1 // SPDX-License-Identifier: GPL-2.0+
3 // Copyright 2012 Freescale Semiconductor, Inc.
9 model = "Freescale i.MX28 Evaluation Kit";
10 compatible = "fsl,imx28-evk", "fsl,imx28";
13 reg = <0x40000000 0x08000000>;
17 reg_3p3v: regulator-3p3v {
18 compatible = "regulator-fixed";
19 regulator-name = "3P3V";
20 regulator-min-microvolt = <3300000>;
21 regulator-max-microvolt = <3300000>;
25 reg_vddio_sd0: regulator-vddio-sd0 {
26 compatible = "regulator-fixed";
27 regulator-name = "vddio-sd0";
28 regulator-min-microvolt = <3300000>;
29 regulator-max-microvolt = <3300000>;
33 reg_fec_3v3: regulator-fec-3v3 {
34 compatible = "regulator-fixed";
35 regulator-name = "fec-3v3";
36 regulator-min-microvolt = <3300000>;
37 regulator-max-microvolt = <3300000>;
41 reg_usb0_vbus: regulator-usb0-vbus {
42 compatible = "regulator-fixed";
43 regulator-name = "usb0_vbus";
44 regulator-min-microvolt = <5000000>;
45 regulator-max-microvolt = <5000000>;
50 reg_usb1_vbus: regulator-usb1-vbus {
51 compatible = "regulator-fixed";
52 regulator-name = "usb1_vbus";
53 regulator-min-microvolt = <5000000>;
54 regulator-max-microvolt = <5000000>;
59 reg_lcd_3v3: regulator-lcd-3v3 {
60 compatible = "regulator-fixed";
61 regulator-name = "lcd-3v3";
62 regulator-min-microvolt = <3300000>;
63 regulator-max-microvolt = <3300000>;
68 reg_can_3v3: regulator-can-3v3 {
69 compatible = "regulator-fixed";
70 regulator-name = "can-3v3";
71 regulator-min-microvolt = <3300000>;
72 regulator-max-microvolt = <3300000>;
77 reg_lcd_5v: regulator-lcd-5v {
78 compatible = "regulator-fixed";
79 regulator-name = "lcd-5v";
80 regulator-min-microvolt = <5000000>;
81 regulator-max-microvolt = <5000000>;
85 compatible = "sii,43wvf1g";
86 backlight = <&backlight_display>;
87 dvdd-supply = <®_lcd_3v3>;
88 avdd-supply = <®_lcd_5v>;
92 remote-endpoint = <&display_out>;
100 pinctrl-names = "default";
101 pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg
107 compatible = "fsl,imx28-mmc";
108 pinctrl-names = "default";
109 pinctrl-0 = <&mmc0_8bit_pins_a
110 &mmc0_cd_cfg &mmc0_sck_cfg>;
112 wp-gpios = <&gpio2 12 0>;
113 vmmc-supply = <®_vddio_sd0>;
118 compatible = "fsl,imx28-mmc";
120 wp-gpios = <&gpio0 28 0>;
124 #address-cells = <1>;
126 compatible = "fsl,imx28-spi";
127 pinctrl-names = "default";
128 pinctrl-0 = <&spi2_pins_a>;
132 #address-cells = <1>;
134 compatible = "sst,sst25vf016b", "jedec,spi-nor";
135 spi-max-frequency = <40000000>;
141 pinctrl-names = "default";
142 pinctrl-0 = <&hog_pins_a>;
147 MX28_PAD_SSP1_CMD__GPIO_2_13
148 MX28_PAD_SSP1_DATA3__GPIO_2_15
149 MX28_PAD_ENET0_RX_CLK__GPIO_4_13
150 MX28_PAD_SSP1_SCK__GPIO_2_12
151 MX28_PAD_PWM3__GPIO_3_28
152 MX28_PAD_LCD_RESET__GPIO_3_30
153 MX28_PAD_AUART2_RX__GPIO_3_8
154 MX28_PAD_AUART2_TX__GPIO_3_9
156 fsl,drive-strength = <MXS_DRIVE_4mA>;
157 fsl,voltage = <MXS_VOLTAGE_HIGH>;
158 fsl,pull-up = <MXS_PULL_DISABLE>;
161 led_pin_gpio3_5: led_gpio3_5@0 {
164 MX28_PAD_AUART1_TX__GPIO_3_5
166 fsl,drive-strength = <MXS_DRIVE_4mA>;
167 fsl,voltage = <MXS_VOLTAGE_HIGH>;
168 fsl,pull-up = <MXS_PULL_DISABLE>;
171 gpmi_pins_evk: gpmi-nand-evk@0 {
174 MX28_PAD_GPMI_CE1N__GPMI_CE1N
175 MX28_PAD_GPMI_RDY1__GPMI_READY1
177 fsl,drive-strength = <MXS_DRIVE_4mA>;
178 fsl,voltage = <MXS_VOLTAGE_HIGH>;
179 fsl,pull-up = <MXS_PULL_DISABLE>;
182 lcdif_pins_evk: lcdif-evk@0 {
185 MX28_PAD_LCD_RD_E__LCD_VSYNC
186 MX28_PAD_LCD_WR_RWN__LCD_HSYNC
187 MX28_PAD_LCD_RS__LCD_DOTCLK
188 MX28_PAD_LCD_CS__LCD_ENABLE
190 fsl,drive-strength = <MXS_DRIVE_4mA>;
191 fsl,voltage = <MXS_VOLTAGE_HIGH>;
192 fsl,pull-up = <MXS_PULL_DISABLE>;
197 pinctrl-names = "default";
198 pinctrl-0 = <&lcdif_24bit_pins_a
203 display_out: endpoint {
204 remote-endpoint = <&panel_in>;
210 pinctrl-names = "default";
211 pinctrl-0 = <&can0_pins_a>;
212 xceiver-supply = <®_can_3v3>;
217 pinctrl-names = "default";
218 pinctrl-0 = <&can1_pins_a>;
219 xceiver-supply = <®_can_3v3>;
225 saif0: saif@80042000 {
226 pinctrl-names = "default";
227 pinctrl-0 = <&saif0_pins_a>;
231 saif1: saif@80046000 {
232 pinctrl-names = "default";
233 pinctrl-0 = <&saif1_pins_a>;
234 fsl,saif-master = <&saif0>;
240 fsl,lradc-touchscreen-wires = <4>;
247 pinctrl-names = "default";
248 pinctrl-0 = <&i2c0_pins_a>;
252 compatible = "fsl,sgtl5000";
254 #sound-dai-cells = <0>;
255 VDDA-supply = <®_3p3v>;
256 VDDIO-supply = <®_3p3v>;
261 compatible = "atmel,24c32";
268 pinctrl-names = "default";
269 pinctrl-0 = <&pwm2_pins_a>;
273 duart: serial@80074000 {
274 pinctrl-names = "default";
275 pinctrl-0 = <&duart_pins_a>;
279 auart0: serial@8006a000 {
280 pinctrl-names = "default";
281 pinctrl-0 = <&auart0_pins_a>;
286 auart3: serial@80070000 {
287 pinctrl-names = "default";
288 pinctrl-0 = <&auart3_pins_a>;
292 usbphy0: usbphy@8007c000 {
296 usbphy1: usbphy@8007e000 {
304 pinctrl-names = "default";
305 pinctrl-0 = <&usb0_id_pins_a>;
306 vbus-supply = <®_usb0_vbus>;
311 vbus-supply = <®_usb1_vbus>;
315 mac0: ethernet@800f0000 {
317 pinctrl-names = "default";
318 pinctrl-0 = <&mac0_pins_a>;
319 phy-supply = <®_fec_3v3>;
320 phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
321 phy-reset-duration = <100>;
325 mac1: ethernet@800f4000 {
327 pinctrl-names = "default";
328 pinctrl-0 = <&mac1_pins_a>;
334 compatible = "fsl,imx28-evk-sgtl5000",
335 "fsl,mxs-audio-sgtl5000";
336 model = "imx28-evk-sgtl5000";
337 saif-controllers = <&saif0 &saif1>;
338 audio-codec = <&sgtl5000>;
342 compatible = "gpio-leds";
343 pinctrl-names = "default";
344 pinctrl-0 = <&led_pin_gpio3_5>;
348 gpios = <&gpio3 5 0>;
349 linux,default-trigger = "heartbeat";
353 backlight_display: backlight {
354 compatible = "pwm-backlight";
355 pwms = <&pwm 2 5000000>;
356 brightness-levels = <0 4 8 16 32 64 128 255>;
357 default-brightness-level = <6>;