2 * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License
11 * version 2 as published by the Free Software Foundation.
13 * This file is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
20 * b) Permission is hereby granted, free of charge, to any person
21 * obtaining a copy of this software and associated documentation
22 * files (the "Software"), to deal in the Software without
23 * restriction, including without limitation the rights to use,
24 * copy, modify, merge, publish, distribute, sublicense, and/or
25 * sell copies of the Software, and to permit persons to whom the
26 * Software is furnished to do so, subject to the following
29 * The above copyright notice and this permission notice shall be
30 * included in all copies or substantial portions of the Software.
32 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
33 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
34 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
35 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
36 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
37 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
38 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
39 * OTHER DEALINGS IN THE SOFTWARE.
47 backlight: backlight {
48 compatible = "pwm-backlight";
49 pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
50 pinctrl-names = "default";
51 pinctrl-0 = <&pinctrl_lcd1_pwr>;
52 enable-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>;
53 power-supply = <®_3v3>;
54 turn-on-delay-ms = <35>;
56 * a poor man's way to create a 1:1 relationship between
57 * the PWM value and the actual duty cycle
59 brightness-levels = < 0 1 2 3 4 5 6 7 8 9
60 10 11 12 13 14 15 16 17 18 19
61 20 21 22 23 24 25 26 27 28 29
62 30 31 32 33 34 35 36 37 38 39
63 40 41 42 43 44 45 46 47 48 49
64 50 51 52 53 54 55 56 57 58 59
65 60 61 62 63 64 65 66 67 68 69
66 70 71 72 73 74 75 76 77 78 79
67 80 81 82 83 84 85 86 87 88 89
68 90 91 92 93 94 95 96 97 98 99
70 default-brightness-level = <50>;
73 lcd_panel: lcd-panel {
74 compatible = "edt,etm0700g0dh6";
75 pinctrl-names = "default";
76 pinctrl-0 = <&pinctrl_lcd0_pwr>;
77 enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
78 power-supply = <®_3v3>;
79 backlight = <&backlight>;
82 lcd_panel_in: endpoint {
83 remote-endpoint = <&lcd_out>;
89 compatible = "fsl,imx-parallel-display";
92 pinctrl-names = "default";
93 pinctrl-0 = <&pinctrl_disp0_1>;
100 remote-endpoint = <&ipu1_di0_disp0>;
108 remote-endpoint = <&lcd_panel_in>;
114 clock-frequency = <25200000>;
126 pixelclk-active = <0>;
130 u-boot,panel-name = "edt,et057090dhu";
131 clock-frequency = <25200000>;
143 pixelclk-active = <0>;
147 u-boot,panel-name = "edt,et0350g0dh6";
148 clock-frequency = <6413760>;
160 pixelclk-active = <0>;
164 u-boot,panel-name = "edt,et0430g0dh6";
165 clock-frequency = <9009000>;
177 pixelclk-active = <1>;
181 clock-frequency = <33264000>;
193 pixelclk-active = <0>;
196 ET0700 { /* same as ET0500 */
197 u-boot,panel-name = "edt,etm0700g0dh6";
198 clock-frequency = <33264000>;
210 pixelclk-active = <0>;
214 clock-frequency = <6596040>;
226 pixelclk-active = <0>;
229 CoMTFT { /* same as ET0700 but with inverted pixel clock */
230 u-boot,panel-name = "edt,etm0700g0edh6";
231 clock-frequency = <33264000>;
243 pixelclk-active = <1>;
250 remote-endpoint = <&lcd_in>;