arch/arm/boot/dts/imx6qdl-gw552x.dtsi

   1 /*
   2  * Copyright 2014 Gateworks Corporation
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 #include <dt-bindings/gpio/gpio.h>
  13
  14 / {
  15         /* these are used by bootloader for disabling nodes */
  16         aliases {
  17                 led0 = &led0;
  18                 led1 = &led1;
  19                 led2 = &led2;
  20                 nand = &gpmi;
  21                 usb0 = &usbh1;
  22                 usb1 = &usbotg;
  23         };
  24
  25         chosen {
  26                 bootargs = "console=ttymxc1,115200";
  27         };
  28
  29         leds {
  30                 compatible = "gpio-leds";
  31                 pinctrl-names = "default";
  32                 pinctrl-0 = <&pinctrl_gpio_leds>;
  33
  34                 led0: user1 {
  35                         label = "user1";
  36                         gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
  37                         default-state = "on";
  38                         linux,default-trigger = "heartbeat";
  39                 };
  40
  41                 led1: user2 {
  42                         label = "user2";
  43                         gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
  44                         default-state = "off";
  45                 };
  46
  47                 led2: user3 {
  48                         label = "user3";
  49                         gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
  50                         default-state = "off";
  51                 };
  52         };
  53
  54         memory@10000000 {
  55                 reg = <0x10000000 0x20000000>;
  56         };
  57
  58         reg_1p0v: regulator-1p0v {
  59                 compatible = "regulator-fixed";
  60                 regulator-name = "1P0V";
  61                 regulator-min-microvolt = <1000000>;
  62                 regulator-max-microvolt = <1000000>;
  63                 regulator-always-on;
  64         };
  65
  66         reg_3p3v: regulator-3p3v {
  67                 compatible = "regulator-fixed";
  68                 regulator-name = "3P3V";
  69                 regulator-min-microvolt = <3300000>;
  70                 regulator-max-microvolt = <3300000>;
  71                 regulator-always-on;
  72         };
  73
  74         reg_5p0v: regulator-5p0v {
  75                 compatible = "regulator-fixed";
  76                 regulator-name = "5P0V";
  77                 regulator-min-microvolt = <5000000>;
  78                 regulator-max-microvolt = <5000000>;
  79                 regulator-always-on;
  80         };
  81 };
  82
  83 &gpmi {
  84         pinctrl-names = "default";
  85         pinctrl-0 = <&pinctrl_gpmi_nand>;
  86         status = "okay";
  87 };
  88
  89 &hdmi {
  90         ddc-i2c-bus = <&i2c3>;
  91         status = "okay";
  92 };
  93
  94 &i2c1 {
  95         clock-frequency = <100000>;
  96         pinctrl-names = "default";
  97         pinctrl-0 = <&pinctrl_i2c1>;
  98         status = "okay";
  99
 100         eeprom1: eeprom@50 {
 101                 compatible = "atmel,24c02";
 102                 reg = <0x50>;
 103                 pagesize = <16>;
 104         };
 105
 106         eeprom2: eeprom@51 {
 107                 compatible = "atmel,24c02";
 108                 reg = <0x51>;
 109                 pagesize = <16>;
 110         };
 111
 112         eeprom3: eeprom@52 {
 113                 compatible = "atmel,24c02";
 114                 reg = <0x52>;
 115                 pagesize = <16>;
 116         };
 117
 118         eeprom4: eeprom@53 {
 119                 compatible = "atmel,24c02";
 120                 reg = <0x53>;
 121                 pagesize = <16>;
 122         };
 123
 124         gpio: pca9555@23 {
 125                 compatible = "nxp,pca9555";
 126                 reg = <0x23>;
 127                 gpio-controller;
 128                 #gpio-cells = <2>;
 129         };
 130
 131         rtc: ds1672@68 {
 132                 compatible = "dallas,ds1672";
 133                 reg = <0x68>;
 134         };
 135 };
 136
 137 &i2c2 {
 138         clock-frequency = <100000>;
 139         pinctrl-names = "default";
 140         pinctrl-0 = <&pinctrl_i2c2>;
 141         status = "okay";
 142
 143         ltc3676: pmic@3c {
 144                 compatible = "lltc,ltc3676";
 145                 reg = <0x3c>;
 146                 pinctrl-names = "default";
 147                 pinctrl-0 = <&pinctrl_pmic>;
 148                 interrupt-parent = <&gpio1>;
 149                 interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
 150
 151                 regulators {
 152                         /* VDD_SOC (1+R1/R2 = 1.635) */
 153                         reg_vdd_soc: sw1 {
 154                                 regulator-name = "vddsoc";
 155                                 regulator-min-microvolt = <674400>;
 156                                 regulator-max-microvolt = <1308000>;
 157                                 lltc,fb-voltage-divider = <127000 200000>;
 158                                 regulator-ramp-delay = <7000>;
 159                                 regulator-boot-on;
 160                                 regulator-always-on;
 161                         };
 162
 163                         /* VDD_1P8 (1+R1/R2 = 2.505): ENET-PHY */
 164                         reg_1p8v: sw2 {
 165                                 regulator-name = "vdd1p8";
 166                                 regulator-min-microvolt = <1033310>;
 167                                 regulator-max-microvolt = <2004000>;
 168                                 lltc,fb-voltage-divider = <301000 200000>;
 169                                 regulator-ramp-delay = <7000>;
 170                                 regulator-boot-on;
 171                                 regulator-always-on;
 172                         };
 173
 174                         /* VDD_ARM (1+R1/R2 = 1.635) */
 175                         reg_vdd_arm: sw3 {
 176                                 regulator-name = "vddarm";
 177                                 regulator-min-microvolt = <674400>;
 178                                 regulator-max-microvolt = <1308000>;
 179                                 lltc,fb-voltage-divider = <127000 200000>;
 180                                 regulator-ramp-delay = <7000>;
 181                                 regulator-boot-on;
 182                                 regulator-always-on;
 183                         };
 184
 185                         /* VDD_DDR (1+R1/R2 = 2.105) */
 186                         reg_vdd_ddr: sw4 {
 187                                 regulator-name = "vddddr";
 188                                 regulator-min-microvolt = <868310>;
 189                                 regulator-max-microvolt = <1684000>;
 190                                 lltc,fb-voltage-divider = <221000 200000>;
 191                                 regulator-ramp-delay = <7000>;
 192                                 regulator-boot-on;
 193                                 regulator-always-on;
 194                         };
 195
 196                         /* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */
 197                         reg_2p5v: ldo2 {
 198                                 regulator-name = "vdd2p5";
 199                                 regulator-min-microvolt = <2490375>;
 200                                 regulator-max-microvolt = <2490375>;
 201                                 lltc,fb-voltage-divider = <487000 200000>;
 202                                 regulator-boot-on;
 203                                 regulator-always-on;
 204                         };
 205
 206                         /* VDD_HIGH (1+R1/R2 = 4.17) */
 207                         reg_3p0v: ldo4 {
 208                                 regulator-name = "vdd3p0";
 209                                 regulator-min-microvolt = <3023250>;
 210                                 regulator-max-microvolt = <3023250>;
 211                                 lltc,fb-voltage-divider = <634000 200000>;
 212                                 regulator-boot-on;
 213                                 regulator-always-on;
 214                         };
 215                 };
 216         };
 217 };
 218
 219 &i2c3 {
 220         clock-frequency = <100000>;
 221         pinctrl-names = "default";
 222         pinctrl-0 = <&pinctrl_i2c3>;
 223         status = "okay";
 224 };
 225
 226 &pcie {
 227         pinctrl-names = "default";
 228         pinctrl-0 = <&pinctrl_pcie>;
 229         reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
 230         status = "okay";
 231 };
 232
 233 &pwm2 {
 234         pinctrl-names = "default";
 235         pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
 236         status = "disabled";
 237 };
 238
 239 &pwm3 {
 240         pinctrl-names = "default";
 241         pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
 242         status = "disabled";
 243 };
 244
 245 &uart2 {
 246         pinctrl-names = "default";
 247         pinctrl-0 = <&pinctrl_uart2>;
 248         status = "okay";
 249 };
 250
 251 &uart3 {
 252         pinctrl-names = "default";
 253         pinctrl-0 = <&pinctrl_uart3>;
 254         status = "okay";
 255 };
 256
 257 &uart5 {
 258         pinctrl-names = "default";
 259         pinctrl-0 = <&pinctrl_uart5>;
 260         status = "okay"; };
 261
 262 &usbh1 {
 263         status = "okay";
 264 };
 265
 266 &wdog1 {
 267         pinctrl-names = "default";
 268         pinctrl-0 = <&pinctrl_wdog>;
 269         fsl,ext-reset-output;
 270 };
 271
 272 &iomuxc {
 273         pinctrl_gpio_leds: gpioledsgrp {
 274                 fsl,pins = <
 275                         MX6QDL_PAD_KEY_COL0__GPIO4_IO06         0x1b0b0
 276                         MX6QDL_PAD_KEY_ROW0__GPIO4_IO07         0x1b0b0
 277                         MX6QDL_PAD_KEY_ROW4__GPIO4_IO15         0x1b0b0
 278                 >;
 279         };
 280
 281         pinctrl_gpmi_nand: gpminandgrp {
 282                 fsl,pins = <
 283                         MX6QDL_PAD_NANDF_CLE__NAND_CLE          0xb0b1
 284                         MX6QDL_PAD_NANDF_ALE__NAND_ALE          0xb0b1
 285                         MX6QDL_PAD_NANDF_WP_B__NAND_WP_B        0xb0b1
 286                         MX6QDL_PAD_NANDF_RB0__NAND_READY_B      0xb000
 287                         MX6QDL_PAD_NANDF_CS0__NAND_CE0_B        0xb0b1
 288                         MX6QDL_PAD_SD4_CMD__NAND_RE_B           0xb0b1
 289                         MX6QDL_PAD_SD4_CLK__NAND_WE_B           0xb0b1
 290                         MX6QDL_PAD_NANDF_D0__NAND_DATA00        0xb0b1
 291                         MX6QDL_PAD_NANDF_D1__NAND_DATA01        0xb0b1
 292                         MX6QDL_PAD_NANDF_D2__NAND_DATA02        0xb0b1
 293                         MX6QDL_PAD_NANDF_D3__NAND_DATA03        0xb0b1
 294                         MX6QDL_PAD_NANDF_D4__NAND_DATA04        0xb0b1
 295                         MX6QDL_PAD_NANDF_D5__NAND_DATA05        0xb0b1
 296                         MX6QDL_PAD_NANDF_D6__NAND_DATA06        0xb0b1
 297                         MX6QDL_PAD_NANDF_D7__NAND_DATA07        0xb0b1
 298                 >;
 299         };
 300
 301         pinctrl_i2c1: i2c1grp {
 302                 fsl,pins = <
 303                         MX6QDL_PAD_EIM_D21__I2C1_SCL            0x4001b8b1
 304                         MX6QDL_PAD_EIM_D28__I2C1_SDA            0x4001b8b1
 305                 >;
 306         };
 307
 308         pinctrl_i2c2: i2c2grp {
 309                 fsl,pins = <
 310                         MX6QDL_PAD_KEY_COL3__I2C2_SCL           0x4001b8b1
 311                         MX6QDL_PAD_KEY_ROW3__I2C2_SDA           0x4001b8b1
 312                 >;
 313         };
 314
 315         pinctrl_i2c3: i2c3grp {
 316                 fsl,pins = <
 317                         MX6QDL_PAD_GPIO_3__I2C3_SCL             0x4001b8b1
 318                         MX6QDL_PAD_GPIO_6__I2C3_SDA             0x4001b8b1
 319                 >;
 320         };
 321
 322         pinctrl_pcie: pciegrp {
 323                 fsl,pins = <
 324                         MX6QDL_PAD_ENET_TXD1__GPIO1_IO29        0x1b0b0
 325                 >;
 326         };
 327
 328         pinctrl_pmic: pmicgrp {
 329                 fsl,pins = <
 330                         MX6QDL_PAD_GPIO_8__GPIO1_IO08           0x0001b0b0 /* PMIC_IRQ# */
 331                 >;
 332         };
 333
 334         pinctrl_pwm2: pwm2grp {
 335                 fsl,pins = <
 336                         MX6QDL_PAD_SD1_DAT2__PWM2_OUT           0x1b0b1
 337                 >;
 338         };
 339
 340         pinctrl_pwm3: pwm3grp {
 341                 fsl,pins = <
 342                         MX6QDL_PAD_SD1_DAT1__PWM3_OUT           0x1b0b1
 343                 >;
 344         };
 345
 346         pinctrl_uart2: uart2grp {
 347                 fsl,pins = <
 348                         MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA      0x1b0b1
 349                         MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA      0x1b0b1
 350                 >;
 351         };
 352
 353         pinctrl_uart3: uart3grp {
 354                 fsl,pins = <
 355                         MX6QDL_PAD_EIM_D24__UART3_TX_DATA       0x1b0b1
 356                         MX6QDL_PAD_EIM_D25__UART3_RX_DATA       0x1b0b1
 357                 >;
 358         };
 359
 360         pinctrl_uart5: uart5grp {
 361                 fsl,pins = <
 362                         MX6QDL_PAD_KEY_COL1__UART5_TX_DATA      0x1b0b1
 363                         MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA      0x1b0b1
 364                 >;
 365         };
 366
 367         pinctrl_wdog: wdoggrp {
 368                 fsl,pins = <
 369                         MX6QDL_PAD_DISP0_DAT8__WDOG1_B          0x1b0b0
 370                 >;
 371         };
 372 };