calib: calib@38 {
 988                                         reg = <0x38 4>;
 989                                 };
 990
 991                                 tempmon_temp_grade: temp-grade@20 {
 992                                         reg = <0x20 4>;
 993                                 };
 994
 995                                 cpu_speed_grade: speed-grade@10 {
 996                                         reg = <0x10 4>;
 997                                 };
 998                         };
 999
1000                         csi: csi@21c4000 {
1001                                 compatible = "fsl,imx6ul-csi";
1002                                 reg = <0x021c4000 0x4000>;
1003                                 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
1004                                 clocks = <&clks IMX6UL_CLK_CSI>;
1005                                 clock-names = "mclk";
1006                                 status = "disabled";
1007                         };
1008
1009                         lcdif: lcdif@21c8000 {
1010                                 compatible = "fsl,imx6ul-lcdif", "fsl,imx6sx-lcdif";
1011                                 reg = <0x021c8000 0x4000>;
1012                                 interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
1013                                 clocks = <&clks IMX6UL_CLK_LCDIF_PIX>,
1014                                          <&clks IMX6UL_CLK_LCDIF_APB>,
1015                                          <&clks IMX6UL_CLK_DUMMY>;
1016                                 clock-names = "pix", "axi", "disp_axi";
1017                                 status = "disabled";
1018                         };
1019
1020                         pxp: pxp@21cc000 {
1021                                 compatible = "fsl,imx6ul-pxp";
1022                                 reg = <0x021cc000 0x4000>;
1023                                 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
1024                                 clocks = <&clks IMX6UL_CLK_PXP>;
1025                                 clock-names = "axi";
1026                         };
1027
1028                         qspi: spi@21e0000 {
1029                                 #address-cells = <1>;
1030                                 #size-cells = <0>;
1031                                 compatible = "fsl,imx6ul-qspi";
1032                                 reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>;
1033                                 reg-names = "QuadSPI", "QuadSPI-memory";
1034                                 interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
1035                                 clocks = <&clks IMX6UL_CLK_QSPI>,
1036                                          <&clks IMX6UL_CLK_QSPI>;
1037                                 clock-names = "qspi_en", "qspi";
1038                                 status = "disabled";
1039                         };
1040
1041                         wdog3: watchdog@21e4000 {
1042                                 compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
1043                                 reg = <0x021e4000 0x4000>;
1044                                 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
1045                                 clocks = <&clks IMX6UL_CLK_WDOG3>;
1046                                 status = "disabled";
1047                         };
1048
1049                         uart2: serial@21e8000 {
1050                                 compatible = "fsl,imx6ul-uart",
1051                                              "fsl,imx6q-uart";
1052                                 reg = <0x021e8000 0x4000>;
1053                                 interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
1054                                 clocks = <&clks IMX6UL_CLK_UART2_IPG>,
1055                                          <&clks IMX6UL_CLK_UART2_SERIAL>;
1056                                 clock-names = "ipg", "per";
1057                                 status = "disabled";
1058                         };
1059
1060                         uart3: serial@21ec000 {
1061                                 compatible = "fsl,imx6ul-uart",
1062                                              "fsl,imx6q-uart";
1063                                 reg = <0x021ec000 0x4000>;
1064                                 interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
1065                                 clocks = <&clks IMX6UL_CLK_UART3_IPG>,
1066                                          <&clks IMX6UL_CLK_UART3_SERIAL>;
1067                                 clock-names = "ipg", "per";
1068                                 status = "disabled";
1069                         };
1070
1071                         uart4: serial@21f0000 {
1072                                 compatible = "fsl,imx6ul-uart",
1073                                              "fsl,imx6q-uart";
1074                                 reg = <0x021f0000 0x4000>;
1075                                 interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
1076                                 clocks = <&clks IMX6UL_CLK_UART4_IPG>,
1077                                          <&clks IMX6UL_CLK_UART4_SERIAL>;
1078                                 clock-names = "ipg", "per";
1079                                 status = "disabled";
1080                         };
1081
1082                         uart5: serial@21f4000 {
1083                                 compatible = "fsl,imx6ul-uart",
1084                                              "fsl,imx6q-uart";
1085                                 reg = <0x021f4000 0x4000>;
1086                                 interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
1087                                 clocks = <&clks IMX6UL_CLK_UART5_IPG>,
1088                                          <&clks IMX6UL_CLK_UART5_SERIAL>;
1089                                 clock-names = "ipg", "per";
1090                                 status = "disabled";
1091                         };
1092
1093                         i2c4: i2c@21f8000 {
1094                                 #address-cells = <1>;
1095                                 #size-cells = <0>;
1096                                 compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
1097                                 reg = <0x021f8000 0x4000>;
1098                                 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
1099                                 clocks = <&clks IMX6UL_CLK_I2C4>;
1100                                 status = "disabled";
1101                         };
1102
1103                         uart6: serial@21fc000 {
1104                                 compatible = "fsl,imx6ul-uart",
1105                                              "fsl,imx6q-uart";
1106                                 reg = <0x021fc000 0x4000>;
1107                                 interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
1108                                 clocks = <&clks IMX6UL_CLK_UART6_IPG>,
1109                                          <&clks IMX6UL_CLK_UART6_SERIAL>;
1110                                 clock-names = "ipg", "per";
1111                                 status = "disabled";
1112                         };
1113                 };
1114         };
1115 };