arch/arm/boot/dts/imx6qdl-udoo.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Copyright 2013 Freescale Semiconductor, Inc.
   4  *
   5  * Author: Fabio Estevam <fabio.estevam@freescale.com>
   6  */
   7
   8 #include <dt-bindings/gpio/gpio.h>
   9
  10 / {
  11         aliases {
  12                 backlight = &backlight;
  13                 panelchan = &panelchan;
  14                 panel7 = &panel7;
  15                 touchscreenp7 = &touchscreenp7;
  16         };
  17
  18         chosen {
  19                 stdout-path = &uart2;
  20         };
  21
  22         backlight: backlight {
  23                 compatible = "gpio-backlight";
  24                 gpios = <&gpio1 4 0>;
  25                 default-on;
  26                 status = "disabled";
  27         };
  28
  29         gpio-poweroff {
  30                 compatible = "gpio-poweroff";
  31                 gpios = <&gpio2 4 0>;
  32                 pinctrl-0 = <&pinctrl_power_off>;
  33                 pinctrl-names = "default";
  34         };
  35
  36         memory@10000000 {
  37                 device_type = "memory";
  38                 reg = <0x10000000 0x40000000>;
  39         };
  40
  41         panel7: panel7 {
  42                 /*
  43                  * in reality it is a -20t (parallel) model,
  44                  * but with LVDS bridge chip attached,
  45                  * so it is equivalent to -19t model in drive
  46                  * characteristics
  47                  */
  48                 compatible = "urt,umsh-8596md-19t";
  49                 pinctrl-names = "default";
  50                 pinctrl-0 = <&pinctrl_panel>;
  51                 power-supply = <&reg_panel>;
  52                 backlight = <&backlight>;
  53                 status = "disabled";
  54
  55                 port {
  56                         panel_in: endpoint {
  57                                 remote-endpoint = <&lvds0_out>;
  58                         };
  59                 };
  60         };
  61
  62         regulators {
  63                 compatible = "simple-bus";
  64                 #address-cells = <1>;
  65                 #size-cells = <0>;
  66
  67                 reg_usb_h1_vbus: regulator@0 {
  68                         compatible = "regulator-fixed";
  69                         reg = <0>;
  70                         regulator-name = "usb_h1_vbus";
  71                         regulator-min-microvolt = <5000000>;
  72                         regulator-max-microvolt = <5000000>;
  73                         enable-active-high;
  74                         startup-delay-us = <2>; /* USB2415 requires a POR of 1 us minimum */
  75                         gpio = <&gpio7 12 0>;
  76                 };
  77
  78                 reg_panel: regulator@1 {
  79                         compatible = "regulator-fixed";
  80                         reg = <1>;
  81                         regulator-name = "lcd_panel";
  82                         enable-active-high;
  83                         gpio = <&gpio1 2 0>;
  84                 };
  85         };
  86
  87         sound {
  88                 compatible = "fsl,imx6q-udoo-ac97",
  89                              "fsl,imx-audio-ac97";
  90                 model = "fsl,imx6q-udoo-ac97";
  91                 audio-cpu = <&ssi1>;
  92                 audio-routing =
  93                         "RX", "Mic Jack",
  94                         "Headphone Jack", "TX";
  95                 mux-int-port = <1>;
  96                 mux-ext-port = <6>;
  97         };
  98 };
  99
 100 &fec {
 101         pinctrl-names = "default";
 102         pinctrl-0 = <&pinctrl_enet>;
 103         phy-mode = "rgmii-id";
 104         status = "okay";
 105 };
 106
 107 &hdmi {
 108         ddc-i2c-bus = <&i2c2>;
 109         status = "okay";
 110 };
 111
 112 &i2c2 {
 113         clock-frequency = <100000>;
 114         pinctrl-names = "default";
 115         pinctrl-0 = <&pinctrl_i2c2>;
 116         status = "okay";
 117 };
 118
 119 &i2c3 {
 120         clock-frequency = <100000>;
 121         pinctrl-names = "default";
 122         pinctrl-0 = <&pinctrl_i2c3>;
 123         status = "okay";
 124
 125         touchscreenp7: touchscreenp7@55 {
 126                 compatible = "sitronix,st1232";
 127                 pinctrl-names = "default";
 128                 pinctrl-0 = <&pinctrl_touchscreenp7>;
 129                 reg = <0x55>;
 130                 interrupt-parent = <&gpio1>;
 131                 interrupts = <13 8>;
 132                 gpios = <&gpio1 15 0>;
 133                 status = "disabled";
 134         };
 135 };
 136
 137 &iomuxc {
 138         imx6q-udoo {
 139                 pinctrl_enet: enetgrp {
 140                         fsl,pins = <
 141                                 MX6QDL_PAD_RGMII_RXC__RGMII_RXC         0x1b030
 142                                 MX6QDL_PAD_RGMII_RD0__RGMII_RD0         0x1b030
 143                                 MX6QDL_PAD_RGMII_RD1__RGMII_RD1         0x1b030
 144                                 MX6QDL_PAD_RGMII_RD2__RGMII_RD2         0x1b030
 145                                 MX6QDL_PAD_RGMII_RD3__RGMII_RD3         0x1b030
 146                                 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL   0x1b030
 147                                 MX6QDL_PAD_RGMII_TXC__RGMII_TXC         0x1b030
 148                                 MX6QDL_PAD_RGMII_TD0__RGMII_TD0         0x1b030
 149                                 MX6QDL_PAD_RGMII_TD1__RGMII_TD1         0x1b030
 150                                 MX6QDL_PAD_RGMII_TD2__RGMII_TD2         0x1b030
 151                                 MX6QDL_PAD_RGMII_TD3__RGMII_TD3         0x1b030
 152                                 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL   0x1b030
 153                                 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK    0x1b0b0
 154                                 MX6QDL_PAD_ENET_MDIO__ENET_MDIO         0x1b0b0
 155                                 MX6QDL_PAD_ENET_MDC__ENET_MDC           0x1b0b0
 156                                 MX6QDL_PAD_GPIO_16__ENET_REF_CLK        0x4001b0a8
 157                         >;
 158                 };
 159
 160                 pinctrl_i2c2: i2c2grp {
 161                         fsl,pins = <
 162                                 MX6QDL_PAD_KEY_COL3__I2C2_SCL           0x4001b8b1
 163                                 MX6QDL_PAD_KEY_ROW3__I2C2_SDA           0x4001b8b1
 164                         >;
 165                 };
 166
 167                 pinctrl_i2c3: i2c3grp {
 168                         fsl,pins = <
 169                                 MX6QDL_PAD_GPIO_5__I2C3_SCL             0x4001f8b1
 170                                 MX6QDL_PAD_GPIO_6__I2C3_SDA             0x4001f8b1
 171                         >;
 172                 };
 173
 174                 pinctrl_panel: panelgrp {
 175                         fsl,pins = <
 176                                 MX6QDL_PAD_GPIO_2__GPIO1_IO02           0x70
 177                                 MX6QDL_PAD_GPIO_4__GPIO1_IO04           0x70
 178                         >;
 179                 };
 180
 181                 pinctrl_power_off: poweroffgrp {
 182                         fsl,pins = <
 183                                 MX6QDL_PAD_NANDF_D4__GPIO2_IO04         0x30
 184                         >;
 185                 };
 186
 187                 pinctrl_touchscreenp7: touchscreenp7grp {
 188                         fsl,pins = <
 189                                 MX6QDL_PAD_SD2_DAT0__GPIO1_IO15         0x70
 190                                 MX6QDL_PAD_SD2_DAT2__GPIO1_IO13         0x1b0b0
 191                         >;
 192                 };
 193
 194                 pinctrl_uart2: uart2grp {
 195                         fsl,pins = <
 196                                 MX6QDL_PAD_EIM_D26__UART2_TX_DATA       0x1b0b1
 197                                 MX6QDL_PAD_EIM_D27__UART2_RX_DATA       0x1b0b1
 198                         >;
 199                 };
 200
 201                 pinctrl_uart4: uart4grp {
 202                         fsl,pins = <
 203                                 MX6QDL_PAD_KEY_COL0__UART4_TX_DATA      0x1b0b1
 204                                 MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA      0x1b0b1
 205                         >;
 206                 };
 207
 208                 pinctrl_usbh: usbhgrp {
 209                         fsl,pins = <
 210                                 MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000
 211                                 MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x130b0
 212                         >;
 213                 };
 214
 215                 pinctrl_usbotg: usbotg {
 216                         fsl,pins = <
 217                                 MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
 218                                 MX6QDL_PAD_EIM_D22__USB_OTG_PWR 0x17059
 219                                 MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x17059
 220                         >;
 221                 };
 222
 223                 pinctrl_usdhc3: usdhc3grp {
 224                         fsl,pins = <
 225                                 MX6QDL_PAD_SD3_CMD__SD3_CMD             0x17059
 226                                 MX6QDL_PAD_SD3_CLK__SD3_CLK             0x10059
 227                                 MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x17059
 228                                 MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x17059
 229                                 MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x17059
 230                                 MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x17059
 231                                 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00         0x1b0b0
 232                         >;
 233                 };
 234
 235                 pinctrl_ac97_running: ac97running {
 236                         fsl,pins = <
 237                                 MX6QDL_PAD_DI0_PIN2__AUD6_TXD           0x1b0b0
 238                                 MX6QDL_PAD_DI0_PIN3__AUD6_TXFS          0x1b0b0
 239                                 MX6QDL_PAD_DI0_PIN4__AUD6_RXD           0x13080
 240                                 MX6QDL_PAD_DI0_PIN15__AUD6_TXC          0x13080
 241                                 MX6QDL_PAD_EIM_EB2__GPIO2_IO30          0x1b0b0
 242                         >;
 243                 };
 244
 245                 pinctrl_ac97_warm_reset: ac97warmreset {
 246                         fsl,pins = <
 247                                 MX6QDL_PAD_DI0_PIN2__AUD6_TXD           0x1b0b0
 248                                 MX6QDL_PAD_DI0_PIN3__GPIO4_IO19         0x1b0b0
 249                                 MX6QDL_PAD_DI0_PIN4__AUD6_RXD           0x13080
 250                                 MX6QDL_PAD_DI0_PIN15__AUD6_TXC          0x13080
 251                                 MX6QDL_PAD_EIM_EB2__GPIO2_IO30          0x1b0b0
 252                         >;
 253                 };
 254
 255                 pinctrl_ac97_reset: ac97reset {
 256                         fsl,pins = <
 257                                 MX6QDL_PAD_DI0_PIN2__GPIO4_IO18         0x1b0b0
 258                                 MX6QDL_PAD_DI0_PIN3__GPIO4_IO19         0x1b0b0
 259                                 MX6QDL_PAD_DI0_PIN4__AUD6_RXD           0x13080
 260                                 MX6QDL_PAD_DI0_PIN15__AUD6_TXC          0x13080
 261                                 MX6QDL_PAD_EIM_EB2__GPIO2_IO30          0x1b0b0
 262                         >;
 263                 };
 264         };
 265 };
 266
 267 &ldb {
 268         status = "okay";
 269
 270         panelchan: lvds-channel@0 {
 271                 port@4 {
 272                         reg = <4>;
 273
 274                         lvds0_out: endpoint {
 275                                 remote-endpoint = <&panel_in>;
 276                         };
 277                 };
 278         };
 279 };
 280
 281 &uart2 {
 282         pinctrl-names = "default";
 283         pinctrl-0 = <&pinctrl_uart2>;
 284         status = "okay";
 285 };
 286
 287 &uart4 {
 288         pinctrl-names = "default";
 289         pinctrl-0 = <&pinctrl_uart4>;
 290         status = "okay";
 291 };
 292
 293 &usbh1 {
 294         pinctrl-names = "default";
 295         pinctrl-0 = <&pinctrl_usbh>;
 296         vbus-supply = <&reg_usb_h1_vbus>;
 297         clocks = <&clks IMX6QDL_CLK_CKO>;
 298         status = "disabled";
 299 };
 300
 301 &usbotg {
 302         pinctrl-names = "default";
 303         pinctrl-0 = <&pinctrl_usbotg>;
 304         status = "okay";
 305 };
 306
 307 &usdhc3 {
 308         pinctrl-names = "default";
 309         pinctrl-0 = <&pinctrl_usdhc3>;
 310         cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 311         status = "okay";
 312 };
 313
 314 &audmux {
 315         status = "okay";
 316 };
 317
 318 &ssi1 {
 319         cell-index = <0>;
 320         fsl,mode = "ac97-slave";
 321         pinctrl-names = "ac97-running", "ac97-reset", "ac97-warm-reset";
 322         pinctrl-0 = <&pinctrl_ac97_running>;
 323         pinctrl-1 = <&pinctrl_ac97_reset>;
 324         pinctrl-2 = <&pinctrl_ac97_warm_reset>;
 325         ac97-gpios = <&gpio4 19 0 &gpio4 18 0 &gpio2 30 0>;
 326         status = "okay";
 327 };