arch/arm/boot/dts/dm814x.dtsi

   1 /*
   2  * This file is licensed under the terms of the GNU General Public License
   3  * version 2.  This program is licensed "as is" without any warranty of any
   4  * kind, whether express or implied.
   5  */
   6
   7 #include <dt-bindings/bus/ti-sysc.h>
   8 #include <dt-bindings/clock/dm814.h>
   9 #include <dt-bindings/gpio/gpio.h>
  10 #include <dt-bindings/pinctrl/dm814x.h>
  11
  12 / {
  13         compatible = "ti,dm814";
  14         interrupt-parent = <&intc>;
  15         #address-cells = <1>;
  16         #size-cells = <1>;
  17         chosen { };
  18
  19         aliases {
  20                 i2c0 = &i2c1;
  21                 i2c1 = &i2c2;
  22                 serial0 = &uart1;
  23                 serial1 = &uart2;
  24                 serial2 = &uart3;
  25                 ethernet0 = &cpsw_emac0;
  26                 ethernet1 = &cpsw_emac1;
  27                 usb0 = &usb0;
  28                 usb1 = &usb1;
  29                 phy0 = &usb0_phy;
  30                 phy1 = &usb1_phy;
  31         };
  32
  33         cpus {
  34                 #address-cells = <1>;
  35                 #size-cells = <0>;
  36                 cpu@0 {
  37                         compatible = "arm,cortex-a8";
  38                         device_type = "cpu";
  39                         reg = <0>;
  40                 };
  41         };
  42
  43         pmu {
  44                 compatible = "arm,cortex-a8-pmu";
  45                 interrupts = <3>;
  46         };
  47
  48         /*
  49          * The soc node represents the soc top level view. It is used for IPs
  50          * that are not memory mapped in the MPU view or for the MPU itself.
  51          */
  52         soc {
  53                 compatible = "ti,omap-infra";
  54                 mpu {
  55                         compatible = "ti,omap3-mpu";
  56                         ti,hwmods = "mpu";
  57                 };
  58         };
  59
  60         ocp {
  61                 compatible = "simple-bus";
  62                 #address-cells = <1>;
  63                 #size-cells = <1>;
  64                 ranges;
  65                 ti,hwmods = "l3_main";
  66
  67                 usb: usb@47400000 {
  68                         compatible = "ti,am33xx-usb";
  69                         reg = <0x47400000 0x1000>;
  70                         ranges;
  71                         #address-cells = <1>;
  72                         #size-cells = <1>;
  73                         ti,hwmods = "usb_otg_hs";
  74
  75                         usb0_phy: usb-phy@47401300 {
  76                                 compatible = "ti,am335x-usb-phy";
  77                                 reg = <0x47401300 0x100>;
  78                                 reg-names = "phy";
  79                                 ti,ctrl_mod = <&usb_ctrl_mod>;
  80                                 #phy-cells = <0>;
  81                         };
  82
  83                         usb0: usb@47401000 {
  84                                 compatible = "ti,musb-am33xx";
  85                                 reg = <0x47401400 0x400
  86                                        0x47401000 0x200>;
  87                                 reg-names = "mc", "control";
  88
  89                                 interrupts = <18>;
  90                                 interrupt-names = "mc";
  91                                 dr_mode = "otg";
  92                                 mentor,multipoint = <1>;
  93                                 mentor,num-eps = <16>;
  94                                 mentor,ram-bits = <12>;
  95                                 mentor,power = <500>;
  96                                 phys = <&usb0_phy>;
  97
  98                                 dmas = <&cppi41dma  0 0 &cppi41dma  1 0
  99                                         &cppi41dma  2 0 &cppi41dma  3 0
 100                                         &cppi41dma  4 0 &cppi41dma  5 0
 101                                         &cppi41dma  6 0 &cppi41dma  7 0
 102                                         &cppi41dma  8 0 &cppi41dma  9 0
 103                                         &cppi41dma 10 0 &cppi41dma 11 0
 104                                         &cppi41dma 12 0 &cppi41dma 13 0
 105                                         &cppi41dma 14 0 &cppi41dma  0 1
 106                                         &cppi41dma  1 1 &cppi41dma  2 1
 107                                         &cppi41dma  3 1 &cppi41dma  4 1
 108                                         &cppi41dma  5 1 &cppi41dma  6 1
 109                                         &cppi41dma  7 1 &cppi41dma  8 1
 110                                         &cppi41dma  9 1 &cppi41dma 10 1
 111                                         &cppi41dma 11 1 &cppi41dma 12 1
 112                                         &cppi41dma 13 1 &cppi41dma 14 1>;
 113                                 dma-names =
 114                                         "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
 115                                         "rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
 116                                         "rx14", "rx15",
 117                                         "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
 118                                         "tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
 119                                         "tx14", "tx15";
 120                         };
 121
 122                         usb1: usb@47401800 {
 123                                 compatible = "ti,musb-am33xx";
 124                                 reg = <0x47401c00 0x400
 125                                         0x47401800 0x200>;
 126                                 reg-names = "mc", "control";
 127                                 interrupts = <19>;
 128                                 interrupt-names = "mc";
 129                                 dr_mode = "otg";
 130                                 mentor,multipoint = <1>;
 131                                 mentor,num-eps = <16>;
 132                                 mentor,ram-bits = <12>;
 133                                 mentor,power = <500>;
 134                                 phys = <&usb1_phy>;
 135
 136                                 dmas = <&cppi41dma 15 0 &cppi41dma 16 0
 137                                         &cppi41dma 17 0 &cppi41dma 18 0
 138                                         &cppi41dma 19 0 &cppi41dma 20 0
 139                                         &cppi41dma 21 0 &cppi41dma 22 0
 140                                         &cppi41dma 23 0 &cppi41dma 24 0
 141                                         &cppi41dma 25 0 &cppi41dma 26 0
 142                                         &cppi41dma 27 0 &cppi41dma 28 0
 143                                         &cppi41dma 29 0 &cppi41dma 15 1
 144                                         &cppi41dma 16 1 &cppi41dma 17 1
 145                                         &cppi41dma 18 1 &cppi41dma 19 1
 146                                         &cppi41dma 20 1 &cppi41dma 21 1
 147                                         &cppi41dma 22 1 &cppi41dma 23 1
 148                                         &cppi41dma 24 1 &cppi41dma 25 1
 149                                         &cppi41dma 26 1 &cppi41dma 27 1
 150                                         &cppi41dma 28 1 &cppi41dma 29 1>;
 151                                 dma-names =
 152                                         "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
 153                                         "rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
 154                                         "rx14", "rx15",
 155                                         "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
 156                                         "tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
 157                                         "tx14", "tx15";
 158                         };
 159
 160                         cppi41dma: dma-controller@47402000 {
 161                                 compatible = "ti,am3359-cppi41";
 162                                 reg =  <0x47400000 0x1000
 163                                         0x47402000 0x1000
 164                                         0x47403000 0x1000
 165                                         0x47404000 0x4000>;
 166                                 reg-names = "glue", "controller", "scheduler", "queuemgr";
 167                                 interrupts = <17>;
 168                                 interrupt-names = "glue";
 169                                 #dma-cells = <2>;
 170                                 /* For backwards compatibility: */
 171                                 #dma-channels = <30>;
 172                                 dma-channels = <30>;
 173                                 #dma-requests = <256>;
 174                                 dma-requests = <256>;
 175                         };
 176                 };
 177
 178                 /*
 179                  * See TRM "Table 1-317. L4LS Instance Summary" for hints.
 180                  * It shows the module target agent registers though, so the
 181                  * actual device is typically 0x1000 before the target agent
 182                  * except in cases where the module is larger than 0x1000.
 183                  */
 184                 l4ls: l4ls@48000000 {
 185                         compatible = "ti,dm814-l4ls", "simple-bus";
 186                         #address-cells = <1>;
 187                         #size-cells = <1>;
 188                         ranges = <0 0x48000000 0x2000000>;
 189
 190                         i2c1: i2c@28000 {
 191                                 compatible = "ti,omap4-i2c";
 192                                 #address-cells = <1>;
 193                                 #size-cells = <0>;
 194                                 ti,hwmods = "i2c1";
 195                                 reg = <0x28000 0x1000>;
 196                                 interrupts = <70>;
 197                         };
 198
 199                         elm: elm@80000 {
 200                                 compatible = "ti,814-elm";
 201                                 ti,hwmods = "elm";
 202                                 reg = <0x80000 0x2000>;
 203                                 interrupts = <4>;
 204                         };
 205
 206                         gpio1: gpio@32000 {
 207                                 compatible = "ti,omap4-gpio";
 208                                 ti,hwmods = "gpio1";
 209                                 ti,gpio-always-on;
 210                                 reg = <0x32000 0x2000>;
 211                                 interrupts = <96>;
 212                                 gpio-controller;
 213                                 #gpio-cells = <2>;
 214                                 interrupt-controller;
 215                                 #interrupt-cells = <2>;
 216                         };
 217
 218                         gpio2: gpio@4c000 {
 219                                 compatible = "ti,omap4-gpio";
 220                                 ti,hwmods = "gpio2";
 221                                 ti,gpio-always-on;
 222                                 reg = <0x4c000 0x2000>;
 223                                 interrupts = <98>;
 224                                 gpio-controller;
 225                                 #gpio-cells = <2>;
 226                                 interrupt-controller;
 227                                 #interrupt-cells = <2>;
 228                         };
 229
 230                         gpio3: gpio@1ac000 {
 231                                 compatible = "ti,omap4-gpio";
 232                                 ti,hwmods = "gpio3";
 233                                 ti,gpio-always-on;
 234                                 reg = <0x1ac000 0x2000>;
 235                                 interrupts = <32>;
 236                                 gpio-controller;
 237                                 #gpio-cells = <2>;
 238                                 interrupt-controller;
 239                                 #interrupt-cells = <2>;
 240                         };
 241
 242                         gpio4: gpio@1ae000 {
 243                                 compatible = "ti,omap4-gpio";
 244                                 ti,hwmods = "gpio4";
 245                                 ti,gpio-always-on;
 246                                 reg = <0x1ae000 0x2000>;
 247                                 interrupts = <62>;
 248                                 gpio-controller;
 249                                 #gpio-cells = <2>;
 250                                 interrupt-controller;
 251                                 #interrupt-cells = <2>;
 252                         };
 253
 254                         i2c2: i2c@2a000 {
 255                                 compatible = "ti,omap4-i2c";
 256                                 #address-cells = <1>;
 257                                 #size-cells = <0>;
 258                                 ti,hwmods = "i2c2";
 259                                 reg = <0x2a000 0x1000>;
 260                                 interrupts = <71>;
 261                         };
 262
 263                         mcspi1: spi@30000 {
 264                                 compatible = "ti,omap4-mcspi";
 265                                 reg = <0x30000 0x1000>;
 266                                 #address-cells = <1>;
 267                                 #size-cells = <0>;
 268                                 interrupts = <65>;
 269                                 ti,spi-num-cs = <4>;
 270                                 ti,hwmods = "mcspi1";
 271                                 dmas = <&edma 16 0 &edma 17 0
 272                                         &edma 18 0 &edma 19 0
 273                                         &edma 20 0 &edma 21 0
 274                                         &edma 22 0 &edma 23 0>;
 275
 276                                 dma-names = "tx0", "rx0", "tx1", "rx1",
 277                                         "tx2", "rx2", "tx3", "rx3";
 278                         };
 279
 280                         mcspi2: spi@1a0000 {
 281                                 compatible = "ti,omap4-mcspi";
 282                                 reg = <0x1a0000 0x1000>;
 283                                 #address-cells = <1>;
 284                                 #size-cells = <0>;
 285                                 interrupts = <125>;
 286                                 ti,spi-num-cs = <4>;
 287                                 ti,hwmods = "mcspi2";
 288                                 dmas = <&edma 42 0 &edma 43 0
 289                                         &edma 44 0 &edma 45 0>;
 290                                 dma-names = "tx0", "rx0", "tx1", "rx1";
 291                         };
 292
 293                         /* Board must configure dmas with edma_xbar for EDMA */
 294                         mcspi3: spi@1a2000 {
 295                                 compatible = "ti,omap4-mcspi";
 296                                 reg = <0x1a2000 0x1000>;
 297                                 #address-cells = <1>;
 298                                 #size-cells = <0>;
 299                                 interrupts = <126>;
 300                                 ti,spi-num-cs = <4>;
 301                                 ti,hwmods = "mcspi3";
 302                         };
 303
 304                         mcspi4: spi@1a4000 {
 305                                 compatible = "ti,omap4-mcspi";
 306                                 reg = <0x1a4000 0x1000>;
 307                                 #address-cells = <1>;
 308                                 #size-cells = <0>;
 309                                 interrupts = <127>;
 310                                 ti,spi-num-cs = <4>;
 311                                 ti,hwmods = "mcspi4";
 312                         };
 313
 314                         timer1_target: target-module@2e000 {
 315                                 compatible = "ti,sysc-omap4-timer", "ti,sysc";
 316                                 reg = <0x2e000 0x4>,
 317                                       <0x2e010 0x4>;
 318                                 reg-names = "rev", "sysc";
 319                                 ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
 320                                 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 321                                                 <SYSC_IDLE_NO>,
 322                                                 <SYSC_IDLE_SMART>,
 323                                                 <SYSC_IDLE_SMART_WKUP>;
 324                                 clocks = <&timer1_fck>;
 325                                 clock-names = "fck";
 326                                 #address-cells = <1>;
 327                                 #size-cells = <1>;
 328                                 ranges = <0x0 0x2e000 0x1000>;
 329
 330                                 timer1: timer@0 {
 331                                         compatible = "ti,am335x-timer-1ms";
 332                                         reg = <0x0 0x400>;
 333                                         interrupts = <67>;
 334                                         ti,timer-alwon;
 335                                         clocks = <&timer1_fck>;
 336                                         clock-names = "fck";
 337                                 };
 338                         };
 339
 340                         uart1: uart@20000 {
 341                                 compatible = "ti,am3352-uart", "ti,omap3-uart";
 342                                 ti,hwmods = "uart1";
 343                                 reg = <0x20000 0x2000>;
 344                                 clock-frequency = <48000000>;
 345                                 interrupts = <72>;
 346                                 dmas = <&edma 26 0 &edma 27 0>;
 347                                 dma-names = "tx", "rx";
 348                         };
 349
 350                         uart2: uart@22000 {
 351                                 compatible = "ti,am3352-uart", "ti,omap3-uart";
 352                                 ti,hwmods = "uart2";
 353                                 reg = <0x22000 0x2000>;
 354                                 clock-frequency = <48000000>;
 355                                 interrupts = <73>;
 356                                 dmas = <&edma 28 0 &edma 29 0>;
 357                                 dma-names = "tx", "rx";
 358                         };
 359
 360                         uart3: uart@24000 {
 361                                 compatible = "ti,am3352-uart", "ti,omap3-uart";
 362                                 ti,hwmods = "uart3";
 363                                 reg = <0x24000 0x2000>;
 364                                 clock-frequency = <48000000>;
 365                                 interrupts = <74>;
 366                                 dmas = <&edma 30 0 &edma 31 0>;
 367                                 dma-names = "tx", "rx";
 368                         };
 369
 370                         timer2_target: target-module@40000 {
 371                                 compatible = "ti,sysc-omap4-timer", "ti,sysc";
 372                                 reg = <0x40000 0x4>,
 373                                       <0x40010 0x4>;
 374                                 reg-names = "rev", "sysc";
 375                                 ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
 376                                 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 377                                                 <SYSC_IDLE_NO>,
 378                                                 <SYSC_IDLE_SMART>,
 379                                                 <SYSC_IDLE_SMART_WKUP>;
 380                                 clocks = <&timer2_fck>;
 381                                 clock-names = "fck";
 382                                 #address-cells = <1>;
 383                                 #size-cells = <1>;
 384                                 ranges = <0x0 0x40000 0x1000>;
 385
 386                                 timer2: timer@0 {
 387                                         compatible = "ti,dm814-timer";
 388                                         reg = <0 0x1000>;
 389                                         interrupts = <68>;
 390                                         clocks = <&timer2_fck>;
 391                                         clock-names = "fck";
 392                                 };
 393                         };
 394
 395                         timer3: timer@42000 {
 396                                 compatible = "ti,dm814-timer";
 397                                 reg = <0x42000 0x2000>;
 398                                 interrupts = <69>;
 399                                 ti,hwmods = "timer3";
 400                         };
 401
 402                         mmc1: mmc@60000 {
 403                                 compatible = "ti,omap4-hsmmc";
 404                                 ti,hwmods = "mmc1";
 405                                 dmas = <&edma 24 0
 406                                         &edma 25 0>;
 407                                 dma-names = "tx", "rx";
 408                                 interrupts = <64>;
 409                                 interrupt-parent = <&intc>;
 410                                 reg = <0x60000 0x1000>;
 411                         };
 412
 413                         rtc: rtc@c0000 {
 414                                 compatible = "ti,am3352-rtc", "ti,da830-rtc";
 415                                 reg = <0xc0000 0x1000>;
 416                                 interrupts = <75 76>;
 417                                 ti,hwmods = "rtc";
 418                         };
 419
 420                         mmc2: mmc@1d8000 {
 421                                 compatible = "ti,omap4-hsmmc";
 422                                 ti,hwmods = "mmc2";
 423                                 dmas = <&edma 2 0
 424                                         &edma 3 0>;
 425                                 dma-names = "tx", "rx";
 426                                 interrupts = <28>;
 427                                 interrupt-parent = <&intc>;
 428                                 reg = <0x1d8000 0x1000>;
 429                         };
 430
 431                         control: control@140000 {
 432                                 compatible = "ti,dm814-scm", "simple-bus";
 433                                 reg = <0x140000 0x20000>;
 434                                 #address-cells = <1>;
 435                                 #size-cells = <1>;
 436                                 ranges = <0 0x140000 0x20000>;
 437
 438                                 scm_conf: scm_conf@0 {
 439                                         compatible = "syscon", "simple-bus";
 440                                         reg = <0x0 0x800>;
 441                                         #address-cells = <1>;
 442                                         #size-cells = <1>;
 443                                         ranges = <0 0 0x800>;
 444
 445                                         phy_gmii_sel: phy-gmii-sel {
 446                                                 compatible = "ti,dm814-phy-gmii-sel";
 447                                                 reg = <0x650 0x4>;
 448                                                 #phy-cells = <1>;
 449                                         };
 450
 451                                         scm_clocks: clocks {
 452                                                 #address-cells = <1>;
 453                                                 #size-cells = <0>;
 454                                         };
 455
 456                                         scm_clockdomains: clockdomains {
 457                                         };
 458                                 };
 459
 460                                 usb_ctrl_mod: control@620 {
 461                                         compatible = "ti,am335x-usb-ctrl-module";
 462                                         reg = <0x620 0x10
 463                                                 0x648 0x4>;
 464                                         reg-names = "phy_ctrl", "wakeup";
 465                                 };
 466
 467                                 edma_xbar: dma-router@f90 {
 468                                         compatible = "ti,am335x-edma-crossbar";
 469                                         reg = <0xf90 0x40>;
 470                                         #dma-cells = <3>;
 471                                         dma-requests = <32>;
 472                                         dma-masters = <&edma>;
 473                                 };
 474
 475                                 /*
 476                                  * Note that silicon revision 2.1 and older
 477                                  * require input enabled (bit 18 set) for all
 478                                  * 3.3V I/Os to avoid cumulative hardware damage.
 479                                  * For more info, see errata advisory 2.1.87.
 480                                  * We leave bit 18 out of function-mask and rely
 481                                  * on the bootloader for it.
 482                                  */
 483                                 pincntl: pinmux@800 {
 484                                         compatible = "pinctrl-single";
 485                                         reg = <0x800 0x438>;
 486                                         #address-cells = <1>;
 487                                         #size-cells = <0>;
 488                                         #pinctrl-cells = <1>;
 489                                         pinctrl-single,register-width = <32>;
 490                                         pinctrl-single,function-mask = <0x307ff>;
 491                                 };
 492
 493                                 usb1_phy: usb-phy@1b00 {
 494                                         compatible = "ti,am335x-usb-phy";
 495                                         reg = <0x1b00 0x100>;
 496                                         reg-names = "phy";
 497                                         ti,ctrl_mod = <&usb_ctrl_mod>;
 498                                         #phy-cells = <0>;
 499                                 };
 500                         };
 501
 502                         prcm: prcm@180000 {
 503                                 compatible = "ti,dm814-prcm", "simple-bus";
 504                                 reg = <0x180000 0x2000>;
 505                                 #address-cells = <1>;
 506                                 #size-cells = <1>;
 507                                 ranges = <0 0x180000 0x2000>;
 508
 509                                 prcm_clocks: clocks {
 510                                         #address-cells = <1>;
 511                                         #size-cells = <0>;
 512                                 };
 513
 514                                 prcm_clockdomains: clockdomains {
 515                                 };
 516                         };
 517
 518                         /* See TRM PLL_SUBSYS_BASE and "PLLSS Registers" */
 519                         pllss: pllss@1c5000 {
 520                                 compatible = "ti,dm814-pllss", "simple-bus";
 521                                 reg = <0x1c5000 0x1000>;
 522                                 #address-cells = <1>;
 523                                 #size-cells = <1>;
 524                                 ranges = <0 0x1c5000 0x1000>;
 525
 526                                 pllss_clocks: clocks {
 527                                         #address-cells = <1>;
 528                                         #size-cells = <0>;
 529                                 };
 530
 531                                 pllss_clockdomains: clockdomains {
 532                                 };
 533                         };
 534
 535                         wdt1: wdt@1c7000 {
 536                                 compatible = "ti,omap3-wdt";
 537                                 ti,hwmods = "wd_timer";
 538                                 reg = <0x1c7000 0x1000>;
 539                                 interrupts = <91>;
 540                         };
 541                 };
 542
 543                 intc: interrupt-controller@48200000 {
 544                         compatible = "ti,dm814-intc";
 545                         interrupt-controller;
 546                         #interrupt-cells = <1>;
 547                         reg = <0x48200000 0x1000>;
 548                 };
 549
 550                 /* Board must configure evtmux with edma_xbar for EDMA */
 551                 mmc3: mmc@47810000 {
 552                         compatible = "ti,omap4-hsmmc";
 553                         ti,hwmods = "mmc3";
 554                         interrupts = <29>;
 555                         interrupt-parent = <&intc>;
 556                         reg = <0x47810000 0x1000>;
 557                 };
 558
 559                 target-module@49000000 {
 560                         compatible = "ti,sysc-omap4", "ti,sysc";
 561                         reg = <0x49000000 0x4>;
 562                         reg-names = "rev";
 563                         clocks = <&alwon_clkctrl DM814_TPCC_CLKCTRL 0>;
 564                         clock-names = "fck";
 565                         #address-cells = <1>;
 566                         #size-cells = <1>;
 567                         ranges = <0x0 0x49000000 0x10000>;
 568
 569                         edma: dma@0 {
 570                                 compatible = "ti,edma3-tpcc";
 571                                 reg = <0 0x10000>;
 572                                 reg-names = "edma3_cc";
 573                                 interrupts = <12 13 14>;
 574                                 interrupt-names = "edma3_ccint", "edma3_mperr",
 575                                                   "edma3_ccerrint";
 576                                 dma-requests = <64>;
 577                                 #dma-cells = <2>;
 578
 579                                 ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
 580                                            <&edma_tptc2 3>, <&edma_tptc3 0>;
 581
 582                                 ti,edma-memcpy-channels = <20 21>;
 583                         };
 584                 };
 585
 586                 target-module@49800000 {
 587                         compatible = "ti,sysc-omap4", "ti,sysc";
 588                         reg = <0x49800000 0x4>,
 589                               <0x49800010 0x4>;
 590                         reg-names = "rev", "sysc";
 591                         ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
 592                         ti,sysc-midle = <SYSC_IDLE_FORCE>;
 593                         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 594                                         <SYSC_IDLE_SMART>;
 595                         clocks = <&alwon_clkctrl DM814_TPTC0_CLKCTRL 0>;
 596                         clock-names = "fck";
 597                         #address-cells = <1>;
 598                         #size-cells = <1>;
 599                         ranges = <0x0 0x49800000 0x100000>;
 600
 601                         edma_tptc0: dma@0 {
 602                                 compatible = "ti,edma3-tptc";
 603                                 reg = <0 0x100000>;
 604                                 interrupts = <112>;
 605                                 interrupt-names = "edma3_tcerrint";
 606                         };
 607                 };
 608
 609                 target-module@49900000 {
 610                         compatible = "ti,sysc-omap4", "ti,sysc";
 611                         reg = <0x49900000 0x4>,
 612                               <0x49900010 0x4>;
 613                         reg-names = "rev", "sysc";
 614                         ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
 615                         ti,sysc-midle = <SYSC_IDLE_FORCE>;
 616                         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 617                                         <SYSC_IDLE_SMART>;
 618                         clocks = <&alwon_clkctrl DM814_TPTC1_CLKCTRL 0>;
 619                         clock-names = "fck";
 620                         #address-cells = <1>;
 621                         #size-cells = <1>;
 622                         ranges = <0x0 0x49900000 0x100000>;
 623
 624                         edma_tptc1: dma@0 {
 625                                 compatible = "ti,edma3-tptc";
 626                                 reg = <0 0x100000>;
 627                                 interrupts = <113>;
 628                                 interrupt-names = "edma3_tcerrint";
 629                         };
 630                 };
 631
 632                 target-module@49a00000 {
 633                         compatible = "ti,sysc-omap4", "ti,sysc";
 634                         reg = <0x49a00000 0x4>,
 635                               <0x49a00010 0x4>;
 636                         reg-names = "rev", "sysc";
 637                         ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
 638                         ti,sysc-midle = <SYSC_IDLE_FORCE>;
 639                         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 640                                         <SYSC_IDLE_SMART>;
 641                         clocks = <&alwon_clkctrl DM814_TPTC2_CLKCTRL 0>;
 642                         clock-names = "fck";
 643                         #address-cells = <1>;
 644                         #size-cells = <1>;
 645                         ranges = <0x0 0x49a00000 0x100000>;
 646
 647                         edma_tptc2: dma@0 {
 648                                 compatible = "ti,edma3-tptc";
 649                                 reg = <0 0x100000>;
 650                                 interrupts = <114>;
 651                                 interrupt-names = "edma3_tcerrint";
 652                         };
 653                 };
 654
 655                 target-module@49b00000 {
 656                         compatible = "ti,sysc-omap4", "ti,sysc";
 657                         reg = <0x49b00000 0x4>,
 658                               <0x49b00010 0x4>;
 659                         reg-names = "rev", "sysc";
 660                         ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
 661                         ti,sysc-midle = <SYSC_IDLE_FORCE>;
 662                         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 663                                         <SYSC_IDLE_SMART>;
 664                         clocks = <&alwon_clkctrl DM814_TPTC3_CLKCTRL 0>;
 665                         clock-names = "fck";
 666                         #address-cells = <1>;
 667                         #size-cells = <1>;
 668                         ranges = <0x0 0x49b00000 0x100000>;
 669
 670                         edma_tptc3: dma@0 {
 671                                 compatible = "ti,edma3-tptc";
 672                                 reg = <0 0x100000>;
 673                                 interrupts = <115>;
 674                                 interrupt-names = "edma3_tcerrint";
 675                         };
 676                 };
 677
 678                 /* See TRM "Table 1-318. L4HS Instance Summary" */
 679                 l4hs: l4hs@4a000000 {
 680                         compatible = "ti,dm814-l4hs", "simple-bus";
 681                         #address-cells = <1>;
 682                         #size-cells = <1>;
 683                         ranges = <0 0x4a000000 0x1b4040>;
 684
 685                         target-module@100000 {
 686                                 compatible = "ti,sysc-omap4-simple", "ti,sysc";
 687                                 reg = <0x100900 0x4>,
 688                                       <0x100908 0x4>,
 689                                       <0x100904 0x4>;
 690                                 reg-names = "rev", "sysc", "syss";
 691                                 ti,sysc-mask = <0>;
 692                                 ti,sysc-midle = <SYSC_IDLE_FORCE>,
 693                                                 <SYSC_IDLE_NO>;
 694                                 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 695                                                 <SYSC_IDLE_NO>;
 696                                 ti,syss-mask = <1>;
 697                                 clocks = <&alwon_ethernet_clkctrl DM814_ETHERNET_CPGMAC0_CLKCTRL 0>;
 698                                 clock-names = "fck";
 699                                 #address-cells = <1>;
 700                                 #size-cells = <1>;
 701                                 ranges = <0 0x100000 0x8000>;
 702
 703                                 mac: ethernet@0 {
 704                                         compatible = "ti,cpsw";
 705                                         clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>;
 706                                         clock-names = "fck", "cpts";
 707                                         cpdma_channels = <8>;
 708                                         ale_entries = <1024>;
 709                                         bd_ram_size = <0x2000>;
 710                                         mac_control = <0x20>;
 711                                         slaves = <2>;
 712                                         active_slave = <0>;
 713                                         cpts_clock_mult = <0x80000000>;
 714                                         cpts_clock_shift = <29>;
 715                                         reg = <0 0x800>,
 716                                               <0x900 0x100>;
 717                                         #address-cells = <1>;
 718                                         #size-cells = <1>;
 719                                         /*
 720                                         * c0_rx_thresh_pend
 721                                         * c0_rx_pend
 722                                         * c0_tx_pend
 723                                         * c0_misc_pend
 724                                         */
 725                                         interrupts = <40 41 42 43>;
 726                                         ranges = <0 0 0x8000>;
 727                                         syscon = <&scm_conf>;
 728
 729                                         davinci_mdio: mdio@800 {
 730                                                 compatible = "ti,cpsw-mdio", "ti,davinci_mdio";
 731                                                 clocks = <&cpsw_125mhz_gclk>;
 732                                                 clock-names = "fck";
 733                                                 #address-cells = <1>;
 734                                                 #size-cells = <0>;
 735                                                 bus_freq = <1000000>;
 736                                                 reg = <0x800 0x100>;
 737                                         };
 738
 739                                         cpsw_emac0: slave@200 {
 740                                                 /* Filled in by U-Boot */
 741                                                 mac-address = [ 00 00 00 00 00 00 ];
 742                                                 phys = <&phy_gmii_sel 1>;
 743                                         };
 744
 745                                         cpsw_emac1: slave@300 {
 746                                                 /* Filled in by U-Boot */
 747                                                 mac-address = [ 00 00 00 00 00 00 ];
 748                                                 phys = <&phy_gmii_sel 2>;
 749                                         };
 750                                 };
 751                         };
 752                 };
 753
 754                 gpmc: gpmc@50000000 {
 755                         compatible = "ti,am3352-gpmc";
 756                         ti,hwmods = "gpmc";
 757                         ti,no-idle-on-init;
 758                         reg = <0x50000000 0x2000>;
 759                         interrupts = <100>;
 760                         gpmc,num-cs = <7>;
 761                         gpmc,num-waitpins = <2>;
 762                         #address-cells = <2>;
 763                         #size-cells = <1>;
 764                         interrupt-controller;
 765                         #interrupt-cells = <2>;
 766                         gpio-controller;
 767                         #gpio-cells = <2>;
 768                 };
 769         };
 770 };
 771
 772 #include "dm814x-clocks.dtsi"
 773
 774 /* Preferred always-on timer for clocksource */
 775 &timer1_target {
 776         ti,no-reset-on-init;
 777         ti,no-idle;
 778         timer@0 {
 779                 assigned-clocks = <&timer1_fck>;
 780                 assigned-clock-parents = <&devosc_ck>;
 781         };
 782 };
 783
 784 /* Preferred timer for clockevent */
 785 &timer2_target {
 786         ti,no-reset-on-init;
 787         ti,no-idle;
 788         timer@0 {
 789                 assigned-clocks = <&timer2_fck>;
 790                 assigned-clock-parents = <&devosc_ck>;
 791         };
 792 };