2 * Copyright 2013 CompuLab Ltd.
3 * Copyright 2016 Christopher Spinrath
5 * Based on the devicetree distributed with the vendor kernel for the
7 * Copyright 2013 CompuLab Ltd.
8 * Author: Valentin Raevsky <valentin@compulab.co.il>
10 * This file is dual-licensed: you can use it either under the terms
11 * of the GPL or the X11 license, at your option. Note that this dual
12 * licensing only applies to this file, and not this project as a
15 * a) This file is free software; you can redistribute it and/or
16 * modify it under the terms of the GNU General Public License as
17 * published by the Free Software Foundation; either version 2 of the
18 * License, or (at your option) any later version.
20 * This file is distributed in the hope that it will be useful,
21 * but WITHOUT ANY WARRANTY; without even the implied warranty of
22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
23 * GNU General Public License for more details.
27 * b) Permission is hereby granted, free of charge, to any person
28 * obtaining a copy of this software and associated documentation
29 * files (the "Software"), to deal in the Software without
30 * restriction, including without limitation the rights to use,
31 * copy, modify, merge, publish, distribute, sublicense, and/or
32 * sell copies of the Software, and to permit persons to whom the
33 * Software is furnished to do so, subject to the following
36 * The above copyright notice and this permission notice shall be
37 * included in all copies or substantial portions of the Software.
39 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
40 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
41 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
42 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
43 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
44 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
45 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
46 * OTHER DEALINGS IN THE SOFTWARE.
49 #include <dt-bindings/input/input.h>
50 #include "imx6q-cm-fx6.dts"
53 model = "CompuLab Utilite Pro";
54 compatible = "compulab,utilite-pro", "compulab,cm-fx6", "fsl,imx6q";
63 compatible = "gpio-keys";
64 pinctrl-names = "default";
65 pinctrl-0 = <&pinctrl_gpio_keys>;
68 label = "Power Button";
69 gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
70 linux,code = <KEY_POWER>;
77 ddc-i2c-bus = <&i2c2>;
82 pinctrl-names = "default";
83 pinctrl-0 = <&pinctrl_i2c1>;
87 compatible = "at24,24c02";
93 compatible = "emmicro,em3027";
99 pinctrl-names = "default";
100 pinctrl-0 = <&pinctrl_i2c2>;
105 pinctrl_gpio_keys: gpio_keysgrp {
107 MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0
111 pinctrl_i2c1: i2c1grp {
113 MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
114 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
118 pinctrl_i2c2: i2c2grp {
120 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
121 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
125 pinctrl_uart2: uart2grp {
127 MX6QDL_PAD_GPIO_7__UART2_TX_DATA 0x1b0b1
128 MX6QDL_PAD_GPIO_8__UART2_RX_DATA 0x1b0b1
129 MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b1
130 MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b1
134 pinctrl_usdhc3: usdhc3grp {
136 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
137 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
138 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
139 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
140 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
141 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
145 pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
147 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170B9
148 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100B9
149 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170B9
150 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170B9
151 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170B9
152 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170B9
156 pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
158 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170F9
159 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100F9
160 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170F9
161 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170F9
162 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170F9
163 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170F9
170 reg = <0x000000 0 0 0 0>;
171 #address-cells = <3>;
174 /* non-removable i211 ethernet card */
175 eth1: intel,i211@pcie0,0 {
176 reg = <0x010000 0 0 0 0>;
182 pinctrl-names = "default";
183 pinctrl-0 = <&pinctrl_uart2>;
189 pinctrl-names = "default", "state_100mhz", "state_200mhz";
190 pinctrl-0 = <&pinctrl_usdhc3>;
191 pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
192 pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
195 keep-power-in-suspend;