arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi

   1 // SPDX-License-Identifier: GPL-2.0 OR X11
   2 /*
   3  * Copyright 2015 Boundary Devices, Inc.
   4  */
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         chosen {
  10                 stdout-path = &uart2;
  11         };
  12
  13         memory@10000000 {
  14                 device_type = "memory";
  15                 reg = <0x10000000 0x20000000>;
  16         };
  17
  18         regulators {
  19                 compatible = "simple-bus";
  20                 #address-cells = <1>;
  21                 #size-cells = <0>;
  22
  23                 reg_2p5v: regulator@0 {
  24                         compatible = "regulator-fixed";
  25                         reg = <0>;
  26                         regulator-name = "2P5V";
  27                         regulator-min-microvolt = <2500000>;
  28                         regulator-max-microvolt = <2500000>;
  29                         regulator-always-on;
  30                 };
  31
  32                 reg_3p3v: regulator@1 {
  33                         compatible = "regulator-fixed";
  34                         reg = <1>;
  35                         regulator-name = "3P3V";
  36                         regulator-min-microvolt = <3300000>;
  37                         regulator-max-microvolt = <3300000>;
  38                         regulator-always-on;
  39                 };
  40
  41                 reg_usb_otg_vbus: regulator@2 {
  42                         compatible = "regulator-fixed";
  43                         reg = <2>;
  44                         regulator-name = "usb_otg_vbus";
  45                         regulator-min-microvolt = <5000000>;
  46                         regulator-max-microvolt = <5000000>;
  47                         gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
  48                         enable-active-high;
  49                 };
  50
  51                 reg_wlan_vmmc: regulator@3 {
  52                         compatible = "regulator-fixed";
  53                         reg = <3>;
  54                         pinctrl-names = "default";
  55                         pinctrl-0 = <&pinctrl_wlan_vmmc>;
  56                         regulator-name = "reg_wlan_vmmc";
  57                         regulator-min-microvolt = <1800000>;
  58                         regulator-max-microvolt = <1800000>;
  59                         gpio = <&gpio6 7 GPIO_ACTIVE_HIGH>;
  60                         startup-delay-us = <70000>;
  61                         enable-active-high;
  62                 };
  63         };
  64
  65         gpio-keys {
  66                 compatible = "gpio-keys";
  67                 pinctrl-names = "default";
  68                 pinctrl-0 = <&pinctrl_gpio_keys>;
  69
  70                 home {
  71                         label = "Home";
  72                         gpios = <&gpio7 13 IRQ_TYPE_LEVEL_LOW>;
  73                         linux,code = <102>;
  74                 };
  75
  76                 back {
  77                         label = "Back";
  78                         gpios = <&gpio4 5 IRQ_TYPE_LEVEL_LOW>;
  79                         linux,code = <158>;
  80                 };
  81         };
  82
  83         leds {
  84                 compatible = "gpio-leds";
  85                 pinctrl-names = "default";
  86                 pinctrl-0 = <&pinctrl_leds>;
  87
  88                 led-j14-pin1 {
  89                         gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
  90                         retain-state-suspended;
  91                         default-state = "off";
  92                 };
  93
  94                 led-j14-pin3 {
  95                         gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
  96                         retain-state-suspended;
  97                         default-state = "off";
  98                 };
  99
 100                 led-j14-pins8-9 {
 101                         gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
 102                         retain-state-suspended;
 103                         default-state = "off";
 104                 };
 105
 106                 led-j46-pin2 {
 107                         gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
 108                         retain-state-suspended;
 109                         default-state = "off";
 110                 };
 111
 112                 led-j46-pin3 {
 113                         gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
 114                         retain-state-suspended;
 115                         default-state = "off";
 116                 };
 117         };
 118
 119         backlight-lcd {
 120                 compatible = "pwm-backlight";
 121                 pwms = <&pwm1 0 5000000>;
 122                 brightness-levels = <0 4 8 16 32 64 128 255>;
 123                 default-brightness-level = <7>;
 124                 power-supply = <&reg_3p3v>;
 125                 status = "okay";
 126         };
 127
 128         backlight_lvds0: backlight-lvds0 {
 129                 compatible = "pwm-backlight";
 130                 pwms = <&pwm4 0 5000000>;
 131                 brightness-levels = <0 4 8 16 32 64 128 255>;
 132                 default-brightness-level = <7>;
 133                 power-supply = <&reg_3p3v>;
 134                 status = "okay";
 135         };
 136
 137         panel-lvds0 {
 138                 compatible = "hannstar,hsd100pxn1";
 139                 backlight = <&backlight_lvds0>;
 140
 141                 port {
 142                         panel_in_lvds0: endpoint {
 143                                 remote-endpoint = <&lvds0_out>;
 144                         };
 145                 };
 146         };
 147
 148         sound {
 149                 compatible = "fsl,imx6dl-nit6xlite-sgtl5000",
 150                              "fsl,imx-audio-sgtl5000";
 151                 model = "imx6dl-nit6xlite-sgtl5000";
 152                 ssi-controller = <&ssi1>;
 153                 audio-codec = <&codec>;
 154                 audio-routing =
 155                         "MIC_IN", "Mic Jack",
 156                         "Mic Jack", "Mic Bias",
 157                         "Headphone Jack", "HP_OUT";
 158                 mux-int-port = <1>;
 159                 mux-ext-port = <3>;
 160         };
 161 };
 162
 163 &audmux {
 164         pinctrl-names = "default";
 165         pinctrl-0 = <&pinctrl_audmux>;
 166         status = "okay";
 167 };
 168
 169 &clks {
 170         assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
 171                           <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
 172         assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
 173                                  <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
 174 };
 175
 176 &ecspi1 {
 177         cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
 178         pinctrl-names = "default";
 179         pinctrl-0 = <&pinctrl_ecspi1>;
 180         status = "okay";
 181
 182         flash: flash@0 {
 183                 compatible = "microchip,sst25vf016b";
 184                 spi-max-frequency = <20000000>;
 185                 reg = <0>;
 186         };
 187 };
 188
 189 &fec {
 190         pinctrl-names = "default";
 191         pinctrl-0 = <&pinctrl_enet>;
 192         phy-mode = "rgmii";
 193         phy-handle = <&ethphy>;
 194         phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
 195         /delete-property/ interrupts;
 196         interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 197                               <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 198         fsl,err006687-workaround-present;
 199         status = "okay";
 200
 201         mdio {
 202                 #address-cells = <1>;
 203                 #size-cells = <0>;
 204
 205                 ethphy: ethernet-phy {
 206                         compatible = "ethernet-phy-ieee802.3-c22";
 207                         txen-skew-ps = <0>;
 208                         txc-skew-ps = <3000>;
 209                         rxdv-skew-ps = <0>;
 210                         rxc-skew-ps = <3000>;
 211                         rxd0-skew-ps = <0>;
 212                         rxd1-skew-ps = <0>;
 213                         rxd2-skew-ps = <0>;
 214                         rxd3-skew-ps = <0>;
 215                         txd0-skew-ps = <0>;
 216                         txd1-skew-ps = <0>;
 217                         txd2-skew-ps = <0>;
 218                         txd3-skew-ps = <0>;
 219                 };
 220         };
 221 };
 222
 223 &hdmi {
 224         ddc-i2c-bus = <&i2c2>;
 225         status = "okay";
 226 };
 227
 228 &i2c1 {
 229         clock-frequency = <100000>;
 230         pinctrl-names = "default";
 231         pinctrl-0 = <&pinctrl_i2c1>;
 232         status = "okay";
 233
 234         codec: sgtl5000@a {
 235                 compatible = "fsl,sgtl5000";
 236                 pinctrl-names = "default";
 237                 pinctrl-0 = <&pinctrl_sgtl5000>;
 238                 reg = <0x0a>;
 239                 clocks = <&clks IMX6QDL_CLK_CKO>;
 240                 VDDA-supply = <&reg_2p5v>;
 241                 VDDIO-supply = <&reg_3p3v>;
 242         };
 243 };
 244
 245 &i2c2 {
 246         clock-frequency = <100000>;
 247         pinctrl-names = "default";
 248         pinctrl-0 = <&pinctrl_i2c2>;
 249         status = "okay";
 250 };
 251
 252 &i2c3 {
 253         clock-frequency = <100000>;
 254         pinctrl-names = "default";
 255         pinctrl-0 = <&pinctrl_i2c3>;
 256         status = "okay";
 257
 258         touchscreen@4 {
 259                 compatible = "eeti,egalax_ts";
 260                 reg = <0x04>;
 261                 interrupt-parent = <&gpio1>;
 262                 interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
 263                 wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
 264         };
 265
 266         touchscreen@38 {
 267                 compatible = "edt,edt-ft5x06";
 268                 reg = <0x38>;
 269                 interrupt-parent = <&gpio1>;
 270                 interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
 271                 wakeup-source;
 272         };
 273
 274         rtc@6f {
 275                 compatible = "isil,isl1208";
 276                 pinctrl-names = "default";
 277                 pinctrl-0 = <&pinctrl_rtc>;
 278                 reg = <0x6f>;
 279                 interrupts-extended = <&gpio2 26 IRQ_TYPE_LEVEL_LOW>;
 280         };
 281 };
 282
 283 &iomuxc {
 284         pinctrl-names = "default";
 285         pinctrl-0 = <&pinctrl_j10>;
 286         pinctrl-1 = <&pinctrl_j28>;
 287
 288         imx6dl-nit6xlite {
 289                 pinctrl_audmux: audmuxgrp {
 290                         fsl,pins = <
 291                                 MX6QDL_PAD_CSI0_DAT7__AUD3_RXD          0x130b0
 292                                 MX6QDL_PAD_CSI0_DAT4__AUD3_TXC          0x130b0
 293                                 MX6QDL_PAD_CSI0_DAT5__AUD3_TXD          0x110b0
 294                                 MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS         0x130b0
 295                         >;
 296                 };
 297
 298                 pinctrl_ecspi1: ecspi1grp {
 299                         fsl,pins = <
 300                                 MX6QDL_PAD_EIM_D17__ECSPI1_MISO         0x100b1
 301                                 MX6QDL_PAD_EIM_D18__ECSPI1_MOSI         0x100b1
 302                                 MX6QDL_PAD_EIM_D16__ECSPI1_SCLK         0x100b1
 303                                 MX6QDL_PAD_EIM_D19__GPIO3_IO19          0x000b1
 304                         >;
 305                 };
 306
 307                 pinctrl_enet: enetgrp {
 308                         fsl,pins = <
 309                                 MX6QDL_PAD_ENET_MDIO__ENET_MDIO         0x100b0
 310                                 MX6QDL_PAD_ENET_MDC__ENET_MDC           0x100b0
 311                                 MX6QDL_PAD_RGMII_TXC__RGMII_TXC         0x100b0
 312                                 MX6QDL_PAD_RGMII_TD0__RGMII_TD0         0x100b0
 313                                 MX6QDL_PAD_RGMII_TD1__RGMII_TD1         0x100b0
 314                                 MX6QDL_PAD_RGMII_TD2__RGMII_TD2         0x100b0
 315                                 MX6QDL_PAD_RGMII_TD3__RGMII_TD3         0x100b0
 316                                 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL   0x100b0
 317                                 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK    0x100b0
 318                                 MX6QDL_PAD_RGMII_RXC__RGMII_RXC         0x1b030
 319                                 MX6QDL_PAD_RGMII_RD0__RGMII_RD0         0x1b030
 320                                 MX6QDL_PAD_RGMII_RD1__RGMII_RD1         0x1b030
 321                                 MX6QDL_PAD_RGMII_RD2__RGMII_RD2         0x1b030
 322                                 MX6QDL_PAD_RGMII_RD3__RGMII_RD3         0x1b030
 323                                 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL   0x1b030
 324                                 /* Phy reset */
 325                                 MX6QDL_PAD_ENET_RXD0__GPIO1_IO27        0x0f0b0
 326                                 MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28       0x1b0b0
 327                                 MX6QDL_PAD_GPIO_6__ENET_IRQ             0x000b1
 328                         >;
 329                 };
 330
 331                 pinctrl_gpio_keys: gpio-keysgrp {
 332                         fsl,pins = <
 333                                 /* Home Button: J14 pin 5 */
 334                                 MX6QDL_PAD_GPIO_18__GPIO7_IO13          0x1b0b0
 335                                 /* Back Button: J14 pin 7 */
 336                                 MX6QDL_PAD_GPIO_19__GPIO4_IO05          0x1b0b0
 337                         >;
 338                 };
 339
 340                 pinctrl_i2c1: i2c1grp {
 341                         fsl,pins = <
 342                                 MX6QDL_PAD_EIM_D21__I2C1_SCL    0x4001b8b1
 343                                 MX6QDL_PAD_EIM_D28__I2C1_SDA    0x4001b8b1
 344                         >;
 345                 };
 346
 347                 pinctrl_i2c2: i2c2grp {
 348                         fsl,pins = <
 349                                 MX6QDL_PAD_KEY_COL3__I2C2_SCL   0x4001b8b1
 350                                 MX6QDL_PAD_KEY_ROW3__I2C2_SDA   0x4001b8b1
 351                         >;
 352                 };
 353
 354                 pinctrl_i2c3: i2c3grp {
 355                         fsl,pins = <
 356                                 MX6QDL_PAD_GPIO_5__I2C3_SCL     0x4001b8b1
 357                                 MX6QDL_PAD_GPIO_16__I2C3_SDA    0x4001b8b1
 358                                 /* Touch IRQ: J7 pin 4 */
 359                                 MX6QDL_PAD_GPIO_9__GPIO1_IO09   0x1b0b0
 360                                 /* tcs2004 IRQ */
 361                                 MX6QDL_PAD_EIM_LBA__GPIO2_IO27  0x1b0b0
 362                                 /* tsc2004 reset */
 363                                 MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x0b0b0
 364                         >;
 365                 };
 366
 367                 pinctrl_j10: j10grp {
 368                         fsl,pins = <
 369                                 /* Broadcom WiFi module pins */
 370                                 MX6QDL_PAD_NANDF_D0__GPIO2_IO00         0x1b0b0
 371                                 MX6QDL_PAD_NANDF_D1__GPIO2_IO01         0x1b0b0
 372                                 MX6QDL_PAD_NANDF_D3__GPIO2_IO03         0x1b0b0
 373                                 MX6QDL_PAD_NANDF_D4__GPIO2_IO04         0x1b0b0
 374                                 MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09       0x0b0b0
 375                                 MX6QDL_PAD_NANDF_CS1__GPIO6_IO14        0x1b0b0
 376                                 MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT      0x000b0
 377                         >;
 378                 };
 379
 380                 pinctrl_j28: j28grp {
 381                         fsl,pins = <
 382                                 MX6QDL_PAD_GPIO_4__GPIO1_IO04           0x1b0b0
 383                         >;
 384                 };
 385
 386                 pinctrl_leds: ledsgrp {
 387                         fsl,pins = <
 388                                 MX6QDL_PAD_GPIO_2__GPIO1_IO02           0x0b0b0
 389                                 MX6QDL_PAD_GPIO_3__GPIO1_IO03           0x0b0b0
 390                                 MX6QDL_PAD_EIM_D29__GPIO3_IO29          0x030b0
 391                                 MX6QDL_PAD_GPIO_7__GPIO1_IO07           0x0b0b0
 392                                 MX6QDL_PAD_GPIO_8__GPIO1_IO08           0x0b0b0
 393                         >;
 394                 };
 395
 396                 pinctrl_pwm1: pwm1grp {
 397                         fsl,pins = <
 398                                 MX6QDL_PAD_SD1_DAT3__PWM1_OUT           0x1b0b1
 399                         >;
 400                 };
 401
 402                 pinctrl_pwm3: pwm3grp {
 403                         fsl,pins = <
 404                                 MX6QDL_PAD_SD1_DAT1__PWM3_OUT           0x1b0b1
 405                         >;
 406                 };
 407
 408                 pinctrl_pwm4: pwm4grp {
 409                         fsl,pins = <
 410                                 MX6QDL_PAD_SD1_CMD__PWM4_OUT            0x1b0b1
 411                         >;
 412                 };
 413
 414                 pinctrl_wlan_vmmc: wlan-vmmcgrp {
 415                         fsl,pins = <
 416                                 MX6QDL_PAD_NANDF_CLE__GPIO6_IO07        0x030b0
 417                         >;
 418                 };
 419
 420                 pinctrl_rtc: rtcgrp {
 421                         fsl,pins = <
 422                                 MX6QDL_PAD_EIM_RW__GPIO2_IO26           0x1b0b0
 423                         >;
 424                 };
 425
 426                 pinctrl_sgtl5000: sgtl5000grp {
 427                         fsl,pins = <
 428                                 MX6QDL_PAD_GPIO_0__CCM_CLKO1            0x000b0
 429                                 MX6QDL_PAD_EIM_A25__GPIO5_IO02          0x1b0b0
 430                         >;
 431                 };
 432
 433                 pinctrl_uart1: uart1grp {
 434                         fsl,pins = <
 435                                 MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA      0x1b0b1
 436                                 MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA      0x1b0b1
 437                         >;
 438                 };
 439
 440                 pinctrl_uart2: uart2grp {
 441                         fsl,pins = <
 442                                 MX6QDL_PAD_EIM_D26__UART2_TX_DATA       0x1b0b1
 443                                 MX6QDL_PAD_EIM_D27__UART2_RX_DATA       0x1b0b1
 444                         >;
 445                 };
 446
 447                 pinctrl_uart3: uart3grp {
 448                         fsl,pins = <
 449                                 MX6QDL_PAD_EIM_D24__UART3_TX_DATA       0x1b0b1
 450                                 MX6QDL_PAD_EIM_D25__UART3_RX_DATA       0x1b0b1
 451                                 MX6QDL_PAD_EIM_D23__UART3_CTS_B         0x1b0b1
 452                                 MX6QDL_PAD_EIM_D31__UART3_RTS_B         0x1b0b1
 453                         >;
 454                 };
 455
 456                 pinctrl_usbotg: usbotggrp {
 457                         fsl,pins = <
 458                                 MX6QDL_PAD_GPIO_1__USB_OTG_ID           0x17059
 459                                 MX6QDL_PAD_KEY_COL4__USB_OTG_OC         0x1b0b0
 460                                 /* power enable, high active */
 461                                 MX6QDL_PAD_EIM_D22__GPIO3_IO22          0x000b0
 462                         >;
 463                 };
 464
 465                 pinctrl_usdhc2: usdhc2grp {
 466                         fsl,pins = <
 467                                 MX6QDL_PAD_SD2_CMD__SD2_CMD             0x17059
 468                                 MX6QDL_PAD_SD2_CLK__SD2_CLK             0x10059
 469                                 MX6QDL_PAD_SD2_DAT0__SD2_DATA0          0x17059
 470                                 MX6QDL_PAD_SD2_DAT1__SD2_DATA1          0x17059
 471                                 MX6QDL_PAD_SD2_DAT2__SD2_DATA2          0x17059
 472                                 MX6QDL_PAD_SD2_DAT3__SD2_DATA3          0x17059
 473                         >;
 474                 };
 475
 476                 pinctrl_usdhc3: usdhc3grp {
 477                         fsl,pins = <
 478                                 MX6QDL_PAD_SD3_CMD__SD3_CMD             0x17059
 479                                 MX6QDL_PAD_SD3_CLK__SD3_CLK             0x10059
 480                                 MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x17059
 481                                 MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x17059
 482                                 MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x17059
 483                                 MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x17059
 484                                 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00         0x1b0b0
 485                         >;
 486                 };
 487         };
 488 };
 489
 490 &ldb {
 491         status = "okay";
 492
 493         lvds-channel@0 {
 494                 status = "okay";
 495
 496                 port@4 {
 497                         reg = <4>;
 498
 499                         lvds0_out: endpoint {
 500                                 remote-endpoint = <&panel_in_lvds0>;
 501                         };
 502                 };
 503         };
 504 };
 505
 506 &pcie {
 507         status = "okay";
 508 };
 509
 510 &pwm1 {
 511         #pwm-cells = <2>;
 512         pinctrl-names = "default";
 513         pinctrl-0 = <&pinctrl_pwm1>;
 514         status = "okay";
 515 };
 516
 517 &pwm3 {
 518         pinctrl-names = "default";
 519         pinctrl-0 = <&pinctrl_pwm3>;
 520         status = "okay";
 521 };
 522
 523 &pwm4 {
 524         #pwm-cells = <2>;
 525         pinctrl-names = "default";
 526         pinctrl-0 = <&pinctrl_pwm4>;
 527         status = "okay";
 528 };
 529
 530 &ssi1 {
 531         status = "okay";
 532 };
 533
 534 &uart1 {
 535         pinctrl-names = "default";
 536         pinctrl-0 = <&pinctrl_uart1>;
 537         status = "okay";
 538 };
 539
 540 &uart2 {
 541         pinctrl-names = "default";
 542         pinctrl-0 = <&pinctrl_uart2>;
 543         status = "okay";
 544 };
 545
 546 &uart3 {
 547         pinctrl-names = "default";
 548         pinctrl-0 = <&pinctrl_uart3>;
 549         uart-has-rtscts;
 550         status = "okay";
 551 };
 552
 553 &usbh1 {
 554         status = "okay";
 555 };
 556
 557 &usbotg {
 558         vbus-supply = <&reg_usb_otg_vbus>;
 559         pinctrl-names = "default";
 560         pinctrl-0 = <&pinctrl_usbotg>;
 561         disable-over-current;
 562         status = "okay";
 563 };
 564
 565 &usdhc2 {
 566         pinctrl-names = "default";
 567         pinctrl-0 = <&pinctrl_usdhc2>;
 568         bus-width = <4>;
 569         non-removable;
 570         vmmc-supply = <&reg_3p3v>;
 571         vqmmc-supply = <&reg_wlan_vmmc>;
 572         cap-power-off-card;
 573         keep-power-in-suspend;
 574         status = "okay";
 575 };
 576
 577 &usdhc3 {
 578         pinctrl-names = "default";
 579         pinctrl-0 = <&pinctrl_usdhc3>;
 580         cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 581         vmmc-supply = <&reg_3p3v>;
 582         status = "okay";
 583 };