arch/arm/boot/dts/bcm23550.dtsi

   1 /*
   2  *  BSD LICENSE
   3  *
   4  *  Copyright(c) 2016 Broadcom.  All rights reserved.
   5  *
   6  *  Redistribution and use in source and binary forms, with or without
   7  *  modification, are permitted provided that the following conditions
   8  *  are met:
   9  *
  10  *    * Redistributions of source code must retain the above copyright
  11  *      notice, this list of conditions and the following disclaimer.
  12  *    * Redistributions in binary form must reproduce the above copyright
  13  *      notice, this list of conditions and the following disclaimer in
  14  *      the documentation and/or other materials provided with the
  15  *      distribution.
  16  *    * Neither the name of Broadcom Corporation nor the names of its
  17  *      contributors may be used to endorse or promote products derived
  18  *      from this software without specific prior written permission.
  19  *
  20  *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  21  *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  22  *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
  23  *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  24  *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  25  *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  26  *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  27  *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  28  *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  29  *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  30  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  31  */
  32
  33 #include <dt-bindings/interrupt-controller/arm-gic.h>
  34 #include <dt-bindings/interrupt-controller/irq.h>
  35
  36 /* BCM23550 and BCM21664 have almost identical clocks */
  37 #include "dt-bindings/clock/bcm21664.h"
  38
  39 #include "skeleton.dtsi"
  40
  41 / {
  42         model = "BCM23550 SoC";
  43         compatible = "brcm,bcm23550";
  44         interrupt-parent = <&gic>;
  45
  46         cpus {
  47                 #address-cells = <1>;
  48                 #size-cells = <0>;
  49
  50                 cpu0: cpu@0 {
  51                         device_type = "cpu";
  52                         compatible = "arm,cortex-a7";
  53                         reg = <0>;
  54                         clock-frequency = <1000000000>;
  55                 };
  56
  57                 cpu1: cpu@1 {
  58                         device_type = "cpu";
  59                         compatible = "arm,cortex-a7";
  60                         enable-method = "brcm,bcm23550";
  61                         secondary-boot-reg = <0x35004178>;
  62                         reg = <1>;
  63                         clock-frequency = <1000000000>;
  64                 };
  65
  66                 cpu2: cpu@2 {
  67                         device_type = "cpu";
  68                         compatible = "arm,cortex-a7";
  69                         enable-method = "brcm,bcm23550";
  70                         secondary-boot-reg = <0x35004178>;
  71                         reg = <2>;
  72                         clock-frequency = <1000000000>;
  73                 };
  74
  75                 cpu3: cpu@3 {
  76                         device_type = "cpu";
  77                         compatible = "arm,cortex-a7";
  78                         enable-method = "brcm,bcm23550";
  79                         secondary-boot-reg = <0x35004178>;
  80                         reg = <3>;
  81                         clock-frequency = <1000000000>;
  82                 };
  83         };
  84
  85         /* Hub bus */
  86         hub@34000000 {
  87                 compatible = "simple-bus";
  88                 ranges = <0 0x34000000 0x102f83ac>;
  89                 #address-cells = <1>;
  90                 #size-cells = <1>;
  91
  92                 smc@4e000 {
  93                         compatible = "brcm,bcm23550-smc", "brcm,kona-smc";
  94                         reg = <0x0004e000 0x400>; /* 1 KiB in SRAM */
  95                 };
  96
  97                 resetmgr: reset-controller@1001f00 {
  98                         compatible = "brcm,bcm21664-resetmgr";
  99                         reg = <0x01001f00 0x24>;
 100                 };
 101
 102                 gpio: gpio@1003000 {
 103                         compatible = "brcm,bcm23550-gpio", "brcm,kona-gpio";
 104                         reg = <0x01003000 0x524>;
 105                         interrupts =
 106                                <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH
 107                                 GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH
 108                                 GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH
 109                                 GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 110                         #gpio-cells = <2>;
 111                         #interrupt-cells = <2>;
 112                         gpio-controller;
 113                         interrupt-controller;
 114                 };
 115
 116                 timer@1006000 {
 117                         compatible = "brcm,kona-timer";
 118                         reg = <0x01006000 0x1c>;
 119                         interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 120                         clocks = <&aon_ccu BCM21664_AON_CCU_HUB_TIMER>;
 121                 };
 122         };
 123
 124         /* Slaves bus */
 125         slaves@3e000000 {
 126                 compatible = "simple-bus";
 127                 ranges = <0 0x3e000000 0x0001c070>;
 128                 #address-cells = <1>;
 129                 #size-cells = <1>;
 130
 131                 uartb: serial@0 {
 132                         compatible = "snps,dw-apb-uart";
 133                         status = "disabled";
 134                         reg = <0x00000000 0x118>;
 135                         clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>;
 136                         interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 137                         reg-shift = <2>;
 138                         reg-io-width = <4>;
 139                 };
 140
 141                 uartb2: serial@1000 {
 142                         compatible = "snps,dw-apb-uart";
 143                         status = "disabled";
 144                         reg = <0x00001000 0x118>;
 145                         clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>;
 146                         interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
 147                         reg-shift = <2>;
 148                         reg-io-width = <4>;
 149                 };
 150
 151                 uartb3: serial@2000 {
 152                         compatible = "snps,dw-apb-uart";
 153                         status = "disabled";
 154                         reg = <0x00002000 0x118>;
 155                         clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>;
 156                         interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 157                         reg-shift = <2>;
 158                         reg-io-width = <4>;
 159                 };
 160
 161                 bsc1: i2c@16000 {
 162                         compatible = "brcm,kona-i2c";
 163                         reg = <0x00016000 0x70>;
 164                         interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 165                         #address-cells = <1>;
 166                         #size-cells = <0>;
 167                         clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC1>;
 168                         status = "disabled";
 169                 };
 170
 171                 bsc2: i2c@17000 {
 172                         compatible = "brcm,kona-i2c";
 173                         reg = <0x00017000 0x70>;
 174                         interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
 175                         #address-cells = <1>;
 176                         #size-cells = <0>;
 177                         clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC2>;
 178                         status = "disabled";
 179                 };
 180
 181                 bsc3: i2c@18000 {
 182                         compatible = "brcm,kona-i2c";
 183                         reg = <0x00018000 0x70>;
 184                         interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
 185                         #address-cells = <1>;
 186                         #size-cells = <0>;
 187                         clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC3>;
 188                         status = "disabled";
 189                 };
 190
 191                 bsc4: i2c@1c000 {
 192                         compatible = "brcm,kona-i2c";
 193                         reg = <0x0001c000 0x70>;
 194                         interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
 195                         #address-cells = <1>;
 196                         #size-cells = <0>;
 197                         clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC4>;
 198                         status = "disabled";
 199                 };
 200         };
 201
 202         /* Apps bus */
 203         apps@3e300000 {
 204                 compatible = "simple-bus";
 205                 ranges = <0 0x3e300000 0x01b77000>;
 206                 #address-cells = <1>;
 207                 #size-cells = <1>;
 208
 209                 usbotg: usb@e20000 {
 210                         compatible = "snps,dwc2";
 211                         reg = <0x00e20000 0x10000>;
 212                         interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
 213                         clocks = <&usb_otg_ahb_clk>;
 214                         clock-names = "otg";
 215                         phys = <&usbphy>;
 216                         phy-names = "usb2-phy";
 217                         status = "disabled";
 218                 };
 219
 220                 usbphy: usb-phy@e30000 {
 221                         compatible = "brcm,kona-usb2-phy";
 222                         reg = <0x00e30000 0x28>;
 223                         #phy-cells = <0>;
 224                         status = "disabled";
 225                 };
 226
 227                 sdio1: sdio@e80000 {
 228                         compatible = "brcm,kona-sdhci";
 229                         reg = <0x00e80000 0x801c>;
 230                         interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
 231                         clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO1>;
 232                         status = "disabled";
 233                 };
 234
 235                 sdio2: sdio@e90000 {
 236                         compatible = "brcm,kona-sdhci";
 237                         reg = <0x00e90000 0x801c>;
 238                         interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 239                         clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO2>;
 240                         status = "disabled";
 241                 };
 242
 243                 sdio3: sdio@ea0000 {
 244                         compatible = "brcm,kona-sdhci";
 245                         reg = <0x00ea0000 0x801c>;
 246                         interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 247                         clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO3>;
 248                         status = "disabled";
 249                 };
 250
 251                 sdio4: sdio@eb0000 {
 252                         compatible = "brcm,kona-sdhci";
 253                         reg = <0x00eb0000 0x801c>;
 254                         interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 255                         clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO4>;
 256                         status = "disabled";
 257                 };
 258
 259                 cdc: cdc@1b0e000 {
 260                         compatible = "brcm,bcm23550-cdc";
 261                         reg = <0x01b0e000 0x78>;
 262                 };
 263
 264                 gic: interrupt-controller@1b21000 {
 265                         compatible = "arm,cortex-a9-gic";
 266                         #interrupt-cells = <3>;
 267                         #address-cells = <0>;
 268                         interrupt-controller;
 269                         reg = <0x01b21000 0x1000>,
 270                               <0x01b22000 0x1000>;
 271                 };
 272         };
 273
 274         clocks {
 275                 #address-cells = <1>;
 276                 #size-cells = <1>;
 277                 ranges;
 278
 279                 /*
 280                  * Fixed clocks are defined before CCUs whose
 281                  * clocks may depend on them.
 282                  */
 283
 284                 ref_32k_clk: ref_32k {
 285                         #clock-cells = <0>;
 286                         compatible = "fixed-clock";
 287                         clock-frequency = <32768>;
 288                 };
 289
 290                 bbl_32k_clk: bbl_32k {
 291                         #clock-cells = <0>;
 292                         compatible = "fixed-clock";
 293                         clock-frequency = <32768>;
 294                 };
 295
 296                 ref_13m_clk: ref_13m {
 297                         #clock-cells = <0>;
 298                         compatible = "fixed-clock";
 299                         clock-frequency = <13000000>;
 300                 };
 301
 302                 var_13m_clk: var_13m {
 303                         #clock-cells = <0>;
 304                         compatible = "fixed-clock";
 305                         clock-frequency = <13000000>;
 306                 };
 307
 308                 dft_19_5m_clk: dft_19_5m {
 309                         #clock-cells = <0>;
 310                         compatible = "fixed-clock";
 311                         clock-frequency = <19500000>;
 312                 };
 313
 314                 ref_crystal_clk: ref_crystal {
 315                         #clock-cells = <0>;
 316                         compatible = "fixed-clock";
 317                         clock-frequency = <26000000>;
 318                 };
 319
 320                 ref_52m_clk: ref_52m {
 321                         #clock-cells = <0>;
 322                         compatible = "fixed-clock";
 323                         clock-frequency = <52000000>;
 324                 };
 325
 326                 var_52m_clk: var_52m {
 327                         #clock-cells = <0>;
 328                         compatible = "fixed-clock";
 329                         clock-frequency = <52000000>;
 330                 };
 331
 332                 usb_otg_ahb_clk: usb_otg_ahb {
 333                         #clock-cells = <0>;
 334                         compatible = "fixed-clock";
 335                         clock-frequency = <52000000>;
 336                 };
 337
 338                 ref_96m_clk: ref_96m {
 339                         #clock-cells = <0>;
 340                         compatible = "fixed-clock";
 341                         clock-frequency = <96000000>;
 342                 };
 343
 344                 var_96m_clk: var_96m {
 345                         #clock-cells = <0>;
 346                         compatible = "fixed-clock";
 347                         clock-frequency = <96000000>;
 348                 };
 349
 350                 ref_104m_clk: ref_104m {
 351                         #clock-cells = <0>;
 352                         compatible = "fixed-clock";
 353                         clock-frequency = <104000000>;
 354                 };
 355
 356                 var_104m_clk: var_104m {
 357                         #clock-cells = <0>;
 358                         compatible = "fixed-clock";
 359                         clock-frequency = <104000000>;
 360                 };
 361
 362                 ref_156m_clk: ref_156m {
 363                         #clock-cells = <0>;
 364                         compatible = "fixed-clock";
 365                         clock-frequency = <156000000>;
 366                 };
 367
 368                 var_156m_clk: var_156m {
 369                         #clock-cells = <0>;
 370                         compatible = "fixed-clock";
 371                         clock-frequency = <156000000>;
 372                 };
 373
 374                 root_ccu: root_ccu {
 375                         compatible = BCM21664_DT_ROOT_CCU_COMPAT;
 376                         reg = <0x35001000 0x0f00>;
 377                         #clock-cells = <1>;
 378                         clock-output-names = "frac_1m";
 379                 };
 380
 381                 aon_ccu: aon_ccu {
 382                         compatible = BCM21664_DT_AON_CCU_COMPAT;
 383                         reg = <0x35002000 0x0f00>;
 384                         #clock-cells = <1>;
 385                         clock-output-names = "hub_timer";
 386                 };
 387
 388                 slave_ccu: slave_ccu {
 389                         compatible = BCM21664_DT_SLAVE_CCU_COMPAT;
 390                         reg = <0x3e011000 0x0f00>;
 391                         #clock-cells = <1>;
 392                         clock-output-names = "uartb",
 393                                              "uartb2",
 394                                              "uartb3",
 395                                              "bsc1",
 396                                              "bsc2",
 397                                              "bsc3",
 398                                              "bsc4";
 399                 };
 400
 401                 master_ccu: master_ccu {
 402                         compatible = BCM21664_DT_MASTER_CCU_COMPAT;
 403                         reg = <0x3f001000 0x0f00>;
 404                         #clock-cells = <1>;
 405                         clock-output-names = "sdio1",
 406                                              "sdio2",
 407                                              "sdio3",
 408                                              "sdio4",
 409                                              "sdio1_sleep",
 410                                              "sdio2_sleep",
 411                                              "sdio3_sleep",
 412                                              "sdio4_sleep";
 413                 };
 414         };
 415 };