arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts

   1 /*
   2  * Copyright 2013 Data Modul AG
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 /dts-v1/;
  13
  14 #include <dt-bindings/gpio/gpio.h>
  15 #include "imx6q.dtsi"
  16
  17 / {
  18         model = "Data Modul eDM-QMX6 Board";
  19         compatible = "dmo,imx6q-edmqmx6", "fsl,imx6q";
  20
  21         chosen {
  22                 stdout-path = &uart2;
  23         };
  24
  25         aliases {
  26                 gpio7 = &stmpe_gpio1;
  27                 gpio8 = &stmpe_gpio2;
  28                 stmpe-i2c0 = &stmpe1;
  29                 stmpe-i2c1 = &stmpe2;
  30         };
  31
  32         memory@10000000 {
  33                 reg = <0x10000000 0x80000000>;
  34         };
  35
  36         regulators {
  37                 compatible = "simple-bus";
  38                 #address-cells = <1>;
  39                 #size-cells = <0>;
  40
  41                 reg_3p3v: regulator@0 {
  42                         compatible = "regulator-fixed";
  43                         reg = <0>;
  44                         regulator-name = "3P3V";
  45                         regulator-min-microvolt = <3300000>;
  46                         regulator-max-microvolt = <3300000>;
  47                         regulator-always-on;
  48                 };
  49
  50                 reg_usb_otg_switch: regulator@1 {
  51                         compatible = "regulator-fixed";
  52                         reg = <1>;
  53                         regulator-name = "usb_otg_switch";
  54                         regulator-min-microvolt = <5000000>;
  55                         regulator-max-microvolt = <5000000>;
  56                         gpio = <&gpio7 12 0>;
  57                         regulator-boot-on;
  58                         regulator-always-on;
  59                 };
  60
  61                 reg_usb_host1: regulator@2 {
  62                         compatible = "regulator-fixed";
  63                         reg = <2>;
  64                         regulator-name = "usb_host1_en";
  65                         regulator-min-microvolt = <3300000>;
  66                         regulator-max-microvolt = <3300000>;
  67                         gpio = <&gpio3 31 0>;
  68                         enable-active-high;
  69                 };
  70         };
  71
  72         gpio-leds {
  73                 compatible = "gpio-leds";
  74
  75                 led-blue {
  76                         label = "blue";
  77                         gpios = <&stmpe_gpio1 8 GPIO_ACTIVE_HIGH>;
  78                         linux,default-trigger = "heartbeat";
  79                 };
  80
  81                 led-green {
  82                         label = "green";
  83                         gpios = <&stmpe_gpio1 9 GPIO_ACTIVE_HIGH>;
  84                 };
  85
  86                 led-pink {
  87                         label = "pink";
  88                         gpios = <&stmpe_gpio1 10 GPIO_ACTIVE_HIGH>;
  89                 };
  90
  91                 led-red {
  92                         label = "red";
  93                         gpios = <&stmpe_gpio1 11 GPIO_ACTIVE_HIGH>;
  94                 };
  95         };
  96 };
  97
  98 &can1 {
  99         pinctrl-names = "default";
 100         pinctrl-0 = <&pinctrl_can1>;
 101         status = "okay";
 102 };
 103
 104 &ecspi5 {
 105         pinctrl-names = "default";
 106         pinctrl-0 = <&pinctrl_ecspi5>;
 107         cs-gpios = <&gpio1 12 0>;
 108         status = "okay";
 109
 110         flash: m25p80@0 {
 111                 compatible = "m25p80", "jedec,spi-nor";
 112                 spi-max-frequency = <40000000>;
 113                 reg = <0>;
 114         };
 115 };
 116
 117 &fec {
 118         pinctrl-names = "default";
 119         pinctrl-0 = <&pinctrl_enet>;
 120         phy-mode = "rgmii";
 121         phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
 122         phy-supply = <&vgen2_1v2_eth>;
 123         status = "okay";
 124 };
 125
 126 &i2c1 {
 127         clock-frequency = <100000>;
 128         pinctrl-names = "default";
 129         pinctrl-0 = <&pinctrl_i2c1>;
 130         status = "okay";
 131 };
 132
 133 &i2c2 {
 134         clock-frequency = <100000>;
 135         pinctrl-names = "default";
 136         pinctrl-0 = <&pinctrl_i2c2
 137                      &pinctrl_stmpe1
 138                      &pinctrl_stmpe2
 139                      &pinctrl_pfuze>;
 140         status = "okay";
 141
 142         pmic: pfuze100@8 {
 143                 compatible = "fsl,pfuze100";
 144                 reg = <0x08>;
 145                 interrupt-parent = <&gpio3>;
 146                 interrupts = <20 8>;
 147
 148                 regulators {
 149                         sw1a_reg: sw1ab {
 150                                 regulator-min-microvolt = <300000>;
 151                                 regulator-max-microvolt = <1875000>;
 152                                 regulator-boot-on;
 153                                 regulator-always-on;
 154                         };
 155
 156                         sw1c_reg: sw1c {
 157                                 regulator-min-microvolt = <300000>;
 158                                 regulator-max-microvolt = <1875000>;
 159                                 regulator-boot-on;
 160                                 regulator-always-on;
 161                         };
 162
 163                         sw2_reg: sw2 {
 164                                 regulator-min-microvolt = <800000>;
 165                                 regulator-max-microvolt = <3300000>;
 166                                 regulator-boot-on;
 167                                 regulator-always-on;
 168                         };
 169
 170                         sw3a_reg: sw3a {
 171                                 regulator-min-microvolt = <400000>;
 172                                 regulator-max-microvolt = <1975000>;
 173                                 regulator-boot-on;
 174                                 regulator-always-on;
 175                         };
 176
 177                         sw3b_reg: sw3b {
 178                                 regulator-min-microvolt = <400000>;
 179                                 regulator-max-microvolt = <1975000>;
 180                                 regulator-boot-on;
 181                                 regulator-always-on;
 182                         };
 183
 184                         sw4_reg: sw4 {
 185                                 regulator-min-microvolt = <400000>;
 186                                 regulator-max-microvolt = <1975000>;
 187                                 regulator-always-on;
 188                         };
 189
 190                         swbst_reg: swbst {
 191                                 regulator-min-microvolt = <5000000>;
 192                                 regulator-max-microvolt = <5150000>;
 193                                 regulator-always-on;
 194                         };
 195
 196                         snvs_reg: vsnvs {
 197                                 regulator-min-microvolt = <1000000>;
 198                                 regulator-max-microvolt = <3000000>;
 199                                 regulator-boot-on;
 200                                 regulator-always-on;
 201                         };
 202
 203                         vref_reg: vrefddr {
 204                                 regulator-boot-on;
 205                                 regulator-always-on;
 206                         };
 207
 208                         vgen1_reg: vgen1 {
 209                                 regulator-min-microvolt = <800000>;
 210                                 regulator-max-microvolt = <1550000>;
 211                         };
 212
 213                         vgen2_1v2_eth: vgen2 {
 214                                 regulator-min-microvolt = <800000>;
 215                                 regulator-max-microvolt = <1550000>;
 216                         };
 217
 218                         vdd_high_in: vgen3 {
 219                                 regulator-min-microvolt = <1800000>;
 220                                 regulator-max-microvolt = <3300000>;
 221                                 regulator-boot-on;
 222                                 regulator-always-on;
 223                         };
 224
 225                         vgen4_reg: vgen4 {
 226                                 regulator-min-microvolt = <1800000>;
 227                                 regulator-max-microvolt = <3300000>;
 228                                 regulator-always-on;
 229                         };
 230
 231                         vgen5_reg: vgen5 {
 232                                 regulator-min-microvolt = <1800000>;
 233                                 regulator-max-microvolt = <3300000>;
 234                                 regulator-always-on;
 235                         };
 236
 237                         vgen6_reg: vgen6 {
 238                                 regulator-min-microvolt = <1800000>;
 239                                 regulator-max-microvolt = <3300000>;
 240                                 regulator-always-on;
 241                         };
 242                 };
 243         };
 244
 245         stmpe1: stmpe1601@40 {
 246                 compatible = "st,stmpe1601";
 247                 reg = <0x40>;
 248                 interrupts = <30 0>;
 249                 interrupt-parent = <&gpio3>;
 250                 vcc-supply = <&sw2_reg>;
 251                 vio-supply = <&sw2_reg>;
 252
 253                 stmpe_gpio1: stmpe_gpio {
 254                         #gpio-cells = <2>;
 255                         compatible = "st,stmpe-gpio";
 256                 };
 257         };
 258
 259         stmpe2: stmpe1601@44 {
 260                 compatible = "st,stmpe1601";
 261                 reg = <0x44>;
 262                 interrupts = <2 0>;
 263                 interrupt-parent = <&gpio5>;
 264                 vcc-supply = <&sw2_reg>;
 265                 vio-supply = <&sw2_reg>;
 266
 267                 stmpe_gpio2: stmpe_gpio {
 268                         #gpio-cells = <2>;
 269                         compatible = "st,stmpe-gpio";
 270                 };
 271         };
 272
 273         temp1: ad7414@4c {
 274                 compatible = "ad,ad7414";
 275                 reg = <0x4c>;
 276         };
 277
 278         temp2: ad7414@4d {
 279                 compatible = "ad,ad7414";
 280                 reg = <0x4d>;
 281         };
 282
 283         rtc: m41t62@68 {
 284                 compatible = "st,m41t62";
 285                 reg = <0x68>;
 286         };
 287 };
 288
 289 &i2c3 {
 290         clock-frequency = <100000>;
 291         pinctrl-names = "default";
 292         pinctrl-0 = <&pinctrl_i2c3>;
 293         status = "okay";
 294 };
 295
 296 &iomuxc {
 297         pinctrl-names = "default";
 298         pinctrl-0 = <&pinctrl_hog>;
 299
 300         imx6q-dmo-edmqmx6 {
 301                 pinctrl_hog: hoggrp {
 302                         fsl,pins = <
 303                                 MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x80000000
 304                                 MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x80000000
 305                         >;
 306                 };
 307
 308                 pinctrl_can1: can1grp {
 309                         fsl,pins = <
 310                                 MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX        0x1b0b0
 311                                 MX6QDL_PAD_GPIO_7__FLEXCAN1_TX          0x1b0b0
 312                         >;
 313                 };
 314
 315                 pinctrl_ecspi5: ecspi5rp-1 {
 316                         fsl,pins = <
 317                                 MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO        0x80000000
 318                                 MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI         0x80000000
 319                                 MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK         0x80000000
 320                                 MX6QDL_PAD_SD2_DAT3__GPIO1_IO12         0x80000000
 321                         >;
 322                 };
 323
 324                 pinctrl_enet: enetgrp {
 325                         fsl,pins = <
 326                                 MX6QDL_PAD_RGMII_RXC__RGMII_RXC         0x1b030
 327                                 MX6QDL_PAD_RGMII_RD0__RGMII_RD0         0x1b030
 328                                 MX6QDL_PAD_RGMII_RD1__RGMII_RD1         0x1b030
 329                                 MX6QDL_PAD_RGMII_RD2__RGMII_RD2         0x1b030
 330                                 MX6QDL_PAD_RGMII_RD3__RGMII_RD3         0x1b030
 331                                 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL   0x1b030
 332                                 MX6QDL_PAD_RGMII_TXC__RGMII_TXC         0x1b030
 333                                 MX6QDL_PAD_RGMII_TD0__RGMII_TD0         0x1b030
 334                                 MX6QDL_PAD_RGMII_TD1__RGMII_TD1         0x1b030
 335                                 MX6QDL_PAD_RGMII_TD2__RGMII_TD2         0x1b030
 336                                 MX6QDL_PAD_RGMII_TD3__RGMII_TD3         0x1b030
 337                                 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL   0x1b030
 338                                 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK    0x1b0b0
 339                                 MX6QDL_PAD_ENET_MDIO__ENET_MDIO         0x1b0b0
 340                                 MX6QDL_PAD_ENET_MDC__ENET_MDC           0x1b0b0
 341                                 MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25      0x1b0b0
 342                                 MX6QDL_PAD_GPIO_16__ENET_REF_CLK        0x4001b0a8
 343                         >;
 344                 };
 345
 346                 pinctrl_i2c1: i2c1grp {
 347                         fsl,pins = <
 348                                 MX6QDL_PAD_EIM_D21__I2C1_SCL            0x4001b8b1
 349                                 MX6QDL_PAD_EIM_D28__I2C1_SDA            0x4001b8b1
 350                         >;
 351                 };
 352
 353                 pinctrl_i2c2: i2c2grp {
 354                         fsl,pins = <
 355                                 MX6QDL_PAD_EIM_EB2__I2C2_SCL            0x4001b8b1
 356                                 MX6QDL_PAD_KEY_ROW3__I2C2_SDA           0x4001b8b1
 357                         >;
 358                 };
 359
 360                 pinctrl_i2c3: i2c3grp {
 361                         fsl,pins = <
 362                                 MX6QDL_PAD_EIM_D17__I2C3_SCL            0x4001b8b1
 363                                 MX6QDL_PAD_GPIO_6__I2C3_SDA             0x4001b8b1
 364                         >;
 365                 };
 366
 367                 pinctrl_pcie: pciegrp {
 368                         fsl,pins = <
 369                                 MX6QDL_PAD_KEY_COL1__GPIO4_IO08         0x100b1
 370                         >;
 371                 };
 372
 373                 pinctrl_pfuze: pfuze100grp1 {
 374                         fsl,pins = <
 375                                 MX6QDL_PAD_EIM_D20__GPIO3_IO20          0x80000000
 376                         >;
 377                 };
 378
 379                 pinctrl_stmpe1: stmpe1grp {
 380                         fsl,pins = <MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x80000000>;
 381                 };
 382
 383                 pinctrl_stmpe2: stmpe2grp {
 384                         fsl,pins = <MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x80000000>;
 385                 };
 386
 387                 pinctrl_uart1: uart1grp {
 388                         fsl,pins = <
 389                                 MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA      0x1b0b1
 390                                 MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA      0x1b0b1
 391                         >;
 392                 };
 393
 394                 pinctrl_uart2: uart2grp {
 395                         fsl,pins = <
 396                                 MX6QDL_PAD_EIM_D26__UART2_TX_DATA       0x1b0b1
 397                                 MX6QDL_PAD_EIM_D27__UART2_RX_DATA       0x1b0b1
 398                         >;
 399                 };
 400
 401                 pinctrl_usbotg: usbotggrp {
 402                         fsl,pins = <
 403                                 MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID       0x17059
 404                         >;
 405                 };
 406
 407                 pinctrl_usdhc3: usdhc3grp {
 408                         fsl,pins = <
 409                                 MX6QDL_PAD_SD3_CMD__SD3_CMD             0x17059
 410                                 MX6QDL_PAD_SD3_CLK__SD3_CLK             0x10059
 411                                 MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x17059
 412                                 MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x17059
 413                                 MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x17059
 414                                 MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x17059
 415                         >;
 416                 };
 417
 418                 pinctrl_usdhc4: usdhc4grp {
 419                         fsl,pins = <
 420                                 MX6QDL_PAD_SD4_CMD__SD4_CMD             0x17059
 421                                 MX6QDL_PAD_SD4_CLK__SD4_CLK             0x10059
 422                                 MX6QDL_PAD_SD4_DAT0__SD4_DATA0          0x17059
 423                                 MX6QDL_PAD_SD4_DAT1__SD4_DATA1          0x17059
 424                                 MX6QDL_PAD_SD4_DAT2__SD4_DATA2          0x17059
 425                                 MX6QDL_PAD_SD4_DAT3__SD4_DATA3          0x17059
 426                                 MX6QDL_PAD_SD4_DAT4__SD4_DATA4          0x17059
 427                                 MX6QDL_PAD_SD4_DAT5__SD4_DATA5          0x17059
 428                                 MX6QDL_PAD_SD4_DAT6__SD4_DATA6          0x17059
 429                                 MX6QDL_PAD_SD4_DAT7__SD4_DATA7          0x17059
 430                         >;
 431                 };
 432         };
 433 };
 434
 435 &pcie {
 436         pinctrl-names = "default";
 437         pinctrl-0 = <&pinctrl_pcie>;
 438         reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>;
 439         status = "okay";
 440 };
 441
 442 &sata {
 443         status = "okay";
 444 };
 445
 446 &uart1 {
 447         pinctrl-names = "default";
 448         pinctrl-0 = <&pinctrl_uart1>;
 449         status = "okay";
 450 };
 451
 452 &uart2 {
 453         pinctrl-names = "default";
 454         pinctrl-0 = <&pinctrl_uart2>;
 455         status = "okay";
 456 };
 457
 458 &usbh1 {
 459         vbus-supply = <&reg_usb_host1>;
 460         disable-over-current;
 461         dr_mode = "host";
 462         status = "okay";
 463 };
 464
 465 &usbotg {
 466         pinctrl-names = "default";
 467         pinctrl-0 = <&pinctrl_usbotg>;
 468         disable-over-current;
 469         status = "okay";
 470 };
 471
 472 &usdhc3 {
 473         pinctrl-names = "default";
 474         pinctrl-0 = <&pinctrl_usdhc3>;
 475         vmmc-supply = <&reg_3p3v>;
 476         status = "okay";
 477 };
 478
 479 &usdhc4 {
 480         pinctrl-names = "default";
 481         pinctrl-0 = <&pinctrl_usdhc4>;
 482         vmmc-supply = <&reg_3p3v>;
 483         non-removable;
 484         bus-width = <8>;
 485         status = "okay";
 486 };