arch/arm/boot/dts/imx6qdl-tqma6a.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * Copyright 2013 Sascha Hauer, Pengutronix
   4  * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
   5  */
   6
   7 #include <dt-bindings/gpio/gpio.h>
   8
   9 &fec {
  10         /delete-property/ interrupts;
  11         interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
  12                               <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
  13         fsl,err006687-workaround-present;
  14 };
  15
  16 &i2c1 {
  17         pinctrl-names = "default", "gpio";
  18         pinctrl-0 = <&pinctrl_i2c1>;
  19         pinctrl-1 = <&pinctrl_i2c1_recovery>;
  20         scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
  21         sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
  22         clock-frequency = <100000>;
  23         status = "okay";
  24
  25         pmic: pmic@8 {
  26                 compatible = "fsl,pfuze100";
  27                 reg = <0x08>;
  28         };
  29
  30         sensor@48 {
  31                 compatible = "national,lm75";
  32                 reg = <0x48>;
  33         };
  34
  35         eeprom@50 {
  36                 compatible = "st,24c64", "atmel,24c64";
  37                 reg = <0x50>;
  38                 pagesize = <32>;
  39                 vcc-supply = <&reg_3p3v>;
  40         };
  41 };
  42
  43 &iomuxc {
  44         /*
  45          * This pinmuxing is required for the ERR006687 workaround. Board
  46          * DTS files that enable the FEC controller with
  47          * fsl,err006687-workaround-present must include this group.
  48          */
  49         pinctrl_enet_fix: enetfixgrp {
  50                 fsl,pins = <
  51                         /* ENET ping patch */
  52                         MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
  53                 >;
  54         };
  55 };