arch/arm/boot/dts/imx6qdl-tqma6a.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * Copyright 2013 Sascha Hauer, Pengutronix
   4  * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
   5  */
   6
   7 #include <dt-bindings/gpio/gpio.h>
   8
   9 &fec {
  10         interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
  11                               <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
  12         fsl,err006687-workaround-present;
  13 };
  14
  15 &i2c1 {
  16         pinctrl-names = "default", "gpio";
  17         pinctrl-0 = <&pinctrl_i2c1>;
  18         pinctrl-1 = <&pinctrl_i2c1_recovery>;
  19         scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
  20         sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
  21         clock-frequency = <100000>;
  22         status = "okay";
  23
  24         pmic: pmic@8 {
  25                 compatible = "fsl,pfuze100";
  26                 reg = <0x08>;
  27         };
  28
  29         sensor@48 {
  30                 compatible = "national,lm75";
  31                 reg = <0x48>;
  32         };
  33
  34         eeprom@50 {
  35                 compatible = "st,24c64", "atmel,24c64";
  36                 reg = <0x50>;
  37                 pagesize = <32>;
  38         };
  39 };
  40
  41 &iomuxc {
  42         /*
  43          * This pinmuxing is required for the ERR006687 workaround. Board
  44          * DTS files that enable the FEC controller with
  45          * fsl,err006687-workaround-present must include this group.
  46          */
  47         pinctrl_enet_fix: enetfixgrp {
  48                 fsl,pins = <
  49                         /* ENET ping patch */
  50                         MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
  51                 >;
  52         };
  53 };