arch/arm/boot/dts/dm814x.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-only
   2
   3 #include <dt-bindings/bus/ti-sysc.h>
   4 #include <dt-bindings/clock/dm814.h>
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/pinctrl/dm814x.h>
   7
   8 / {
   9         compatible = "ti,dm814";
  10         interrupt-parent = <&intc>;
  11         #address-cells = <1>;
  12         #size-cells = <1>;
  13         chosen { };
  14
  15         aliases {
  16                 i2c0 = &i2c1;
  17                 i2c1 = &i2c2;
  18                 serial0 = &uart1;
  19                 serial1 = &uart2;
  20                 serial2 = &uart3;
  21                 ethernet0 = &cpsw_emac0;
  22                 ethernet1 = &cpsw_emac1;
  23                 usb0 = &usb0;
  24                 usb1 = &usb1;
  25                 phy0 = &usb0_phy;
  26                 phy1 = &usb1_phy;
  27         };
  28
  29         cpus {
  30                 #address-cells = <1>;
  31                 #size-cells = <0>;
  32                 cpu@0 {
  33                         compatible = "arm,cortex-a8";
  34                         device_type = "cpu";
  35                         reg = <0>;
  36                 };
  37         };
  38
  39         pmu {
  40                 compatible = "arm,cortex-a8-pmu";
  41                 interrupts = <3>;
  42         };
  43
  44         /*
  45          * The soc node represents the soc top level view. It is used for IPs
  46          * that are not memory mapped in the MPU view or for the MPU itself.
  47          */
  48         soc {
  49                 compatible = "ti,omap-infra";
  50                 mpu {
  51                         compatible = "ti,omap3-mpu";
  52                         ti,hwmods = "mpu";
  53                 };
  54         };
  55
  56         ocp {
  57                 compatible = "simple-bus";
  58                 #address-cells = <1>;
  59                 #size-cells = <1>;
  60                 ranges;
  61                 ti,hwmods = "l3_main";
  62
  63                 usb: usb@47400000 {
  64                         compatible = "ti,am33xx-usb";
  65                         reg = <0x47400000 0x1000>;
  66                         ranges;
  67                         #address-cells = <1>;
  68                         #size-cells = <1>;
  69                         ti,hwmods = "usb_otg_hs";
  70
  71                         usb0_phy: usb-phy@47401300 {
  72                                 compatible = "ti,am335x-usb-phy";
  73                                 reg = <0x47401300 0x100>;
  74                                 reg-names = "phy";
  75                                 ti,ctrl_mod = <&usb_ctrl_mod>;
  76                                 #phy-cells = <0>;
  77                         };
  78
  79                         usb0: usb@47401000 {
  80                                 compatible = "ti,musb-am33xx";
  81                                 reg = <0x47401400 0x400
  82                                        0x47401000 0x200>;
  83                                 reg-names = "mc", "control";
  84
  85                                 interrupts = <18>;
  86                                 interrupt-names = "mc";
  87                                 dr_mode = "otg";
  88                                 mentor,multipoint = <1>;
  89                                 mentor,num-eps = <16>;
  90                                 mentor,ram-bits = <12>;
  91                                 mentor,power = <500>;
  92                                 phys = <&usb0_phy>;
  93
  94                                 dmas = <&cppi41dma  0 0 &cppi41dma  1 0
  95                                         &cppi41dma  2 0 &cppi41dma  3 0
  96                                         &cppi41dma  4 0 &cppi41dma  5 0
  97                                         &cppi41dma  6 0 &cppi41dma  7 0
  98                                         &cppi41dma  8 0 &cppi41dma  9 0
  99                                         &cppi41dma 10 0 &cppi41dma 11 0
 100                                         &cppi41dma 12 0 &cppi41dma 13 0
 101                                         &cppi41dma 14 0 &cppi41dma  0 1
 102                                         &cppi41dma  1 1 &cppi41dma  2 1
 103                                         &cppi41dma  3 1 &cppi41dma  4 1
 104                                         &cppi41dma  5 1 &cppi41dma  6 1
 105                                         &cppi41dma  7 1 &cppi41dma  8 1
 106                                         &cppi41dma  9 1 &cppi41dma 10 1
 107                                         &cppi41dma 11 1 &cppi41dma 12 1
 108                                         &cppi41dma 13 1 &cppi41dma 14 1>;
 109                                 dma-names =
 110                                         "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
 111                                         "rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
 112                                         "rx14", "rx15",
 113                                         "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
 114                                         "tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
 115                                         "tx14", "tx15";
 116                         };
 117
 118                         usb1: usb@47401800 {
 119                                 compatible = "ti,musb-am33xx";
 120                                 reg = <0x47401c00 0x400
 121                                         0x47401800 0x200>;
 122                                 reg-names = "mc", "control";
 123                                 interrupts = <19>;
 124                                 interrupt-names = "mc";
 125                                 dr_mode = "otg";
 126                                 mentor,multipoint = <1>;
 127                                 mentor,num-eps = <16>;
 128                                 mentor,ram-bits = <12>;
 129                                 mentor,power = <500>;
 130                                 phys = <&usb1_phy>;
 131
 132                                 dmas = <&cppi41dma 15 0 &cppi41dma 16 0
 133                                         &cppi41dma 17 0 &cppi41dma 18 0
 134                                         &cppi41dma 19 0 &cppi41dma 20 0
 135                                         &cppi41dma 21 0 &cppi41dma 22 0
 136                                         &cppi41dma 23 0 &cppi41dma 24 0
 137                                         &cppi41dma 25 0 &cppi41dma 26 0
 138                                         &cppi41dma 27 0 &cppi41dma 28 0
 139                                         &cppi41dma 29 0 &cppi41dma 15 1
 140                                         &cppi41dma 16 1 &cppi41dma 17 1
 141                                         &cppi41dma 18 1 &cppi41dma 19 1
 142                                         &cppi41dma 20 1 &cppi41dma 21 1
 143                                         &cppi41dma 22 1 &cppi41dma 23 1
 144                                         &cppi41dma 24 1 &cppi41dma 25 1
 145                                         &cppi41dma 26 1 &cppi41dma 27 1
 146                                         &cppi41dma 28 1 &cppi41dma 29 1>;
 147                                 dma-names =
 148                                         "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
 149                                         "rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
 150                                         "rx14", "rx15",
 151                                         "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
 152                                         "tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
 153                                         "tx14", "tx15";
 154                         };
 155
 156                         cppi41dma: dma-controller@47402000 {
 157                                 compatible = "ti,am3359-cppi41";
 158                                 reg =  <0x47400000 0x1000
 159                                         0x47402000 0x1000
 160                                         0x47403000 0x1000
 161                                         0x47404000 0x4000>;
 162                                 reg-names = "glue", "controller", "scheduler", "queuemgr";
 163                                 interrupts = <17>;
 164                                 interrupt-names = "glue";
 165                                 #dma-cells = <2>;
 166                                 /* For backwards compatibility: */
 167                                 #dma-channels = <30>;
 168                                 dma-channels = <30>;
 169                                 #dma-requests = <256>;
 170                                 dma-requests = <256>;
 171                         };
 172                 };
 173
 174                 /*
 175                  * See TRM "Table 1-317. L4LS Instance Summary" for hints.
 176                  * It shows the module target agent registers though, so the
 177                  * actual device is typically 0x1000 before the target agent
 178                  * except in cases where the module is larger than 0x1000.
 179                  */
 180                 l4ls: l4ls@48000000 {
 181                         compatible = "ti,dm814-l4ls", "simple-bus";
 182                         #address-cells = <1>;
 183                         #size-cells = <1>;
 184                         ranges = <0 0x48000000 0x2000000>;
 185
 186                         i2c1: i2c@28000 {
 187                                 compatible = "ti,omap4-i2c";
 188                                 #address-cells = <1>;
 189                                 #size-cells = <0>;
 190                                 ti,hwmods = "i2c1";
 191                                 reg = <0x28000 0x1000>;
 192                                 interrupts = <70>;
 193                         };
 194
 195                         elm: elm@80000 {
 196                                 compatible = "ti,814-elm";
 197                                 ti,hwmods = "elm";
 198                                 reg = <0x80000 0x2000>;
 199                                 interrupts = <4>;
 200                         };
 201
 202                         gpio1: gpio@32000 {
 203                                 compatible = "ti,omap4-gpio";
 204                                 ti,hwmods = "gpio1";
 205                                 ti,gpio-always-on;
 206                                 reg = <0x32000 0x2000>;
 207                                 interrupts = <96>;
 208                                 gpio-controller;
 209                                 #gpio-cells = <2>;
 210                                 interrupt-controller;
 211                                 #interrupt-cells = <2>;
 212                         };
 213
 214                         gpio2: gpio@4c000 {
 215                                 compatible = "ti,omap4-gpio";
 216                                 ti,hwmods = "gpio2";
 217                                 ti,gpio-always-on;
 218                                 reg = <0x4c000 0x2000>;
 219                                 interrupts = <98>;
 220                                 gpio-controller;
 221                                 #gpio-cells = <2>;
 222                                 interrupt-controller;
 223                                 #interrupt-cells = <2>;
 224                         };
 225
 226                         gpio3: gpio@1ac000 {
 227                                 compatible = "ti,omap4-gpio";
 228                                 ti,hwmods = "gpio3";
 229                                 ti,gpio-always-on;
 230                                 reg = <0x1ac000 0x2000>;
 231                                 interrupts = <32>;
 232                                 gpio-controller;
 233                                 #gpio-cells = <2>;
 234                                 interrupt-controller;
 235                                 #interrupt-cells = <2>;
 236                         };
 237
 238                         gpio4: gpio@1ae000 {
 239                                 compatible = "ti,omap4-gpio";
 240                                 ti,hwmods = "gpio4";
 241                                 ti,gpio-always-on;
 242                                 reg = <0x1ae000 0x2000>;
 243                                 interrupts = <62>;
 244                                 gpio-controller;
 245                                 #gpio-cells = <2>;
 246                                 interrupt-controller;
 247                                 #interrupt-cells = <2>;
 248                         };
 249
 250                         i2c2: i2c@2a000 {
 251                                 compatible = "ti,omap4-i2c";
 252                                 #address-cells = <1>;
 253                                 #size-cells = <0>;
 254                                 ti,hwmods = "i2c2";
 255                                 reg = <0x2a000 0x1000>;
 256                                 interrupts = <71>;
 257                         };
 258
 259                         mcspi1: spi@30000 {
 260                                 compatible = "ti,omap4-mcspi";
 261                                 reg = <0x30000 0x1000>;
 262                                 #address-cells = <1>;
 263                                 #size-cells = <0>;
 264                                 interrupts = <65>;
 265                                 ti,spi-num-cs = <4>;
 266                                 ti,hwmods = "mcspi1";
 267                                 dmas = <&edma 16 0 &edma 17 0
 268                                         &edma 18 0 &edma 19 0
 269                                         &edma 20 0 &edma 21 0
 270                                         &edma 22 0 &edma 23 0>;
 271
 272                                 dma-names = "tx0", "rx0", "tx1", "rx1",
 273                                         "tx2", "rx2", "tx3", "rx3";
 274                         };
 275
 276                         mcspi2: spi@1a0000 {
 277                                 compatible = "ti,omap4-mcspi";
 278                                 reg = <0x1a0000 0x1000>;
 279                                 #address-cells = <1>;
 280                                 #size-cells = <0>;
 281                                 interrupts = <125>;
 282                                 ti,spi-num-cs = <4>;
 283                                 ti,hwmods = "mcspi2";
 284                                 dmas = <&edma 42 0 &edma 43 0
 285                                         &edma 44 0 &edma 45 0>;
 286                                 dma-names = "tx0", "rx0", "tx1", "rx1";
 287                         };
 288
 289                         /* Board must configure dmas with edma_xbar for EDMA */
 290                         mcspi3: spi@1a2000 {
 291                                 compatible = "ti,omap4-mcspi";
 292                                 reg = <0x1a2000 0x1000>;
 293                                 #address-cells = <1>;
 294                                 #size-cells = <0>;
 295                                 interrupts = <126>;
 296                                 ti,spi-num-cs = <4>;
 297                                 ti,hwmods = "mcspi3";
 298                         };
 299
 300                         mcspi4: spi@1a4000 {
 301                                 compatible = "ti,omap4-mcspi";
 302                                 reg = <0x1a4000 0x1000>;
 303                                 #address-cells = <1>;
 304                                 #size-cells = <0>;
 305                                 interrupts = <127>;
 306                                 ti,spi-num-cs = <4>;
 307                                 ti,hwmods = "mcspi4";
 308                         };
 309
 310                         timer1_target: target-module@2e000 {
 311                                 compatible = "ti,sysc-omap4-timer", "ti,sysc";
 312                                 reg = <0x2e000 0x4>,
 313                                       <0x2e010 0x4>;
 314                                 reg-names = "rev", "sysc";
 315                                 ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
 316                                 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 317                                                 <SYSC_IDLE_NO>,
 318                                                 <SYSC_IDLE_SMART>,
 319                                                 <SYSC_IDLE_SMART_WKUP>;
 320                                 clocks = <&timer1_fck>;
 321                                 clock-names = "fck";
 322                                 #address-cells = <1>;
 323                                 #size-cells = <1>;
 324                                 ranges = <0x0 0x2e000 0x1000>;
 325
 326                                 timer1: timer@0 {
 327                                         compatible = "ti,am335x-timer-1ms";
 328                                         reg = <0x0 0x400>;
 329                                         interrupts = <67>;
 330                                         ti,timer-alwon;
 331                                         clocks = <&timer1_fck>;
 332                                         clock-names = "fck";
 333                                 };
 334                         };
 335
 336                         uart1: uart@20000 {
 337                                 compatible = "ti,am3352-uart", "ti,omap3-uart";
 338                                 ti,hwmods = "uart1";
 339                                 reg = <0x20000 0x2000>;
 340                                 clock-frequency = <48000000>;
 341                                 interrupts = <72>;
 342                                 dmas = <&edma 26 0 &edma 27 0>;
 343                                 dma-names = "tx", "rx";
 344                         };
 345
 346                         uart2: uart@22000 {
 347                                 compatible = "ti,am3352-uart", "ti,omap3-uart";
 348                                 ti,hwmods = "uart2";
 349                                 reg = <0x22000 0x2000>;
 350                                 clock-frequency = <48000000>;
 351                                 interrupts = <73>;
 352                                 dmas = <&edma 28 0 &edma 29 0>;
 353                                 dma-names = "tx", "rx";
 354                         };
 355
 356                         uart3: uart@24000 {
 357                                 compatible = "ti,am3352-uart", "ti,omap3-uart";
 358                                 ti,hwmods = "uart3";
 359                                 reg = <0x24000 0x2000>;
 360                                 clock-frequency = <48000000>;
 361                                 interrupts = <74>;
 362                                 dmas = <&edma 30 0 &edma 31 0>;
 363                                 dma-names = "tx", "rx";
 364                         };
 365
 366                         timer2_target: target-module@40000 {
 367                                 compatible = "ti,sysc-omap4-timer", "ti,sysc";
 368                                 reg = <0x40000 0x4>,
 369                                       <0x40010 0x4>;
 370                                 reg-names = "rev", "sysc";
 371                                 ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
 372                                 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 373                                                 <SYSC_IDLE_NO>,
 374                                                 <SYSC_IDLE_SMART>,
 375                                                 <SYSC_IDLE_SMART_WKUP>;
 376                                 clocks = <&timer2_fck>;
 377                                 clock-names = "fck";
 378                                 #address-cells = <1>;
 379                                 #size-cells = <1>;
 380                                 ranges = <0x0 0x40000 0x1000>;
 381
 382                                 timer2: timer@0 {
 383                                         compatible = "ti,dm814-timer";
 384                                         reg = <0 0x1000>;
 385                                         interrupts = <68>;
 386                                         clocks = <&timer2_fck>;
 387                                         clock-names = "fck";
 388                                 };
 389                         };
 390
 391                         timer3: timer@42000 {
 392                                 compatible = "ti,dm814-timer";
 393                                 reg = <0x42000 0x2000>;
 394                                 interrupts = <69>;
 395                                 ti,hwmods = "timer3";
 396                         };
 397
 398                         mmc1: mmc@60000 {
 399                                 compatible = "ti,omap4-hsmmc";
 400                                 ti,hwmods = "mmc1";
 401                                 dmas = <&edma 24 0
 402                                         &edma 25 0>;
 403                                 dma-names = "tx", "rx";
 404                                 interrupts = <64>;
 405                                 interrupt-parent = <&intc>;
 406                                 reg = <0x60000 0x1000>;
 407                         };
 408
 409                         rtc: rtc@c0000 {
 410                                 compatible = "ti,am3352-rtc", "ti,da830-rtc";
 411                                 reg = <0xc0000 0x1000>;
 412                                 interrupts = <75 76>;
 413                                 ti,hwmods = "rtc";
 414                         };
 415
 416                         mmc2: mmc@1d8000 {
 417                                 compatible = "ti,omap4-hsmmc";
 418                                 ti,hwmods = "mmc2";
 419                                 dmas = <&edma 2 0
 420                                         &edma 3 0>;
 421                                 dma-names = "tx", "rx";
 422                                 interrupts = <28>;
 423                                 interrupt-parent = <&intc>;
 424                                 reg = <0x1d8000 0x1000>;
 425                         };
 426
 427                         control: control@140000 {
 428                                 compatible = "ti,dm814-scm", "simple-bus";
 429                                 reg = <0x140000 0x20000>;
 430                                 #address-cells = <1>;
 431                                 #size-cells = <1>;
 432                                 ranges = <0 0x140000 0x20000>;
 433
 434                                 scm_conf: scm_conf@0 {
 435                                         compatible = "syscon", "simple-bus";
 436                                         reg = <0x0 0x800>;
 437                                         #address-cells = <1>;
 438                                         #size-cells = <1>;
 439                                         ranges = <0 0 0x800>;
 440
 441                                         phy_gmii_sel: phy-gmii-sel {
 442                                                 compatible = "ti,dm814-phy-gmii-sel";
 443                                                 reg = <0x650 0x4>;
 444                                                 #phy-cells = <1>;
 445                                         };
 446
 447                                         scm_clocks: clocks {
 448                                                 #address-cells = <1>;
 449                                                 #size-cells = <0>;
 450                                         };
 451
 452                                         scm_clockdomains: clockdomains {
 453                                         };
 454                                 };
 455
 456                                 usb_ctrl_mod: control@620 {
 457                                         compatible = "ti,am335x-usb-ctrl-module";
 458                                         reg = <0x620 0x10
 459                                                 0x648 0x4>;
 460                                         reg-names = "phy_ctrl", "wakeup";
 461                                 };
 462
 463                                 edma_xbar: dma-router@f90 {
 464                                         compatible = "ti,am335x-edma-crossbar";
 465                                         reg = <0xf90 0x40>;
 466                                         #dma-cells = <3>;
 467                                         dma-requests = <32>;
 468                                         dma-masters = <&edma>;
 469                                 };
 470
 471                                 /*
 472                                  * Note that silicon revision 2.1 and older
 473                                  * require input enabled (bit 18 set) for all
 474                                  * 3.3V I/Os to avoid cumulative hardware damage.
 475                                  * For more info, see errata advisory 2.1.87.
 476                                  * We leave bit 18 out of function-mask and rely
 477                                  * on the bootloader for it.
 478                                  */
 479                                 pincntl: pinmux@800 {
 480                                         compatible = "pinctrl-single";
 481                                         reg = <0x800 0x438>;
 482                                         #address-cells = <1>;
 483                                         #size-cells = <0>;
 484                                         #pinctrl-cells = <1>;
 485                                         pinctrl-single,register-width = <32>;
 486                                         pinctrl-single,function-mask = <0x307ff>;
 487                                 };
 488
 489                                 usb1_phy: usb-phy@1b00 {
 490                                         compatible = "ti,am335x-usb-phy";
 491                                         reg = <0x1b00 0x100>;
 492                                         reg-names = "phy";
 493                                         ti,ctrl_mod = <&usb_ctrl_mod>;
 494                                         #phy-cells = <0>;
 495                                 };
 496                         };
 497
 498                         prcm: prcm@180000 {
 499                                 compatible = "ti,dm814-prcm", "simple-bus";
 500                                 reg = <0x180000 0x2000>;
 501                                 #address-cells = <1>;
 502                                 #size-cells = <1>;
 503                                 ranges = <0 0x180000 0x2000>;
 504
 505                                 prcm_clocks: clocks {
 506                                         #address-cells = <1>;
 507                                         #size-cells = <0>;
 508                                 };
 509
 510                                 prcm_clockdomains: clockdomains {
 511                                 };
 512                         };
 513
 514                         /* See TRM PLL_SUBSYS_BASE and "PLLSS Registers" */
 515                         pllss: pllss@1c5000 {
 516                                 compatible = "ti,dm814-pllss", "simple-bus";
 517                                 reg = <0x1c5000 0x1000>;
 518                                 #address-cells = <1>;
 519                                 #size-cells = <1>;
 520                                 ranges = <0 0x1c5000 0x1000>;
 521
 522                                 pllss_clocks: clocks {
 523                                         #address-cells = <1>;
 524                                         #size-cells = <0>;
 525                                 };
 526
 527                                 pllss_clockdomains: clockdomains {
 528                                 };
 529                         };
 530
 531                         wdt1: wdt@1c7000 {
 532                                 compatible = "ti,omap3-wdt";
 533                                 ti,hwmods = "wd_timer";
 534                                 reg = <0x1c7000 0x1000>;
 535                                 interrupts = <91>;
 536                         };
 537                 };
 538
 539                 intc: interrupt-controller@48200000 {
 540                         compatible = "ti,dm814-intc";
 541                         interrupt-controller;
 542                         #interrupt-cells = <1>;
 543                         reg = <0x48200000 0x1000>;
 544                 };
 545
 546                 /* Board must configure evtmux with edma_xbar for EDMA */
 547                 mmc3: mmc@47810000 {
 548                         compatible = "ti,omap4-hsmmc";
 549                         ti,hwmods = "mmc3";
 550                         interrupts = <29>;
 551                         interrupt-parent = <&intc>;
 552                         reg = <0x47810000 0x1000>;
 553                 };
 554
 555                 target-module@49000000 {
 556                         compatible = "ti,sysc-omap4", "ti,sysc";
 557                         reg = <0x49000000 0x4>;
 558                         reg-names = "rev";
 559                         clocks = <&alwon_clkctrl DM814_TPCC_CLKCTRL 0>;
 560                         clock-names = "fck";
 561                         #address-cells = <1>;
 562                         #size-cells = <1>;
 563                         ranges = <0x0 0x49000000 0x10000>;
 564
 565                         edma: dma@0 {
 566                                 compatible = "ti,edma3-tpcc";
 567                                 reg = <0 0x10000>;
 568                                 reg-names = "edma3_cc";
 569                                 interrupts = <12 13 14>;
 570                                 interrupt-names = "edma3_ccint", "edma3_mperr",
 571                                                   "edma3_ccerrint";
 572                                 dma-requests = <64>;
 573                                 #dma-cells = <2>;
 574
 575                                 ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
 576                                            <&edma_tptc2 3>, <&edma_tptc3 0>;
 577
 578                                 ti,edma-memcpy-channels = <20 21>;
 579                         };
 580                 };
 581
 582                 target-module@49800000 {
 583                         compatible = "ti,sysc-omap4", "ti,sysc";
 584                         reg = <0x49800000 0x4>,
 585                               <0x49800010 0x4>;
 586                         reg-names = "rev", "sysc";
 587                         ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
 588                         ti,sysc-midle = <SYSC_IDLE_FORCE>;
 589                         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 590                                         <SYSC_IDLE_SMART>;
 591                         clocks = <&alwon_clkctrl DM814_TPTC0_CLKCTRL 0>;
 592                         clock-names = "fck";
 593                         #address-cells = <1>;
 594                         #size-cells = <1>;
 595                         ranges = <0x0 0x49800000 0x100000>;
 596
 597                         edma_tptc0: dma@0 {
 598                                 compatible = "ti,edma3-tptc";
 599                                 reg = <0 0x100000>;
 600                                 interrupts = <112>;
 601                                 interrupt-names = "edma3_tcerrint";
 602                         };
 603                 };
 604
 605                 target-module@49900000 {
 606                         compatible = "ti,sysc-omap4", "ti,sysc";
 607                         reg = <0x49900000 0x4>,
 608                               <0x49900010 0x4>;
 609                         reg-names = "rev", "sysc";
 610                         ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
 611                         ti,sysc-midle = <SYSC_IDLE_FORCE>;
 612                         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 613                                         <SYSC_IDLE_SMART>;
 614                         clocks = <&alwon_clkctrl DM814_TPTC1_CLKCTRL 0>;
 615                         clock-names = "fck";
 616                         #address-cells = <1>;
 617                         #size-cells = <1>;
 618                         ranges = <0x0 0x49900000 0x100000>;
 619
 620                         edma_tptc1: dma@0 {
 621                                 compatible = "ti,edma3-tptc";
 622                                 reg = <0 0x100000>;
 623                                 interrupts = <113>;
 624                                 interrupt-names = "edma3_tcerrint";
 625                         };
 626                 };
 627
 628                 target-module@49a00000 {
 629                         compatible = "ti,sysc-omap4", "ti,sysc";
 630                         reg = <0x49a00000 0x4>,
 631                               <0x49a00010 0x4>;
 632                         reg-names = "rev", "sysc";
 633                         ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
 634                         ti,sysc-midle = <SYSC_IDLE_FORCE>;
 635                         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 636                                         <SYSC_IDLE_SMART>;
 637                         clocks = <&alwon_clkctrl DM814_TPTC2_CLKCTRL 0>;
 638                         clock-names = "fck";
 639                         #address-cells = <1>;
 640                         #size-cells = <1>;
 641                         ranges = <0x0 0x49a00000 0x100000>;
 642
 643                         edma_tptc2: dma@0 {
 644                                 compatible = "ti,edma3-tptc";
 645                                 reg = <0 0x100000>;
 646                                 interrupts = <114>;
 647                                 interrupt-names = "edma3_tcerrint";
 648                         };
 649                 };
 650
 651                 target-module@49b00000 {
 652                         compatible = "ti,sysc-omap4", "ti,sysc";
 653                         reg = <0x49b00000 0x4>,
 654                               <0x49b00010 0x4>;
 655                         reg-names = "rev", "sysc";
 656                         ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
 657                         ti,sysc-midle = <SYSC_IDLE_FORCE>;
 658                         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 659                                         <SYSC_IDLE_SMART>;
 660                         clocks = <&alwon_clkctrl DM814_TPTC3_CLKCTRL 0>;
 661                         clock-names = "fck";
 662                         #address-cells = <1>;
 663                         #size-cells = <1>;
 664                         ranges = <0x0 0x49b00000 0x100000>;
 665
 666                         edma_tptc3: dma@0 {
 667                                 compatible = "ti,edma3-tptc";
 668                                 reg = <0 0x100000>;
 669                                 interrupts = <115>;
 670                                 interrupt-names = "edma3_tcerrint";
 671                         };
 672                 };
 673
 674                 /* See TRM "Table 1-318. L4HS Instance Summary" */
 675                 l4hs: l4hs@4a000000 {
 676                         compatible = "ti,dm814-l4hs", "simple-bus";
 677                         #address-cells = <1>;
 678                         #size-cells = <1>;
 679                         ranges = <0 0x4a000000 0x1b4040>;
 680
 681                         target-module@100000 {
 682                                 compatible = "ti,sysc-omap4-simple", "ti,sysc";
 683                                 reg = <0x100900 0x4>,
 684                                       <0x100908 0x4>,
 685                                       <0x100904 0x4>;
 686                                 reg-names = "rev", "sysc", "syss";
 687                                 ti,sysc-mask = <0>;
 688                                 ti,sysc-midle = <SYSC_IDLE_FORCE>,
 689                                                 <SYSC_IDLE_NO>;
 690                                 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 691                                                 <SYSC_IDLE_NO>;
 692                                 ti,syss-mask = <1>;
 693                                 clocks = <&alwon_ethernet_clkctrl DM814_ETHERNET_CPGMAC0_CLKCTRL 0>;
 694                                 clock-names = "fck";
 695                                 #address-cells = <1>;
 696                                 #size-cells = <1>;
 697                                 ranges = <0 0x100000 0x8000>;
 698
 699                                 mac: ethernet@0 {
 700                                         compatible = "ti,cpsw";
 701                                         clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>;
 702                                         clock-names = "fck", "cpts";
 703                                         cpdma_channels = <8>;
 704                                         ale_entries = <1024>;
 705                                         bd_ram_size = <0x2000>;
 706                                         mac_control = <0x20>;
 707                                         slaves = <2>;
 708                                         active_slave = <0>;
 709                                         cpts_clock_mult = <0x80000000>;
 710                                         cpts_clock_shift = <29>;
 711                                         reg = <0 0x800>,
 712                                               <0x900 0x100>;
 713                                         #address-cells = <1>;
 714                                         #size-cells = <1>;
 715                                         /*
 716                                         * c0_rx_thresh_pend
 717                                         * c0_rx_pend
 718                                         * c0_tx_pend
 719                                         * c0_misc_pend
 720                                         */
 721                                         interrupts = <40 41 42 43>;
 722                                         ranges = <0 0 0x8000>;
 723                                         syscon = <&scm_conf>;
 724
 725                                         davinci_mdio: mdio@800 {
 726                                                 compatible = "ti,cpsw-mdio", "ti,davinci_mdio";
 727                                                 clocks = <&cpsw_125mhz_gclk>;
 728                                                 clock-names = "fck";
 729                                                 #address-cells = <1>;
 730                                                 #size-cells = <0>;
 731                                                 bus_freq = <1000000>;
 732                                                 reg = <0x800 0x100>;
 733                                         };
 734
 735                                         cpsw_emac0: slave@200 {
 736                                                 /* Filled in by U-Boot */
 737                                                 mac-address = [ 00 00 00 00 00 00 ];
 738                                                 phys = <&phy_gmii_sel 1>;
 739                                         };
 740
 741                                         cpsw_emac1: slave@300 {
 742                                                 /* Filled in by U-Boot */
 743                                                 mac-address = [ 00 00 00 00 00 00 ];
 744                                                 phys = <&phy_gmii_sel 2>;
 745                                         };
 746                                 };
 747                         };
 748                 };
 749
 750                 gpmc: gpmc@50000000 {
 751                         compatible = "ti,am3352-gpmc";
 752                         ti,hwmods = "gpmc";
 753                         ti,no-idle-on-init;
 754                         reg = <0x50000000 0x2000>;
 755                         interrupts = <100>;
 756                         gpmc,num-cs = <7>;
 757                         gpmc,num-waitpins = <2>;
 758                         #address-cells = <2>;
 759                         #size-cells = <1>;
 760                         interrupt-controller;
 761                         #interrupt-cells = <2>;
 762                         gpio-controller;
 763                         #gpio-cells = <2>;
 764                 };
 765         };
 766 };
 767
 768 #include "dm814x-clocks.dtsi"
 769
 770 /* Preferred always-on timer for clocksource */
 771 &timer1_target {
 772         ti,no-reset-on-init;
 773         ti,no-idle;
 774         timer@0 {
 775                 assigned-clocks = <&timer1_fck>;
 776                 assigned-clock-parents = <&devosc_ck>;
 777         };
 778 };
 779
 780 /* Preferred timer for clockevent */
 781 &timer2_target {
 782         ti,no-reset-on-init;
 783         ti,no-idle;
 784         timer@0 {
 785                 assigned-clocks = <&timer2_fck>;
 786                 assigned-clock-parents = <&devosc_ck>;
 787         };
 788 };