arch/arm/boot/dts/imx6ul-prti6g.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /*
   3  * Copyright (c) 2016 Protonic Holland
   4  * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
   5  */
   6
   7 /dts-v1/;
   8 #include "imx6ul.dtsi"
   9 #include <dt-bindings/gpio/gpio.h>
  10
  11 / {
  12         model = "Protonic PRTI6G Board";
  13         compatible = "prt,prti6g", "fsl,imx6ul";
  14
  15         chosen {
  16                 stdout-path = &uart1;
  17         };
  18
  19         clock_ksz8081_in: clock-ksz8081-in {
  20                 compatible = "fixed-clock";
  21                 #clock-cells = <0>;
  22                 clock-frequency = <25000000>;
  23         };
  24
  25         clock_ksz8081_out: clock-ksz8081-out {
  26                 compatible = "fixed-clock";
  27                 #clock-cells = <0>;
  28                 clock-frequency = <50000000>;
  29         };
  30
  31         leds {
  32                 compatible = "gpio-leds";
  33                 pinctrl-names = "default";
  34                 pinctrl-0 = <&pinctrl_leds>;
  35
  36                 led-0 {
  37                         label = "debug0";
  38                         gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
  39                         linux,default-trigger = "heartbeat";
  40                 };
  41         };
  42
  43         reg_3v2: regulator-3v2 {
  44                 compatible = "regulator-fixed";
  45                 regulator-name = "3v2";
  46                 regulator-min-microvolt = <3200000>;
  47                 regulator-max-microvolt = <3200000>;
  48         };
  49 };
  50
  51 &can1 {
  52         pinctrl-names = "default";
  53         pinctrl-0 = <&pinctrl_can1>;
  54         status = "okay";
  55 };
  56
  57 &can2 {
  58         pinctrl-names = "default";
  59         pinctrl-0 = <&pinctrl_can2>;
  60         status = "okay";
  61 };
  62
  63 &ecspi1 {
  64         cs-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
  65         pinctrl-names = "default";
  66         pinctrl-0 = <&pinctrl_ecspi1>;
  67         status = "okay";
  68
  69         flash@0 {
  70                 compatible = "jedec,spi-nor";
  71                 reg = <0>;
  72                 spi-max-frequency = <20000000>;
  73         };
  74 };
  75
  76 &ecspi2 {
  77         cs-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
  78         pinctrl-names = "default";
  79         pinctrl-0 = <&pinctrl_ecspi2>;
  80         status = "okay";
  81 };
  82
  83 &fec1 {
  84         pinctrl-names = "default";
  85         pinctrl-0 = <&pinctrl_eth1>;
  86         phy-mode = "rmii";
  87         phy-handle = <&rmii_phy>;
  88         clocks = <&clks IMX6UL_CLK_ENET>,
  89                  <&clks IMX6UL_CLK_ENET_AHB>,
  90                  <&clks IMX6UL_CLK_ENET_PTP>,
  91                  <&clock_ksz8081_out>;
  92         clock-names = "ipg", "ahb", "ptp",
  93                       "enet_clk_ref";
  94         status = "okay";
  95
  96         mdio {
  97                 #address-cells = <1>;
  98                 #size-cells = <0>;
  99
 100                 /* Microchip KSZ8081RNA PHY */
 101                 rmii_phy: ethernet-phy@0 {
 102                         reg = <0>;
 103                         interrupts-extended = <&gpio5 1 IRQ_TYPE_LEVEL_LOW>;
 104                         reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
 105                         reset-assert-us = <10000>;
 106                         reset-deassert-us = <300>;
 107                         clocks = <&clock_ksz8081_in>;
 108                         clock-names = "rmii-ref";
 109                 };
 110         };
 111 };
 112
 113 &i2c1 {
 114         pinctrl-names = "default";
 115         pinctrl-0 = <&pinctrl_i2c1>;
 116         clock-frequency = <100000>;
 117         status = "okay";
 118
 119         /* additional i2c devices are added automatically by the boot loader */
 120 };
 121
 122 &i2c2 {
 123         pinctrl-names = "default";
 124         pinctrl-0 = <&pinctrl_i2c2>;
 125         clock-frequency = <100000>;
 126         status = "okay";
 127
 128         adc@49 {
 129                 compatible = "ti,ads1015";
 130                 reg = <0x49>;
 131                 #address-cells = <1>;
 132                 #size-cells = <0>;
 133
 134                 channel@4 {
 135                         reg = <4>;
 136                         ti,gain = <3>;
 137                         ti,datarate = <3>;
 138                 };
 139
 140                 channel@5 {
 141                         reg = <5>;
 142                         ti,gain = <3>;
 143                         ti,datarate = <3>;
 144                 };
 145
 146                 channel@6 {
 147                         reg = <6>;
 148                         ti,gain = <3>;
 149                         ti,datarate = <3>;
 150                 };
 151
 152                 channel@7 {
 153                         reg = <7>;
 154                         ti,gain = <3>;
 155                         ti,datarate = <3>;
 156                 };
 157         };
 158
 159         rtc@51 {
 160                 compatible = "nxp,pcf8563";
 161                 reg = <0x51>;
 162         };
 163
 164         temperature-sensor@70 {
 165                 compatible = "ti,tmp103";
 166                 reg = <0x70>;
 167         };
 168 };
 169
 170 &uart1 {
 171         pinctrl-names = "default";
 172         pinctrl-0 = <&pinctrl_uart1>;
 173         status = "okay";
 174 };
 175
 176 &usbotg1 {
 177         dr_mode = "host";
 178         status = "okay";
 179 };
 180
 181 &usdhc1 {
 182         pinctrl-names = "default";
 183         pinctrl-0 = <&pinctrl_usdhc1>;
 184         cd-gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
 185         vmmc-supply = <&reg_3v2>;
 186         no-1-8-v;
 187         disable-wp;
 188         cap-sd-highspeed;
 189         no-mmc;
 190         no-sdio;
 191         status = "okay";
 192 };
 193
 194 &usdhc2 {
 195         pinctrl-names = "default";
 196         pinctrl-0 = <&pinctrl_usdhc2>;
 197         bus-width = <8>;
 198         no-1-8-v;
 199         non-removable;
 200         no-sd;
 201         no-sdio;
 202         status = "okay";
 203 };
 204
 205 &iomuxc {
 206         pinctrl-names = "default";
 207         pinctrl-0 = <&pinctrl_hog>;
 208
 209         pinctrl_can1: can1grp {
 210                 fsl,pins = <
 211                         MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX              0x0b0b0
 212                         MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX              0x0b0b0
 213                         /* SR */
 214                         MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03              0x0b0b0
 215                         /* TERM */
 216                         MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04              0x0b0b0
 217                         /* nSMBALERT */
 218                         MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02              0x0b0b0
 219                 >;
 220         };
 221
 222         pinctrl_can2: can2grp {
 223                 fsl,pins = <
 224                         MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX              0x0b0b0
 225                         MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX              0x0b0b0
 226                         /* SR */
 227                         MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05              0x0b0b0
 228                 >;
 229         };
 230
 231         pinctrl_ecspi1: ecspi1grp {
 232                 fsl,pins = <
 233                         MX6UL_PAD_CSI_DATA04__ECSPI1_SCLK               0x0b0b0
 234                         MX6UL_PAD_CSI_DATA05__GPIO4_IO26                0x000b1
 235                         MX6UL_PAD_CSI_DATA06__ECSPI1_MOSI               0x0b0b0
 236                         MX6UL_PAD_CSI_DATA07__ECSPI1_MISO               0x0b0b0
 237                 >;
 238         };
 239
 240         pinctrl_ecspi2: ecspi2grp {
 241                 fsl,pins = <
 242                         MX6UL_PAD_CSI_DATA00__ECSPI2_SCLK               0x0b0b0
 243                         MX6UL_PAD_CSI_DATA01__GPIO4_IO22                0x000b1
 244                         MX6UL_PAD_CSI_DATA02__ECSPI2_MOSI               0x0b0b0
 245                         MX6UL_PAD_CSI_DATA03__ECSPI2_MISO               0x0b0b0
 246                 >;
 247         };
 248
 249         pinctrl_eth1: eth1grp {
 250                 fsl,pins = <
 251                         MX6UL_PAD_GPIO1_IO07__ENET1_MDC                 0x1b0b0
 252                         MX6UL_PAD_GPIO1_IO06__ENET1_MDIO                0x100b0
 253                         MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00         0x1b0b0
 254                         MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01         0x1b0b0
 255                         MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN              0x100b0
 256                         MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER              0x1b0b0
 257                         MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN              0x1b0b0
 258                         MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00         0x1b0b0
 259                         MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01         0x1b0b0
 260                         MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1          0x1b000
 261                         /* PHY ENET1_RST */
 262                         MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00              0x00880
 263                         /* PHY ENET1_IRQ */
 264                         MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01              0x00880
 265                 >;
 266         };
 267
 268         pinctrl_hog: hoggrp {
 269                 fsl,pins = <
 270                         /* HW revision detect */
 271                         /* REV_ID0 */
 272                         MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08            0x1b0b0
 273                         /* REV_ID1 */
 274                         MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09            0x1b0b0
 275                         /* REV_ID2 */
 276                         MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10               0x1b0b0
 277                         /* REV_ID3 */
 278                         MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11            0x1b0b0
 279                         /* BOARD_ID0 */
 280                         MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13               0x1b0b0
 281                         /* BOARD_ID1 */
 282                         MX6UL_PAD_ENET2_TX_CLK__GPIO2_IO14              0x1b0b0
 283                         /* BOARD_ID2 */
 284                         MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15               0x1b0b0
 285                         /* BOARD_ID3 */
 286                         MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12            0x1b0b0
 287                         /* Safety controller IO */
 288                         /* WAKE_SC */
 289                         MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06              0x1b0b0
 290                         /* PROGRAM_SC */
 291                         MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07              0x1b0b0
 292                 >;
 293         };
 294
 295         pinctrl_i2c1: i2c1grp {
 296                 fsl,pins = <
 297                         MX6UL_PAD_CSI_MCLK__I2C1_SDA            0x4001b8b0
 298                         MX6UL_PAD_CSI_PIXCLK__I2C1_SCL          0x4001b8b0
 299                 >;
 300         };
 301
 302         pinctrl_i2c2: i2c2grp {
 303                 fsl,pins = <
 304                         MX6UL_PAD_CSI_VSYNC__I2C2_SDA           0x4001b8b0
 305                         MX6UL_PAD_CSI_HSYNC__I2C2_SCL           0x4001b8b0
 306                 >;
 307         };
 308
 309         pinctrl_leds: ledsgrp {
 310                 fsl,pins = <
 311                         MX6UL_PAD_NAND_DQS__GPIO4_IO16                  0x1b0b0
 312                 >;
 313         };
 314
 315         pinctrl_uart1: uart1grp {
 316                 fsl,pins = <
 317                         MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX           0x1b0b1
 318                         MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX           0x1b0b1
 319                 >;
 320         };
 321
 322         pinctrl_usdhc1: usdhc1grp {
 323                 fsl,pins = <
 324                         MX6UL_PAD_SD1_CMD__USDHC1_CMD                   0x070b1
 325                         MX6UL_PAD_SD1_CLK__USDHC1_CLK                   0x07099
 326                         MX6UL_PAD_SD1_DATA0__USDHC1_DATA0               0x070b1
 327                         MX6UL_PAD_SD1_DATA1__USDHC1_DATA1               0x070b1
 328                         MX6UL_PAD_SD1_DATA2__USDHC1_DATA2               0x070b1
 329                         MX6UL_PAD_SD1_DATA3__USDHC1_DATA3               0x070b1
 330                         /* SD1 CD */
 331                         MX6UL_PAD_NAND_READY_B__GPIO4_IO12              0x170b0
 332                 >;
 333         };
 334
 335         pinctrl_usdhc2: usdhc2grp {
 336                 fsl,pins = <
 337                         MX6UL_PAD_NAND_WE_B__USDHC2_CMD                 0x170f9
 338                         MX6UL_PAD_NAND_RE_B__USDHC2_CLK                 0x100f9
 339                         MX6UL_PAD_NAND_DATA00__USDHC2_DATA0             0x170f9
 340                         MX6UL_PAD_NAND_DATA01__USDHC2_DATA1             0x170f9
 341                         MX6UL_PAD_NAND_DATA02__USDHC2_DATA2             0x170f9
 342                         MX6UL_PAD_NAND_DATA03__USDHC2_DATA3             0x170f9
 343                         MX6UL_PAD_NAND_DATA04__USDHC2_DATA4             0x170f9
 344                         MX6UL_PAD_NAND_DATA05__USDHC2_DATA5             0x170f9
 345                         MX6UL_PAD_NAND_DATA06__USDHC2_DATA6             0x170f9
 346                         MX6UL_PAD_NAND_DATA07__USDHC2_DATA7             0x170f9
 347                         MX6UL_PAD_NAND_ALE__USDHC2_RESET_B              0x170b0
 348                 >;
 349         };
 350 };