arch/arm/boot/dts/imx6qdl-dhcom-som.dtsi

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * Copyright (C) 2015-2021 DH electronics GmbH
   4  * Copyright (C) 2018 Marek Vasut <marex@denx.de>
   5  */
   6
   7 #include <dt-bindings/pwm/pwm.h>
   8 #include <dt-bindings/gpio/gpio.h>
   9 #include <dt-bindings/clock/imx6qdl-clock.h>
  10 #include <dt-bindings/input/input.h>
  11
  12 / {
  13         aliases {
  14                 i2c0 = &i2c2;
  15                 i2c1 = &i2c1;
  16                 i2c2 = &i2c3;
  17                 mmc0 = &usdhc2;
  18                 mmc1 = &usdhc3;
  19                 mmc2 = &usdhc4;
  20                 mmc3 = &usdhc1;
  21                 rtc0 = &rtc_i2c;
  22                 rtc1 = &snvs_rtc;
  23                 serial0 = &uart1;
  24                 serial1 = &uart5;
  25                 serial2 = &uart4;
  26                 serial3 = &uart2;
  27                 serial4 = &uart3;
  28         };
  29
  30         memory@10000000 { /* Appropriate memory size will be filled by U-Boot */
  31                 device_type = "memory";
  32                 reg = <0x10000000 0x20000000>;
  33         };
  34
  35         reg_3p3v: regulator-3P3V {
  36                 compatible = "regulator-fixed";
  37                 regulator-always-on;
  38                 regulator-min-microvolt = <3300000>;
  39                 regulator-max-microvolt = <3300000>;
  40                 regulator-name = "3P3V";
  41         };
  42
  43         reg_eth_vio: regulator-eth-vio {
  44                 compatible = "regulator-fixed";
  45                 gpio = <&gpio1 7 0>;
  46                 pinctrl-0 = <&pinctrl_enet_vio>;
  47                 pinctrl-names = "default";
  48                 regulator-always-on;
  49                 regulator-boot-on;
  50                 regulator-min-microvolt = <3300000>;
  51                 regulator-max-microvolt = <3300000>;
  52                 regulator-name = "eth_vio";
  53                 vin-supply = <&sw2_reg>;
  54         };
  55
  56         /* OE pin of the latch is low active */
  57         reg_latch_oe_on: regulator-latch-oe-on {
  58                 compatible = "regulator-fixed";
  59                 gpio = <&gpio3 22 0>;
  60                 regulator-always-on;
  61                 regulator-name = "latch_oe_on";
  62         };
  63
  64         reg_usb_h1_vbus: regulator-usb-h1-vbus {
  65                 compatible = "regulator-fixed";
  66                 enable-active-high;
  67                 gpio = <&gpio3 31 0>;
  68                 regulator-min-microvolt = <5000000>;
  69                 regulator-max-microvolt = <5000000>;
  70                 regulator-name = "usb_h1_vbus";
  71         };
  72
  73         reg_usb_otg_vbus: regulator-usb-otg-vbus {
  74                 compatible = "regulator-fixed";
  75                 regulator-min-microvolt = <5000000>;
  76                 regulator-max-microvolt = <5000000>;
  77                 regulator-name = "usb_otg_vbus";
  78         };
  79 };
  80
  81 &can1 {
  82         pinctrl-0 = <&pinctrl_flexcan1>;
  83         pinctrl-names = "default";
  84         status = "okay";
  85 };
  86
  87 /*
  88  * Special SoM hardware required which uses the pins from micro SD card. The
  89  * pins SD3_DAT0 and SD3_DAT1 are muxed as can2 Tx and Rx. The signals for can2
  90  * Tx and Rx are routed to the DHCOM UART1 rts/cts pins. So to enable can2 on
  91  * the board device tree file, the micro SD card must be disabled and the uart1
  92  * rts/cts must be disabled or output on other DHCOM pins.
  93  */
  94 &can2 {
  95         pinctrl-0 = <&pinctrl_flexcan2>;
  96         pinctrl-names = "default";
  97         status = "disabled";
  98 };
  99
 100 &ecspi1 {
 101         cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio4 11 GPIO_ACTIVE_LOW>;
 102         pinctrl-0 = <&pinctrl_ecspi1>;
 103         pinctrl-names = "default";
 104         status = "okay";
 105
 106         flash@0 { /* S25FL116K */
 107                 #address-cells = <1>;
 108                 #size-cells = <1>;
 109                 compatible = "jedec,spi-nor";
 110                 m25p,fast-read;
 111                 reg = <0>;
 112                 spi-max-frequency = <50000000>;
 113         };
 114 };
 115
 116 &ecspi2 {
 117         cs-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>;
 118         pinctrl-0 = <&pinctrl_ecspi2>;
 119         pinctrl-names = "default";
 120         status = "disabled";
 121 };
 122
 123 &fec {
 124         phy-mode = "rmii";
 125         phy-handle = <&ethphy0>;
 126         pinctrl-0 = <&pinctrl_enet_100M>;
 127         pinctrl-names = "default";
 128         status = "okay";
 129
 130         mdio {
 131                 #address-cells = <1>;
 132                 #size-cells = <0>;
 133
 134                 ethphy0: ethernet-phy@0 { /* SMSC LAN8710Ai */
 135                         compatible = "ethernet-phy-id0007.c0f0",
 136                                      "ethernet-phy-ieee802.3-c22";
 137                         interrupt-parent = <&gpio4>;
 138                         interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
 139                         pinctrl-0 = <&pinctrl_ethphy0>;
 140                         pinctrl-names = "default";
 141                         reg = <0>;
 142                         reset-assert-us = <500>;
 143                         reset-deassert-us = <500>;
 144                         reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
 145                         smsc,disable-energy-detect; /* Make plugin detection reliable */
 146                 };
 147         };
 148 };
 149
 150 &gpio1 {
 151         gpio-line-names =
 152                 "", "", "DHCOM-A", "", "DHCOM-B", "DHCOM-C", "", "",
 153                 "", "", "", "", "", "", "", "",
 154                 "DHCOM-R", "DHCOM-S", "DHCOM-Q", "DHCOM-T", "DHCOM-U", "", "", "",
 155                 "", "", "", "", "", "", "", "";
 156 };
 157
 158 &gpio2 {
 159         gpio-line-names =
 160                 "", "", "", "", "", "", "", "",
 161                 "", "", "", "", "", "", "", "",
 162                 "SOM-HW2", "", "", "SOM-HW0", "", "SOM-MEM1", "SOM-MEM0", "",
 163                 "", "", "", "", "", "", "", "";
 164 };
 165
 166 &gpio3 {
 167         gpio-line-names =
 168                 "", "", "", "", "", "", "", "",
 169                 "", "", "", "", "", "", "", "",
 170                 "", "", "", "", "", "", "", "",
 171                 "", "", "", "DHCOM-G", "", "", "", "";
 172 };
 173
 174 &gpio4 {
 175         gpio-line-names =
 176                 "", "", "", "", "", "DHCOM-E", "DHCOM-INT", "DHCOM-H",
 177                 "DHCOM-I", "DHCOM-L", "", "", "", "", "", "",
 178                 "", "", "", "", "DHCOM-F", "", "", "",
 179                 "", "", "", "", "", "", "", "";
 180 };
 181
 182 &gpio5 {
 183         gpio-line-names =
 184                 "", "", "", "", "", "", "", "",
 185                 "", "", "", "", "", "", "", "",
 186                 "", "", "DHCOM-V", "DHCOM-W", "", "DHCOM-O", "", "",
 187                 "", "", "", "", "", "", "", "";
 188 };
 189
 190 &gpio6 {
 191         gpio-line-names =
 192                 "", "", "", "DHCOM-D", "", "", "SOM-HW1", "",
 193                 "", "", "", "", "", "", "DHCOM-J", "DHCOM-K",
 194                 "", "", "", "", "", "", "", "",
 195                 "", "", "", "", "", "", "", "";
 196 };
 197
 198 &gpio7 {
 199         gpio-line-names =
 200                 "DHCOM-M", "DHCOM-N", "", "", "", "", "", "",
 201                 "", "", "", "", "", "DHCOM-P", "", "",
 202                 "", "", "", "", "", "", "", "",
 203                 "", "", "", "", "", "", "", "";
 204 };
 205
 206 &i2c1 {
 207         /*
 208          * Info: According to erratum ERR007805 clock frequency limit is 375000.
 209          * The erratum for i.MX6S/DL is here [1] and for i.MX6Q/D is here [2].
 210          * [1] https://www.nxp.com/docs/en/errata/IMX6SDLCE.pdf
 211          * [2] https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf
 212          */
 213         clock-frequency = <100000>;
 214         pinctrl-0 = <&pinctrl_i2c1>;
 215         pinctrl-1 = <&pinctrl_i2c1_gpio>;
 216         pinctrl-names = "default", "gpio";
 217         scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 218         sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 219         status = "okay";
 220 };
 221
 222 &i2c2 {
 223         /* Info: Clock frequency limit is 375000 (for details see i2c1) */
 224         clock-frequency = <100000>;
 225         pinctrl-0 = <&pinctrl_i2c2>;
 226         pinctrl-1 = <&pinctrl_i2c2_gpio>;
 227         pinctrl-names = "default", "gpio";
 228         scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 229         sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 230         status = "okay";
 231 };
 232
 233 &i2c3 {
 234         /* Info: Clock frequency limit is 375000 (for details see i2c1) */
 235         clock-frequency = <100000>;
 236         pinctrl-0 = <&pinctrl_i2c3>;
 237         pinctrl-1 = <&pinctrl_i2c3_gpio>;
 238         pinctrl-names = "default", "gpio";
 239         scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 240         sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 241         status = "okay";
 242
 243         ltc3676: pmic@3c {
 244                 compatible = "lltc,ltc3676";
 245                 interrupt-parent = <&gpio5>;
 246                 interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
 247                 pinctrl-0 = <&pinctrl_pmic>;
 248                 pinctrl-names = "default";
 249                 reg = <0x3c>;
 250
 251                 regulators {
 252                         sw1_reg: sw1 {
 253                                 lltc,fb-voltage-divider = <100000 110000>;
 254                                 regulator-always-on;
 255                                 regulator-boot-on;
 256                                 regulator-max-microvolt = <1527272>;
 257                                 regulator-min-microvolt = <787500>;
 258                                 regulator-ramp-delay = <7000>;
 259                                 regulator-suspend-mem-microvolt = <1040000>;
 260                         };
 261
 262                         sw2_reg: sw2 {
 263                                 lltc,fb-voltage-divider = <100000 28000>;
 264                                 regulator-always-on;
 265                                 regulator-boot-on;
 266                                 regulator-max-microvolt = <3657142>;
 267                                 regulator-min-microvolt = <1885714>;
 268                                 regulator-ramp-delay = <7000>;
 269                         };
 270
 271                         sw3_reg: sw3 {
 272                                 lltc,fb-voltage-divider = <100000 110000>;
 273                                 regulator-always-on;
 274                                 regulator-boot-on;
 275                                 regulator-max-microvolt = <1527272>;
 276                                 regulator-min-microvolt = <787500>;
 277                                 regulator-ramp-delay = <7000>;
 278                                 regulator-suspend-mem-microvolt = <980000>;
 279                         };
 280
 281                         sw4_reg: sw4 {
 282                                 lltc,fb-voltage-divider = <100000 93100>;
 283                                 regulator-always-on;
 284                                 regulator-boot-on;
 285                                 regulator-max-microvolt = <1659291>;
 286                                 regulator-min-microvolt = <855571>;
 287                                 regulator-ramp-delay = <7000>;
 288                         };
 289
 290                         ldo1_reg: ldo1 {
 291                                 lltc,fb-voltage-divider = <102000 29400>;
 292                                 regulator-always-on;
 293                                 regulator-boot-on;
 294                                 regulator-max-microvolt = <3240306>;
 295                                 regulator-min-microvolt = <3240306>;
 296                         };
 297
 298                         ldo2_reg: ldo2 {
 299                                 lltc,fb-voltage-divider = <100000 41200>;
 300                                 regulator-always-on;
 301                                 regulator-boot-on;
 302                                 regulator-max-microvolt = <2484708>;
 303                                 regulator-min-microvolt = <2484708>;
 304                         };
 305                 };
 306         };
 307
 308         touchscreen@49 { /* TSC2004 */
 309                 compatible = "ti,tsc2004";
 310                 interrupts-extended = <&gpio4 14 IRQ_TYPE_EDGE_FALLING>;
 311                 pinctrl-0 = <&pinctrl_tsc2004>;
 312                 pinctrl-names = "default";
 313                 reg = <0x49>;
 314                 vio-supply = <&reg_3p3v>;
 315                 status = "disabled";
 316         };
 317
 318         eeprom@50 {
 319                 compatible = "atmel,24c02";
 320                 pagesize = <16>;
 321                 reg = <0x50>;
 322         };
 323
 324         rtc_i2c: rtc@56 {
 325                 compatible = "microcrystal,rv3029";
 326                 interrupt-parent = <&gpio7>;
 327                 interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
 328                 pinctrl-0 = <&pinctrl_rtc>;
 329                 pinctrl-names = "default";
 330                 reg = <0x56>;
 331         };
 332 };
 333
 334 &pcie {
 335         pinctrl-0 = <&pinctrl_pcie>;
 336         pinctrl-names = "default";
 337 };
 338
 339 &pwm1 {
 340         pinctrl-0 = <&pinctrl_pwm1>;
 341         pinctrl-names = "default";
 342 };
 343
 344 &reg_arm {
 345         vin-supply = <&sw3_reg>;
 346 };
 347
 348 &reg_pu {
 349         vin-supply = <&sw1_reg>;
 350 };
 351
 352 &reg_soc {
 353         vin-supply = <&sw1_reg>;
 354 };
 355
 356 &reg_vdd1p1 {
 357         vin-supply = <&sw2_reg>;
 358 };
 359
 360 &reg_vdd2p5 {
 361         vin-supply = <&sw2_reg>;
 362 };
 363
 364 &uart1 { /* DHCOM UART1 */
 365         dcd-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
 366         dsr-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
 367         dtr-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
 368         rng-gpios = <&gpio2 31 GPIO_ACTIVE_LOW>;
 369         pinctrl-0 = <&pinctrl_uart1>;
 370         pinctrl-names = "default";
 371         uart-has-rtscts;
 372         status = "okay";
 373 };
 374
 375 &uart4 { /* DHCOM UART3 */
 376         pinctrl-0 = <&pinctrl_uart4>;
 377         pinctrl-names = "default";
 378         status = "okay";
 379 };
 380
 381 &uart5 { /* DHCOM UART2 */
 382         pinctrl-0 = <&pinctrl_uart5>;
 383         pinctrl-names = "default";
 384         uart-has-rtscts;
 385         status = "okay";
 386 };
 387
 388 &usbh1 {
 389         dr_mode = "host";
 390         pinctrl-0 = <&pinctrl_usbh1>;
 391         pinctrl-names = "default";
 392         vbus-supply = <&reg_usb_h1_vbus>;
 393         status = "okay";
 394 };
 395
 396 &usbotg {
 397         disable-over-current;
 398         dr_mode = "otg";
 399         pinctrl-0 = <&pinctrl_usbotg>;
 400         pinctrl-names = "default";
 401         vbus-supply = <&reg_usb_otg_vbus>;
 402         status = "okay";
 403 };
 404
 405 &usdhc2 { /* External SD card via DHCOM */
 406         cd-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;
 407         keep-power-in-suspend;
 408         pinctrl-0 = <&pinctrl_usdhc2>;
 409         pinctrl-names = "default";
 410         status = "disabled";
 411 };
 412
 413 &usdhc3 { /* Micro SD card on module */
 414         cd-gpios = <&gpio7 8 GPIO_ACTIVE_LOW>;
 415         fsl,wp-controller;
 416         keep-power-in-suspend;
 417         pinctrl-0 = <&pinctrl_usdhc3>;
 418         pinctrl-names = "default";
 419         status = "okay";
 420 };
 421
 422 &usdhc4 { /* eMMC on module */
 423         bus-width = <8>;
 424         keep-power-in-suspend;
 425         no-1-8-v;
 426         non-removable;
 427         pinctrl-0 = <&pinctrl_usdhc4>;
 428         pinctrl-names = "default";
 429         status = "okay";
 430 };
 431
 432 &weim {
 433         #address-cells = <2>;
 434         #size-cells = <1>;
 435         fsl,weim-cs-gpr = <&gpr>;
 436         pinctrl-0 = <&pinctrl_weim &pinctrl_weim_cs0 &pinctrl_weim_cs1>;
 437         pinctrl-names = "default";
 438         /* It is necessary to setup 2x 64MB otherwise setting gpr fails */
 439         ranges = <0 0 0x08000000 0x04000000>, /* CS0 */
 440                  <1 0 0x0c000000 0x04000000>; /* CS1 */
 441         status = "disabled";
 442 };
 443
 444 &iomuxc {
 445         pinctrl-0 = <
 446                         &pinctrl_hog_base
 447                         &pinctrl_dhcom_a &pinctrl_dhcom_b &pinctrl_dhcom_c
 448                         &pinctrl_dhcom_d &pinctrl_dhcom_e &pinctrl_dhcom_f
 449                         &pinctrl_dhcom_g &pinctrl_dhcom_h &pinctrl_dhcom_i
 450                         &pinctrl_dhcom_j &pinctrl_dhcom_k &pinctrl_dhcom_l
 451                         &pinctrl_dhcom_m &pinctrl_dhcom_n &pinctrl_dhcom_o
 452                         &pinctrl_dhcom_p &pinctrl_dhcom_q &pinctrl_dhcom_r
 453                         &pinctrl_dhcom_s &pinctrl_dhcom_t &pinctrl_dhcom_u
 454                         &pinctrl_dhcom_v &pinctrl_dhcom_w &pinctrl_dhcom_int
 455                 >;
 456         pinctrl-names = "default";
 457
 458         pinctrl_hog_base: hog-base-grp {
 459                 fsl,pins = <
 460                         /* GPIOs for memory coding */
 461                         MX6QDL_PAD_EIM_A16__GPIO2_IO22          0x120b0
 462                         MX6QDL_PAD_EIM_A17__GPIO2_IO21          0x120b0
 463                         /* GPIOs for hardware coding */
 464                         MX6QDL_PAD_EIM_A19__GPIO2_IO19          0x120b0
 465                         MX6QDL_PAD_EIM_A22__GPIO2_IO16          0x120b0
 466                         MX6QDL_PAD_EIM_A23__GPIO6_IO06          0x120b0
 467                 >;
 468         };
 469
 470         /* DHCOM GPIOs */
 471         pinctrl_dhcom_a: dhcom-a-grp {
 472                 fsl,pins = <MX6QDL_PAD_GPIO_2__GPIO1_IO02       0x400120b0>;
 473         };
 474
 475         pinctrl_dhcom_b: dhcom-b-grp {
 476                 fsl,pins = <MX6QDL_PAD_GPIO_4__GPIO1_IO04       0x400120b0>;
 477         };
 478
 479         pinctrl_dhcom_c: dhcom-c-grp {
 480                 fsl,pins = <MX6QDL_PAD_GPIO_5__GPIO1_IO05       0x400120b0>;
 481         };
 482
 483         pinctrl_dhcom_d: dhcom-d-grp {
 484                 fsl,pins = <MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03   0x400120b0>;
 485         };
 486
 487         pinctrl_dhcom_e: dhcom-e-grp {
 488                 fsl,pins = <MX6QDL_PAD_GPIO_19__GPIO4_IO05      0x400120b0>;
 489         };
 490
 491         pinctrl_dhcom_f: dhcom-f-grp {
 492                 fsl,pins = <MX6QDL_PAD_DI0_PIN4__GPIO4_IO20     0x400120b0>;
 493         };
 494
 495         pinctrl_dhcom_g: dhcom-g-grp {
 496                 fsl,pins = <MX6QDL_PAD_EIM_D27__GPIO3_IO27      0x400120b0>;
 497         };
 498
 499         pinctrl_dhcom_h: dhcom-h-grp {
 500                 fsl,pins = <MX6QDL_PAD_KEY_ROW0__GPIO4_IO07     0x400120b0>;
 501         };
 502
 503         pinctrl_dhcom_i: dhcom-i-grp {
 504                 fsl,pins = <MX6QDL_PAD_KEY_COL1__GPIO4_IO08     0x400120b0>;
 505         };
 506
 507         pinctrl_dhcom_j: dhcom-j-grp {
 508                 fsl,pins = <MX6QDL_PAD_NANDF_CS1__GPIO6_IO14    0x400120b0>;
 509         };
 510
 511         pinctrl_dhcom_k: dhcom-k-grp {
 512                 fsl,pins = <MX6QDL_PAD_NANDF_CS2__GPIO6_IO15    0x400120b0>;
 513         };
 514
 515         pinctrl_dhcom_l: dhcom-l-grp {
 516                 fsl,pins = <MX6QDL_PAD_KEY_ROW1__GPIO4_IO09     0x400120b0>;
 517         };
 518
 519         pinctrl_dhcom_m: dhcom-m-grp {
 520                 fsl,pins = <MX6QDL_PAD_SD3_DAT5__GPIO7_IO00     0x400120b0>;
 521         };
 522
 523         pinctrl_dhcom_n: dhcom-n-grp {
 524                 fsl,pins = <MX6QDL_PAD_SD3_DAT4__GPIO7_IO01     0x400120b0>;
 525         };
 526
 527         pinctrl_dhcom_o: dhcom-o-grp {
 528                 fsl,pins = <MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21   0x400120b0>;
 529         };
 530
 531         pinctrl_dhcom_p: dhcom-p-grp {
 532                 fsl,pins = <MX6QDL_PAD_GPIO_18__GPIO7_IO13      0x400120b0>;
 533         };
 534
 535         pinctrl_dhcom_q: dhcom-q-grp {
 536                 fsl,pins = <MX6QDL_PAD_SD1_CMD__GPIO1_IO18      0x400120b0>;
 537         };
 538
 539         pinctrl_dhcom_r: dhcom-r-grp {
 540                 fsl,pins = <MX6QDL_PAD_SD1_DAT0__GPIO1_IO16     0x400120b0>;
 541         };
 542
 543         pinctrl_dhcom_s: dhcom-s-grp {
 544                 fsl,pins = <MX6QDL_PAD_SD1_DAT1__GPIO1_IO17     0x400120b0>;
 545         };
 546
 547         pinctrl_dhcom_t: dhcom-t-grp {
 548                 fsl,pins = <MX6QDL_PAD_SD1_DAT2__GPIO1_IO19     0x400120b0>;
 549         };
 550
 551         pinctrl_dhcom_u: dhcom-u-grp {
 552                 fsl,pins = <MX6QDL_PAD_SD1_CLK__GPIO1_IO20      0x400120b0>;
 553         };
 554
 555         pinctrl_dhcom_v: dhcom-v-grp {
 556                 fsl,pins = <MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18  0x400120b0>;
 557         };
 558
 559         pinctrl_dhcom_w: dhcom-w-grp {
 560                 fsl,pins = <MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19    0x400120b0>;
 561         };
 562
 563         pinctrl_dhcom_int: dhcom-int-grp {
 564                 fsl,pins = <MX6QDL_PAD_KEY_COL0__GPIO4_IO06     0x400120b0>;
 565         };
 566
 567         pinctrl_ecspi1: ecspi1-grp {
 568                 fsl,pins = <
 569                         MX6QDL_PAD_EIM_D16__ECSPI1_SCLK         0x100b1
 570                         MX6QDL_PAD_EIM_D17__ECSPI1_MISO         0x100b1
 571                         MX6QDL_PAD_EIM_D18__ECSPI1_MOSI         0x100b1
 572                         MX6QDL_PAD_EIM_EB2__GPIO2_IO30          0x1b0b0
 573                         MX6QDL_PAD_KEY_ROW2__GPIO4_IO11         0x1b0b0
 574                 >;
 575         };
 576
 577         pinctrl_ecspi2: ecspi2-grp {
 578                 fsl,pins = <
 579                         MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK       0x100b1
 580                         MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI       0x100b1
 581                         MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO      0x100b1
 582                         MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29       0x1b0b0
 583                 >;
 584         };
 585
 586         pinctrl_enet_100M: enet-100M-grp {
 587                 fsl,pins = <
 588                         MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN      0x1b0b0
 589                         MX6QDL_PAD_ENET_MDC__ENET_MDC           0x1b0b0
 590                         MX6QDL_PAD_ENET_MDIO__ENET_MDIO         0x1b0b0
 591                         MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER       0x1b0b0
 592                         MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0     0x1b0b0
 593                         MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1     0x1b0b0
 594                         MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN       0x1b0b0
 595                         MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0     0x1b0b0
 596                         MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1     0x1b0b0
 597                         MX6QDL_PAD_GPIO_16__ENET_REF_CLK        0x4001b0a8
 598                 >;
 599         };
 600
 601         pinctrl_enet_vio: enet-vio-grp {
 602                 fsl,pins = <
 603                         MX6QDL_PAD_GPIO_7__GPIO1_IO07           0x120b0
 604                 >;
 605         };
 606
 607         pinctrl_ethphy0: ethphy0-grp {
 608                 fsl,pins = <
 609                         MX6QDL_PAD_EIM_WAIT__GPIO5_IO00         0xb0 /* Reset */
 610                         MX6QDL_PAD_KEY_ROW4__GPIO4_IO15         0xb1 /* Int */
 611                 >;
 612         };
 613
 614         pinctrl_flexcan1: flexcan1-grp {
 615                 fsl,pins = <
 616                         MX6QDL_PAD_GPIO_8__FLEXCAN1_RX          0x1b0b0
 617                         MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX        0x1b0b0
 618                 >;
 619         };
 620
 621         pinctrl_flexcan2: flexcan2-grp {
 622                 fsl,pins = <
 623                         MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX        0x1b0b0
 624                         MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX        0x1b0b0
 625                 >;
 626         };
 627
 628         pinctrl_i2c1: i2c1-grp {
 629                 fsl,pins = <
 630                         MX6QDL_PAD_EIM_D21__I2C1_SCL            0x4001b8b1
 631                         MX6QDL_PAD_EIM_D28__I2C1_SDA            0x4001b8b1
 632                 >;
 633         };
 634
 635         pinctrl_i2c1_gpio: i2c1-gpio-grp {
 636                 fsl,pins = <
 637                         MX6QDL_PAD_EIM_D21__GPIO3_IO21          0x4001b8b1
 638                         MX6QDL_PAD_EIM_D28__GPIO3_IO28          0x4001b8b1
 639                 >;
 640         };
 641
 642         pinctrl_i2c2: i2c2-grp {
 643                 fsl,pins = <
 644                         MX6QDL_PAD_KEY_COL3__I2C2_SCL           0x4001b8b1
 645                         MX6QDL_PAD_KEY_ROW3__I2C2_SDA           0x4001b8b1
 646                 >;
 647         };
 648
 649         pinctrl_i2c2_gpio: i2c2-gpio-grp {
 650                 fsl,pins = <
 651                         MX6QDL_PAD_KEY_COL3__GPIO4_IO12         0x4001b8b1
 652                         MX6QDL_PAD_KEY_ROW3__GPIO4_IO13         0x4001b8b1
 653                 >;
 654         };
 655
 656         pinctrl_i2c3: i2c3-grp {
 657                 fsl,pins = <
 658                         MX6QDL_PAD_GPIO_3__I2C3_SCL             0x4001b8b1
 659                         MX6QDL_PAD_GPIO_6__I2C3_SDA             0x4001b8b1
 660                 >;
 661         };
 662
 663         pinctrl_i2c3_gpio: i2c3-gpio-grp {
 664                 fsl,pins = <
 665                         MX6QDL_PAD_GPIO_3__GPIO1_IO03           0x4001b8b1
 666                         MX6QDL_PAD_GPIO_6__GPIO1_IO06           0x4001b8b1
 667                 >;
 668         };
 669
 670         pinctrl_pcie: pcie-grp {
 671                 fsl,pins = <
 672                         MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20     0x1b0b1 /* Wake */
 673                 >;
 674         };
 675
 676         pinctrl_pmic: pmic-grp {
 677                 fsl,pins = <
 678                         MX6QDL_PAD_EIM_A25__GPIO5_IO02          0x1b0b0
 679                 >;
 680         };
 681
 682         pinctrl_pwm1: pwm1-grp {
 683                 fsl,pins = <
 684                         MX6QDL_PAD_SD1_DAT3__PWM1_OUT           0x1b0b1
 685                 >;
 686         };
 687
 688         pinctrl_rtc: rtc-grp {
 689                 fsl,pins = <
 690                         MX6QDL_PAD_GPIO_17__GPIO7_IO12          0x120b0
 691                 >;
 692         };
 693
 694         pinctrl_tsc2004: tsc2004-grp {
 695                 fsl,pins = <
 696                         MX6QDL_PAD_KEY_COL4__GPIO4_IO14         0x120b0
 697                 >;
 698         };
 699
 700         pinctrl_uart1: uart1-grp {
 701                 fsl,pins = <
 702                         MX6QDL_PAD_EIM_D19__UART1_CTS_B         0x4001b0b1
 703                         MX6QDL_PAD_EIM_D20__UART1_RTS_B         0x1b0b1
 704                         MX6QDL_PAD_EIM_D23__GPIO3_IO23          0x4001b0b1
 705                         MX6QDL_PAD_EIM_D24__GPIO3_IO24          0x4001b0b1
 706                         MX6QDL_PAD_EIM_D25__GPIO3_IO25          0x4001b0b1
 707                         MX6QDL_PAD_EIM_EB3__GPIO2_IO31          0x4001b0b1
 708                         MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA      0x1b0b1
 709                         MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA      0x1b0b1
 710                 >;
 711         };
 712
 713         pinctrl_uart4: uart4-grp {
 714                 fsl,pins = <
 715                         MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA    0x1b0b1
 716                         MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA    0x1b0b1
 717                 >;
 718         };
 719
 720         pinctrl_uart5: uart5-grp {
 721                 fsl,pins = <
 722                         MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA    0x1b0b1
 723                         MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA    0x1b0b1
 724                         MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B      0x1b0b1
 725                         MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B      0x4001b0b1
 726                 >;
 727         };
 728
 729         pinctrl_usbh1: usbh1-grp {
 730                 fsl,pins = <
 731                         MX6QDL_PAD_EIM_D31__GPIO3_IO31          0x120b0
 732                         MX6QDL_PAD_EIM_D30__USB_H1_OC           0x1b0b1
 733                 >;
 734         };
 735
 736         pinctrl_usbotg: usbotg-grp {
 737                 fsl,pins = <
 738                         MX6QDL_PAD_GPIO_1__USB_OTG_ID           0x17059
 739                 >;
 740         };
 741
 742         pinctrl_usdhc2: usdhc2-grp {
 743                 fsl,pins = <
 744                         MX6QDL_PAD_NANDF_CS3__GPIO6_IO16        0x120b0
 745                         MX6QDL_PAD_SD2_CLK__SD2_CLK             0x10059
 746                         MX6QDL_PAD_SD2_CMD__SD2_CMD             0x17059
 747                         MX6QDL_PAD_SD2_DAT0__SD2_DATA0          0x17059
 748                         MX6QDL_PAD_SD2_DAT1__SD2_DATA1          0x17059
 749                         MX6QDL_PAD_SD2_DAT2__SD2_DATA2          0x17059
 750                         MX6QDL_PAD_SD2_DAT3__SD2_DATA3          0x17059
 751                 >;
 752         };
 753
 754         pinctrl_usdhc3: usdhc3-grp {
 755                 fsl,pins = <
 756                         MX6QDL_PAD_SD3_CLK__SD3_CLK             0x10059
 757                         MX6QDL_PAD_SD3_CMD__SD3_CMD             0x17059
 758                         MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x17059
 759                         MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x17059
 760                         MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x17059
 761                         MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x17059
 762                         MX6QDL_PAD_SD3_RST__GPIO7_IO08          0x120b0
 763                 >;
 764         };
 765
 766         pinctrl_usdhc4: usdhc4-grp {
 767                 fsl,pins = <
 768                         MX6QDL_PAD_SD4_CLK__SD4_CLK             0x10059
 769                         MX6QDL_PAD_SD4_CMD__SD4_CMD             0x17059
 770                         MX6QDL_PAD_SD4_DAT0__SD4_DATA0          0x17059
 771                         MX6QDL_PAD_SD4_DAT1__SD4_DATA1          0x17059
 772                         MX6QDL_PAD_SD4_DAT2__SD4_DATA2          0x17059
 773                         MX6QDL_PAD_SD4_DAT3__SD4_DATA3          0x17059
 774                         MX6QDL_PAD_SD4_DAT4__SD4_DATA4          0x17059
 775                         MX6QDL_PAD_SD4_DAT5__SD4_DATA5          0x17059
 776                         MX6QDL_PAD_SD4_DAT6__SD4_DATA6          0x17059
 777                         MX6QDL_PAD_SD4_DAT7__SD4_DATA7          0x17059
 778                 >;
 779         };
 780
 781         pinctrl_weim: weim-grp {
 782                 fsl,pins = <
 783                         MX6QDL_PAD_EIM_DA0__EIM_AD00            0xb0a6
 784                         MX6QDL_PAD_EIM_DA1__EIM_AD01            0xb0a6
 785                         MX6QDL_PAD_EIM_DA2__EIM_AD02            0xb0a6
 786                         MX6QDL_PAD_EIM_DA3__EIM_AD03            0xb0a6
 787                         MX6QDL_PAD_EIM_DA4__EIM_AD04            0xb0a6
 788                         MX6QDL_PAD_EIM_DA5__EIM_AD05            0xb0a6
 789                         MX6QDL_PAD_EIM_DA6__EIM_AD06            0xb0a6
 790                         MX6QDL_PAD_EIM_DA7__EIM_AD07            0xb0a6
 791                         MX6QDL_PAD_EIM_DA8__EIM_AD08            0xb0a6
 792                         MX6QDL_PAD_EIM_DA9__EIM_AD09            0xb0a6
 793                         MX6QDL_PAD_EIM_DA10__EIM_AD10           0xb0a6
 794                         MX6QDL_PAD_EIM_DA11__EIM_AD11           0xb0a6
 795                         MX6QDL_PAD_EIM_DA12__EIM_AD12           0xb0a6
 796                         MX6QDL_PAD_EIM_DA13__EIM_AD13           0xb0a6
 797                         MX6QDL_PAD_EIM_DA14__EIM_AD14           0xb0a6
 798                         MX6QDL_PAD_EIM_DA15__EIM_AD15           0xb0a6
 799                         MX6QDL_PAD_EIM_D22__GPIO3_IO22          0x130b0
 800                         MX6QDL_PAD_EIM_LBA__EIM_LBA_B           0xb060 /* LE */
 801                         MX6QDL_PAD_EIM_OE__EIM_OE_B             0xb0a6
 802                         MX6QDL_PAD_EIM_RW__EIM_RW               0xb0a6 /* WE */
 803                 >;
 804         };
 805
 806         pinctrl_weim_cs0: weim-cs0-grp {
 807                 fsl,pins = <
 808                         MX6QDL_PAD_EIM_CS0__EIM_CS0_B           0xb0b1
 809                 >;
 810         };
 811
 812         pinctrl_weim_cs1: weim-cs1-grp {
 813                 fsl,pins = <
 814                         MX6QDL_PAD_EIM_CS1__EIM_CS1_B           0xb0b1
 815                 >;
 816         };
 817 };