arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /*
   3  * Copyright (C) 2017 Luxul Inc.
   4  */
   5
   6 /dts-v1/;
   7
   8 #include "bcm4708.dtsi"
   9 #include "bcm5301x-nand-cs0-bch8.dtsi"
  10
  11 / {
  12         compatible = "luxul,xbr-4500-v1", "brcm,bcm47094", "brcm,bcm4708";
  13         model = "Luxul XBR-4500 V1";
  14
  15         chosen {
  16                 bootargs = "earlycon";
  17         };
  18
  19         memory@0 {
  20                 device_type = "memory";
  21                 reg = <0x00000000 0x08000000>,
  22                       <0x88000000 0x18000000>;
  23         };
  24
  25         nvram@1eff0000 {
  26                 compatible = "brcm,nvram";
  27                 reg = <0x1eff0000 0x10000>;
  28         };
  29
  30         leds {
  31                 compatible = "gpio-leds";
  32
  33                 status {
  34                         label = "bcm53xx:green:status";
  35                         gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
  36                         linux,default-trigger = "timer";
  37                 };
  38
  39                 usb3 {
  40                         label = "bcm53xx:green:usb3";
  41                         gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
  42                         trigger-sources = <&ohci_port1>, <&ehci_port1>,
  43                                 <&xhci_port1>;
  44                         linux,default-trigger = "usbport";
  45                 };
  46
  47         };
  48
  49         gpio-keys {
  50                 compatible = "gpio-keys";
  51
  52                 button-restart {
  53                         label = "Reset";
  54                         linux,code = <KEY_RESTART>;
  55                         gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
  56                 };
  57         };
  58 };
  59
  60 &usb3 {
  61         vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
  62 };
  63
  64 &spi_nor {
  65         status = "okay";
  66 };
  67
  68 &usb3_phy {
  69         status = "okay";
  70 };
  71
  72 &srab {
  73         status = "okay";
  74
  75         ports {
  76                 port@0 {
  77                         reg = <0>;
  78                         label = "wan";
  79                 };
  80
  81                 port@1 {
  82                         reg = <1>;
  83                         label = "lan4";
  84                 };
  85
  86                 port@2 {
  87                         reg = <2>;
  88                         label = "lan3";
  89                 };
  90
  91                 port@3 {
  92                         reg = <3>;
  93                         label = "lan2";
  94                 };
  95
  96                 port@4 {
  97                         reg = <4>;
  98                         label = "lan1";
  99                 };
 100
 101                 port@5 {
 102                         reg = <5>;
 103                         label = "cpu";
 104                         ethernet = <&gmac0>;
 105                 };
 106         };
 107 };