arch/arm/boot/dts/bcm958625hr.dts

   1 /*
   2  *  BSD LICENSE
   3  *
   4  *  Copyright(c) 2016 Broadcom.  All rights reserved.
   5  *
   6  *  Redistribution and use in source and binary forms, with or without
   7  *  modification, are permitted provided that the following conditions
   8  *  are met:
   9  *
  10  *    * Redistributions of source code must retain the above copyright
  11  *      notice, this list of conditions and the following disclaimer.
  12  *    * Redistributions in binary form must reproduce the above copyright
  13  *      notice, this list of conditions and the following disclaimer in
  14  *      the documentation and/or other materials provided with the
  15  *      distribution.
  16  *    * Neither the name of Broadcom Corporation nor the names of its
  17  *      contributors may be used to endorse or promote products derived
  18  *      from this software without specific prior written permission.
  19  *
  20  *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  21  *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  22  *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
  23  *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  24  *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  25  *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  26  *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  27  *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  28  *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  29  *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  30  *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  31  */
  32
  33 /dts-v1/;
  34
  35 #include "bcm-nsp.dtsi"
  36 #include <dt-bindings/gpio/gpio.h>
  37
  38 / {
  39         model = "NorthStar Plus SVK (BCM958625HR)";
  40         compatible = "brcm,bcm958625hr", "brcm,bcm58625", "brcm,nsp";
  41
  42         chosen {
  43                 stdout-path = "serial0:115200n8";
  44         };
  45
  46         memory@60000000 {
  47                 device_type = "memory";
  48                 reg = <0x60000000 0x20000000>;
  49         };
  50
  51         gpio-restart {
  52                 compatible = "gpio-restart";
  53                 gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
  54                 open-source;
  55                 priority = <200>;
  56         };
  57
  58         sfp: sfp {
  59                 compatible = "sff,sfp";
  60                 i2c-bus = <&i2c0>;
  61                 mod-def0-gpios = <&gpioa 28 GPIO_ACTIVE_LOW>;
  62                 los-gpios = <&gpioa 24 GPIO_ACTIVE_HIGH>;
  63                 tx-fault-gpios = <&gpioa 30 GPIO_ACTIVE_HIGH>;
  64                 tx-disable-gpios = <&gpioa 26 GPIO_ACTIVE_HIGH>;
  65         };
  66 };
  67
  68 &i2c0 {
  69         status = "okay";
  70 };
  71
  72 &dma {
  73         status = "okay";
  74 };
  75
  76 &amac0 {
  77         status = "okay";
  78 };
  79
  80 &amac1 {
  81         status = "okay";
  82 };
  83
  84 &amac2 {
  85         status = "okay";
  86 };
  87
  88 &ehci0 {
  89         status = "okay";
  90 };
  91
  92 &nand_controller {
  93         nand@0 {
  94                 compatible = "brcm,nandcs";
  95                 reg = <0>;
  96                 nand-on-flash-bbt;
  97
  98                 #address-cells = <1>;
  99                 #size-cells = <1>;
 100
 101                 nand-ecc-strength = <24>;
 102                 nand-ecc-step-size = <1024>;
 103
 104                 brcm,nand-oob-sector-size = <27>;
 105
 106                 partition@0 {
 107                         label = "nboot";
 108                         reg = <0x00000000 0x00200000>;
 109                         read-only;
 110                 };
 111                 partition@200000 {
 112                         label = "nenv";
 113                         reg = <0x00200000 0x00400000>;
 114                 };
 115                 partition@600000 {
 116                         label = "nsystem";
 117                         reg = <0x00600000 0x00a00000>;
 118                 };
 119                 partition@1000000 {
 120                         label = "nrootfs";
 121                         reg = <0x01000000 0x03000000>;
 122                 };
 123                 partition@4000000 {
 124                         label = "ncustfs";
 125                         reg = <0x04000000 0x3c000000>;
 126                 };
 127         };
 128 };
 129
 130 &ohci0 {
 131         status = "okay";
 132 };
 133
 134 &pcie0 {
 135         status = "okay";
 136 };
 137
 138 &pcie1 {
 139         status = "okay";
 140 };
 141
 142 &pinctrl {
 143         pinctrl-names = "default";
 144         pinctrl-0 = <&nand_sel>;
 145         nand_sel: nand_sel {
 146                 function = "nand";
 147                 groups = "nand_grp";
 148         };
 149 };
 150
 151 &qspi {
 152         status = "okay";
 153         bspi-sel = <0>;
 154         flash: flash@0 {
 155                 #address-cells = <1>;
 156                 #size-cells = <1>;
 157                 compatible = "m25p80";
 158                 reg = <0x0>;
 159                 spi-max-frequency = <12500000>;
 160                 m25p,fast-read;
 161                 spi-cpol;
 162                 spi-cpha;
 163
 164                 partition@0 {
 165                         label = "boot";
 166                         reg = <0x00000000 0x000a0000>;
 167                 };
 168
 169                 partition@a0000 {
 170                         label = "env";
 171                         reg = <0x000a0000 0x00060000>;
 172                 };
 173
 174                 partition@100000 {
 175                         label = "system";
 176                         reg = <0x00100000 0x00600000>;
 177                 };
 178
 179                 partition@700000 {
 180                         label = "rootfs";
 181                         reg = <0x00700000 0x01900000>;
 182                 };
 183         };
 184 };
 185
 186 &sata_phy0 {
 187         status = "okay";
 188 };
 189
 190 &sata_phy1 {
 191         status = "okay";
 192 };
 193
 194 &srab {
 195         compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
 196         status = "okay";
 197
 198         ports {
 199                 port@0 {
 200                         label = "port0";
 201                         reg = <0>;
 202                 };
 203
 204                 port@1 {
 205                         label = "port1";
 206                         reg = <1>;
 207                 };
 208
 209                 port@2 {
 210                         label = "port2";
 211                         reg = <2>;
 212                 };
 213
 214                 port@3 {
 215                         label = "port3";
 216                         reg = <3>;
 217                 };
 218
 219                 port@4 {
 220                         label = "port4";
 221                         reg = <4>;
 222                 };
 223
 224                 port@5 {
 225                         label = "sfp";
 226                         phy-mode = "sgmii";
 227                         reg = <5>;
 228                         sfp = <&sfp>;
 229                         managed = "in-band-status";
 230                 };
 231
 232                 port@8 {
 233                         ethernet = <&amac2>;
 234                         label = "cpu";
 235                         reg = <8>;
 236                         fixed-link {
 237                                 speed = <1000>;
 238                                 full-duplex;
 239                         };
 240                 };
 241         };
 242 };
 243
 244 &uart0 {
 245         status = "okay";
 246 };
 247
 248 &usb3_phy {
 249         status = "okay";
 250 };
 251
 252 &xhci {
 253         status = "okay";
 254 };