arch/arm/boot/dts/at91sam9x5.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * at91sam9x5.dtsi - Device Tree Include file for AT91SAM9x5 family SoC
   4  *                   applies to AT91SAM9G15, AT91SAM9G25, AT91SAM9G35,
   5  *                   AT91SAM9X25, AT91SAM9X35 SoC
   6  *
   7  *  Copyright (C) 2012 Atmel,
   8  *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
   9  */
  10
  11 #include <dt-bindings/dma/at91.h>
  12 #include <dt-bindings/pinctrl/at91.h>
  13 #include <dt-bindings/interrupt-controller/irq.h>
  14 #include <dt-bindings/gpio/gpio.h>
  15 #include <dt-bindings/clock/at91.h>
  16 #include <dt-bindings/mfd/at91-usart.h>
  17
  18 / {
  19         #address-cells = <1>;
  20         #size-cells = <1>;
  21         model = "Atmel AT91SAM9x5 family SoC";
  22         compatible = "atmel,at91sam9x5";
  23         interrupt-parent = <&aic>;
  24
  25         aliases {
  26                 serial0 = &dbgu;
  27                 serial1 = &usart0;
  28                 serial2 = &usart1;
  29                 serial3 = &usart2;
  30                 gpio0 = &pioA;
  31                 gpio1 = &pioB;
  32                 gpio2 = &pioC;
  33                 gpio3 = &pioD;
  34                 tcb0 = &tcb0;
  35                 tcb1 = &tcb1;
  36                 i2c0 = &i2c0;
  37                 i2c1 = &i2c1;
  38                 i2c2 = &i2c2;
  39                 ssc0 = &ssc0;
  40                 pwm0 = &pwm0;
  41         };
  42         cpus {
  43                 #address-cells = <1>;
  44                 #size-cells = <0>;
  45
  46                 cpu@0 {
  47                         compatible = "arm,arm926ej-s";
  48                         device_type = "cpu";
  49                         reg = <0>;
  50                 };
  51         };
  52
  53         memory@20000000 {
  54                 device_type = "memory";
  55                 reg = <0x20000000 0x10000000>;
  56         };
  57
  58         clocks {
  59                 slow_xtal: slow_xtal {
  60                         compatible = "fixed-clock";
  61                         #clock-cells = <0>;
  62                         clock-frequency = <0>;
  63                 };
  64
  65                 main_xtal: main_xtal {
  66                         compatible = "fixed-clock";
  67                         #clock-cells = <0>;
  68                         clock-frequency = <0>;
  69                 };
  70
  71                 adc_op_clk: adc_op_clk{
  72                         compatible = "fixed-clock";
  73                         #clock-cells = <0>;
  74                         clock-frequency = <1000000>;
  75                 };
  76         };
  77
  78         sram: sram@300000 {
  79                 compatible = "mmio-sram";
  80                 reg = <0x00300000 0x8000>;
  81                 #address-cells = <1>;
  82                 #size-cells = <1>;
  83                 ranges = <0 0x00300000 0x8000>;
  84         };
  85
  86         ahb {
  87                 compatible = "simple-bus";
  88                 #address-cells = <1>;
  89                 #size-cells = <1>;
  90                 ranges;
  91
  92                 apb {
  93                         compatible = "simple-bus";
  94                         #address-cells = <1>;
  95                         #size-cells = <1>;
  96                         ranges;
  97
  98                         aic: interrupt-controller@fffff000 {
  99                                 #interrupt-cells = <3>;
 100                                 compatible = "atmel,at91rm9200-aic";
 101                                 interrupt-controller;
 102                                 reg = <0xfffff000 0x200>;
 103                                 atmel,external-irqs = <31>;
 104                         };
 105
 106                         matrix: matrix@ffffde00 {
 107                                 compatible = "atmel,at91sam9x5-matrix", "syscon";
 108                                 reg = <0xffffde00 0x100>;
 109                         };
 110
 111                         pmecc: ecc-engine@ffffe000 {
 112                                 compatible = "atmel,at91sam9g45-pmecc";
 113                                 reg = <0xffffe000 0x600>,
 114                                       <0xffffe600 0x200>;
 115                         };
 116
 117                         ramc0: ramc@ffffe800 {
 118                                 compatible = "atmel,at91sam9g45-ddramc";
 119                                 reg = <0xffffe800 0x200>;
 120                                 clocks = <&pmc PMC_TYPE_SYSTEM 2>;
 121                                 clock-names = "ddrck";
 122                         };
 123
 124                         smc: smc@ffffea00 {
 125                                 compatible = "atmel,at91sam9260-smc", "syscon";
 126                                 reg = <0xffffea00 0x200>;
 127                         };
 128
 129                         pmc: pmc@fffffc00 {
 130                                 compatible = "atmel,at91sam9x5-pmc", "syscon";
 131                                 reg = <0xfffffc00 0x200>;
 132                                 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 133                                 #clock-cells = <2>;
 134                                 clocks = <&clk32k>, <&main_xtal>;
 135                                 clock-names = "slow_clk", "main_xtal";
 136                         };
 137
 138                         reset_controller: reset-controller@fffffe00 {
 139                                 compatible = "atmel,at91sam9g45-rstc";
 140                                 reg = <0xfffffe00 0x10>;
 141                                 clocks = <&clk32k>;
 142                         };
 143
 144                         shutdown_controller: shdwc@fffffe10 {
 145                                 compatible = "atmel,at91sam9x5-shdwc";
 146                                 reg = <0xfffffe10 0x10>;
 147                                 clocks = <&clk32k>;
 148                         };
 149
 150                         pit: timer@fffffe30 {
 151                                 compatible = "atmel,at91sam9260-pit";
 152                                 reg = <0xfffffe30 0xf>;
 153                                 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 154                                 clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
 155                         };
 156
 157                         clk32k: sckc@fffffe50 {
 158                                 compatible = "atmel,at91sam9x5-sckc";
 159                                 reg = <0xfffffe50 0x4>;
 160                                 clocks = <&slow_xtal>;
 161                                 #clock-cells = <0>;
 162                         };
 163
 164                         tcb0: timer@f8008000 {
 165                                 compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
 166                                 #address-cells = <1>;
 167                                 #size-cells = <0>;
 168                                 reg = <0xf8008000 0x100>;
 169                                 interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
 170                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k>;
 171                                 clock-names = "t0_clk", "slow_clk";
 172                         };
 173
 174                         tcb1: timer@f800c000 {
 175                                 compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
 176                                 #address-cells = <1>;
 177                                 #size-cells = <0>;
 178                                 reg = <0xf800c000 0x100>;
 179                                 interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
 180                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k>;
 181                                 clock-names = "t0_clk", "slow_clk";
 182                         };
 183
 184                         dma0: dma-controller@ffffec00 {
 185                                 compatible = "atmel,at91sam9g45-dma";
 186                                 reg = <0xffffec00 0x200>;
 187                                 interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
 188                                 #dma-cells = <2>;
 189                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
 190                                 clock-names = "dma_clk";
 191                         };
 192
 193                         dma1: dma-controller@ffffee00 {
 194                                 compatible = "atmel,at91sam9g45-dma";
 195                                 reg = <0xffffee00 0x200>;
 196                                 interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
 197                                 #dma-cells = <2>;
 198                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
 199                                 clock-names = "dma_clk";
 200                         };
 201
 202                         pinctrl: pinctrl@fffff400 {
 203                                 #address-cells = <1>;
 204                                 #size-cells = <1>;
 205                                 compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
 206                                 ranges = <0xfffff400 0xfffff400 0x800>;
 207
 208                                 /* shared pinctrl settings */
 209                                 dbgu {
 210                                         pinctrl_dbgu: dbgu-0 {
 211                                                 atmel,pins =
 212                                                         <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 213                                                          AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 214                                         };
 215                                 };
 216
 217                                 ebi {
 218                                         pinctrl_ebi_data_0_7: ebi-data-lsb-0 {
 219                                                 atmel,pins =
 220                                                         <AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE
 221                                                          AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE
 222                                                          AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_NONE
 223                                                          AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE
 224                                                          AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE
 225                                                          AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE
 226                                                          AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE
 227                                                          AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 228                                         };
 229
 230                                         pinctrl_ebi_data_8_15: ebi-data-msb-0 {
 231                                                 atmel,pins =
 232                                                         <AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE
 233                                                          AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE
 234                                                          AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE
 235                                                          AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE
 236                                                          AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE
 237                                                          AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE
 238                                                          AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE
 239                                                          AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 240                                         };
 241
 242                                         pinctrl_ebi_addr_nand: ebi-addr-0 {
 243                                                 atmel,pins =
 244                                                         <AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE
 245                                                          AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 246                                         };
 247                                 };
 248
 249                                 usart0 {
 250                                         pinctrl_usart0: usart0-0 {
 251                                                 atmel,pins =
 252                                                         <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE
 253                                                          AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 254                                         };
 255
 256                                         pinctrl_usart0_rts: usart0_rts-0 {
 257                                                 atmel,pins =
 258                                                         <AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PA2 periph A */
 259                                         };
 260
 261                                         pinctrl_usart0_cts: usart0_cts-0 {
 262                                                 atmel,pins =
 263                                                         <AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PA3 periph A */
 264                                         };
 265
 266                                         pinctrl_usart0_sck: usart0_sck-0 {
 267                                                 atmel,pins =
 268                                                         <AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PA4 periph A */
 269                                         };
 270                                 };
 271
 272                                 usart1 {
 273                                         pinctrl_usart1: usart1-0 {
 274                                                 atmel,pins =
 275                                                         <AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE
 276                                                          AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 277                                         };
 278
 279                                         pinctrl_usart1_rts: usart1_rts-0 {
 280                                                 atmel,pins =
 281                                                         <AT91_PIOC 27 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC27 periph C */
 282                                         };
 283
 284                                         pinctrl_usart1_cts: usart1_cts-0 {
 285                                                 atmel,pins =
 286                                                         <AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC28 periph C */
 287                                         };
 288
 289                                         pinctrl_usart1_sck: usart1_sck-0 {
 290                                                 atmel,pins =
 291                                                         <AT91_PIOC 29 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC29 periph C */
 292                                         };
 293                                 };
 294
 295                                 usart2 {
 296                                         pinctrl_usart2: usart2-0 {
 297                                                 atmel,pins =
 298                                                         <AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE
 299                                                          AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 300                                         };
 301
 302                                         pinctrl_usart2_rts: usart2_rts-0 {
 303                                                 atmel,pins =
 304                                                         <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;  /* PB0 periph B */
 305                                         };
 306
 307                                         pinctrl_usart2_cts: usart2_cts-0 {
 308                                                 atmel,pins =
 309                                                         <AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;  /* PB1 periph B */
 310                                         };
 311
 312                                         pinctrl_usart2_sck: usart2_sck-0 {
 313                                                 atmel,pins =
 314                                                         <AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;  /* PB2 periph B */
 315                                         };
 316                                 };
 317
 318                                 uart0 {
 319                                         pinctrl_uart0: uart0-0 {
 320                                                 atmel,pins =
 321                                                         <AT91_PIOC 8 AT91_PERIPH_C AT91_PINCTRL_NONE    /* PC8 periph C */
 322                                                          AT91_PIOC 9 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;       /* PC9 periph C with pullup */
 323                                         };
 324                                 };
 325
 326                                 uart1 {
 327                                         pinctrl_uart1: uart1-0 {
 328                                                 atmel,pins =
 329                                                         <AT91_PIOC 16 AT91_PERIPH_C AT91_PINCTRL_NONE   /* PC16 periph C */
 330                                                          AT91_PIOC 17 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;      /* PC17 periph C with pullup */
 331                                         };
 332                                 };
 333
 334                                 nand {
 335                                         pinctrl_nand_oe_we: nand-oe-we-0 {
 336                                                 atmel,pins =
 337                                                         <AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE
 338                                                          AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 339                                         };
 340
 341                                         pinctrl_nand_rb: nand-rb-0 {
 342                                                 atmel,pins =
 343                                                         <AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
 344                                         };
 345
 346                                         pinctrl_nand_cs: nand-cs-0 {
 347                                                 atmel,pins =
 348                                                         <AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
 349                                         };
 350                                 };
 351
 352                                 mmc0 {
 353                                         pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
 354                                                 atmel,pins =
 355                                                         <AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA17 periph A */
 356                                                          AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PA16 periph A with pullup */
 357                                                          AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;      /* PA15 periph A with pullup */
 358                                         };
 359
 360                                         pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
 361                                                 atmel,pins =
 362                                                         <AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PA18 periph A with pullup */
 363                                                          AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PA19 periph A with pullup */
 364                                                          AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;      /* PA20 periph A with pullup */
 365                                         };
 366                                 };
 367
 368                                 mmc1 {
 369                                         pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 {
 370                                                 atmel,pins =
 371                                                         <AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA13 periph B */
 372                                                          AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP        /* PA12 periph B with pullup */
 373                                                          AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;      /* PA11 periph B with pullup */
 374                                         };
 375
 376                                         pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 {
 377                                                 atmel,pins =
 378                                                         <AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA2 periph B with pullup */
 379                                                          AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA3 periph B with pullup */
 380                                                          AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;       /* PA4 periph B with pullup */
 381                                         };
 382                                 };
 383
 384                                 ssc0 {
 385                                         pinctrl_ssc0_tx: ssc0_tx-0 {
 386                                                 atmel,pins =
 387                                                         <AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA24 periph B */
 388                                                          AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA25 periph B */
 389                                                          AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA26 periph B */
 390                                         };
 391
 392                                         pinctrl_ssc0_rx: ssc0_rx-0 {
 393                                                 atmel,pins =
 394                                                         <AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA27 periph B */
 395                                                          AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA28 periph B */
 396                                                          AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA29 periph B */
 397                                         };
 398                                 };
 399
 400                                 spi0 {
 401                                         pinctrl_spi0: spi0-0 {
 402                                                 atmel,pins =
 403                                                         <AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA11 periph A SPI0_MISO pin */
 404                                                          AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA12 periph A SPI0_MOSI pin */
 405                                                          AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA13 periph A SPI0_SPCK pin */
 406                                         };
 407                                 };
 408
 409                                 spi1 {
 410                                         pinctrl_spi1: spi1-0 {
 411                                                 atmel,pins =
 412                                                         <AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA21 periph B SPI1_MISO pin */
 413                                                          AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA22 periph B SPI1_MOSI pin */
 414                                                          AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA23 periph B SPI1_SPCK pin */
 415                                         };
 416                                 };
 417
 418                                 i2c0 {
 419                                         pinctrl_i2c0: i2c0-0 {
 420                                                 atmel,pins =
 421                                                         <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA30 periph A I2C0 data */
 422                                                          AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA31 periph A I2C0 clock */
 423                                         };
 424                                 };
 425
 426                                 i2c1 {
 427                                         pinctrl_i2c1: i2c1-0 {
 428                                                 atmel,pins =
 429                                                         <AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE    /* PC0 periph C I2C1 data */
 430                                                          AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>;  /* PC1 periph C I2C1 clock */
 431                                         };
 432                                 };
 433
 434                                 i2c2 {
 435                                         pinctrl_i2c2: i2c2-0 {
 436                                                 atmel,pins =
 437                                                         <AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE    /* PB4 periph B I2C2 data */
 438                                                          AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;  /* PB5 periph B I2C2 clock */
 439                                         };
 440                                 };
 441
 442                                 i2c_gpio0 {
 443                                         pinctrl_i2c_gpio0: i2c_gpio0-0 {
 444                                                 atmel,pins =
 445                                                         <AT91_PIOA 30 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE /* PA30 gpio multidrive I2C0 data */
 446                                                          AT91_PIOA 31 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;       /* PA31 gpio multidrive I2C0 clock */
 447                                         };
 448                                 };
 449
 450                                 i2c_gpio1 {
 451                                         pinctrl_i2c_gpio1: i2c_gpio1-0 {
 452                                                 atmel,pins =
 453                                                         <AT91_PIOC 0 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE  /* PC0 gpio multidrive I2C1 data */
 454                                                          AT91_PIOC 1 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;        /* PC1 gpio multidrive I2C1 clock */
 455                                         };
 456                                 };
 457
 458                                 i2c_gpio2 {
 459                                         pinctrl_i2c_gpio2: i2c_gpio2-0 {
 460                                                 atmel,pins =
 461                                                         <AT91_PIOB 4 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE  /* PB4 gpio multidrive I2C2 data */
 462                                                          AT91_PIOB 5 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;        /* PB5 gpio multidrive I2C2 clock */
 463                                         };
 464                                 };
 465
 466                                 pwm0 {
 467                                         pinctrl_pwm0_pwm0_0: pwm0_pwm0-0 {
 468                                                 atmel,pins =
 469                                                         <AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 470                                         };
 471                                         pinctrl_pwm0_pwm0_1: pwm0_pwm0-1 {
 472                                                 atmel,pins =
 473                                                         <AT91_PIOC 10 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 474                                         };
 475                                         pinctrl_pwm0_pwm0_2: pwm0_pwm0-2 {
 476                                                 atmel,pins =
 477                                                         <AT91_PIOC 18 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 478                                         };
 479
 480                                         pinctrl_pwm0_pwm1_0: pwm0_pwm1-0 {
 481                                                 atmel,pins =
 482                                                         <AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 483                                         };
 484                                         pinctrl_pwm0_pwm1_1: pwm0_pwm1-1 {
 485                                                 atmel,pins =
 486                                                         <AT91_PIOC 11 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 487                                         };
 488                                         pinctrl_pwm0_pwm1_2: pwm0_pwm1-2 {
 489                                                 atmel,pins =
 490                                                         <AT91_PIOC 19 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 491                                         };
 492
 493                                         pinctrl_pwm0_pwm2_0: pwm0_pwm2-0 {
 494                                                 atmel,pins =
 495                                                         <AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 496                                         };
 497                                         pinctrl_pwm0_pwm2_1: pwm0_pwm2-1 {
 498                                                 atmel,pins =
 499                                                         <AT91_PIOC 20 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 500                                         };
 501
 502                                         pinctrl_pwm0_pwm3_0: pwm0_pwm3-0 {
 503                                                 atmel,pins =
 504                                                         <AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 505                                         };
 506                                         pinctrl_pwm0_pwm3_1: pwm0_pwm3-1 {
 507                                                 atmel,pins =
 508                                                         <AT91_PIOC 21 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 509                                         };
 510                                 };
 511
 512                                 tcb0 {
 513                                         pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
 514                                                 atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 515                                         };
 516
 517                                         pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
 518                                                 atmel,pins = <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 519                                         };
 520
 521                                         pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
 522                                                 atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 523                                         };
 524
 525                                         pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
 526                                                 atmel,pins = <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 527                                         };
 528
 529                                         pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
 530                                                 atmel,pins = <AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 531                                         };
 532
 533                                         pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
 534                                                 atmel,pins = <AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 535                                         };
 536
 537                                         pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
 538                                                 atmel,pins = <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 539                                         };
 540
 541                                         pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
 542                                                 atmel,pins = <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 543                                         };
 544
 545                                         pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
 546                                                 atmel,pins = <AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 547                                         };
 548                                 };
 549
 550                                 tcb1 {
 551                                         pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
 552                                                 atmel,pins = <AT91_PIOC 4 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 553                                         };
 554
 555                                         pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
 556                                                 atmel,pins = <AT91_PIOC 7 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 557                                         };
 558
 559                                         pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
 560                                                 atmel,pins = <AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 561                                         };
 562
 563                                         pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
 564                                                 atmel,pins = <AT91_PIOC 2 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 565                                         };
 566
 567                                         pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
 568                                                 atmel,pins = <AT91_PIOC 5 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 569                                         };
 570
 571                                         pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
 572                                                 atmel,pins = <AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 573                                         };
 574
 575                                         pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
 576                                                 atmel,pins = <AT91_PIOC 3 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 577                                         };
 578
 579                                         pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
 580                                                 atmel,pins = <AT91_PIOC 6 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 581                                         };
 582
 583                                         pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
 584                                                 atmel,pins = <AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 585                                         };
 586                                 };
 587
 588                                 pioA: gpio@fffff400 {
 589                                         compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 590                                         reg = <0xfffff400 0x200>;
 591                                         interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
 592                                         #gpio-cells = <2>;
 593                                         gpio-controller;
 594                                         interrupt-controller;
 595                                         #interrupt-cells = <2>;
 596                                         clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
 597                                 };
 598
 599                                 pioB: gpio@fffff600 {
 600                                         compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 601                                         reg = <0xfffff600 0x200>;
 602                                         interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
 603                                         #gpio-cells = <2>;
 604                                         gpio-controller;
 605                                         #gpio-lines = <19>;
 606                                         interrupt-controller;
 607                                         #interrupt-cells = <2>;
 608                                         clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
 609                                 };
 610
 611                                 pioC: gpio@fffff800 {
 612                                         compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 613                                         reg = <0xfffff800 0x200>;
 614                                         interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
 615                                         #gpio-cells = <2>;
 616                                         gpio-controller;
 617                                         interrupt-controller;
 618                                         #interrupt-cells = <2>;
 619                                         clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
 620                                 };
 621
 622                                 pioD: gpio@fffffa00 {
 623                                         compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 624                                         reg = <0xfffffa00 0x200>;
 625                                         interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
 626                                         #gpio-cells = <2>;
 627                                         gpio-controller;
 628                                         #gpio-lines = <22>;
 629                                         interrupt-controller;
 630                                         #interrupt-cells = <2>;
 631                                         clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
 632                                 };
 633                         };
 634
 635                         ssc0: ssc@f0010000 {
 636                                 compatible = "atmel,at91sam9g45-ssc";
 637                                 reg = <0xf0010000 0x4000>;
 638                                 interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
 639                                 dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(13)>,
 640                                        <&dma0 1 AT91_DMA_CFG_PER_ID(14)>;
 641                                 dma-names = "tx", "rx";
 642                                 pinctrl-names = "default";
 643                                 pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
 644                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
 645                                 clock-names = "pclk";
 646                                 status = "disabled";
 647                         };
 648
 649                         mmc0: mmc@f0008000 {
 650                                 compatible = "atmel,hsmci";
 651                                 reg = <0xf0008000 0x600>;
 652                                 interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
 653                                 dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(0)>;
 654                                 dma-names = "rxtx";
 655                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
 656                                 clock-names = "mci_clk";
 657                                 #address-cells = <1>;
 658                                 #size-cells = <0>;
 659                                 status = "disabled";
 660                         };
 661
 662                         mmc1: mmc@f000c000 {
 663                                 compatible = "atmel,hsmci";
 664                                 reg = <0xf000c000 0x600>;
 665                                 interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
 666                                 dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(0)>;
 667                                 dma-names = "rxtx";
 668                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 26>;
 669                                 clock-names = "mci_clk";
 670                                 #address-cells = <1>;
 671                                 #size-cells = <0>;
 672                                 status = "disabled";
 673                         };
 674
 675                         dbgu: serial@fffff200 {
 676                                 compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 677                                 reg = <0xfffff200 0x200>;
 678                                 atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 679                                 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 680                                 pinctrl-names = "default";
 681                                 pinctrl-0 = <&pinctrl_dbgu>;
 682                                 dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(8)>,
 683                                        <&dma1 1 (AT91_DMA_CFG_PER_ID(9) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
 684                                 dma-names = "tx", "rx";
 685                                 clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
 686                                 clock-names = "usart";
 687                                 status = "disabled";
 688                         };
 689
 690                         usart0: serial@f801c000 {
 691                                 compatible = "atmel,at91sam9260-usart";
 692                                 reg = <0xf801c000 0x200>;
 693                                 atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 694                                 interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>;
 695                                 pinctrl-names = "default";
 696                                 pinctrl-0 = <&pinctrl_usart0>;
 697                                 dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(3)>,
 698                                        <&dma0 1 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
 699                                 dma-names = "tx", "rx";
 700                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
 701                                 clock-names = "usart";
 702                                 status = "disabled";
 703                         };
 704
 705                         usart1: serial@f8020000 {
 706                                 compatible = "atmel,at91sam9260-usart";
 707                                 reg = <0xf8020000 0x200>;
 708                                 atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 709                                 interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
 710                                 pinctrl-names = "default";
 711                                 pinctrl-0 = <&pinctrl_usart1>;
 712                                 dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(5)>,
 713                                        <&dma0 1 (AT91_DMA_CFG_PER_ID(6) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
 714                                 dma-names = "tx", "rx";
 715                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
 716                                 clock-names = "usart";
 717                                 status = "disabled";
 718                         };
 719
 720                         usart2: serial@f8024000 {
 721                                 compatible = "atmel,at91sam9260-usart";
 722                                 reg = <0xf8024000 0x200>;
 723                                 atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 724                                 interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 725                                 pinctrl-names = "default";
 726                                 pinctrl-0 = <&pinctrl_usart2>;
 727                                 dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(12)>,
 728                                        <&dma1 1 (AT91_DMA_CFG_PER_ID(13) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
 729                                 dma-names = "tx", "rx";
 730                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
 731                                 clock-names = "usart";
 732                                 status = "disabled";
 733                         };
 734
 735                         i2c0: i2c@f8010000 {
 736                                 compatible = "atmel,at91sam9x5-i2c";
 737                                 reg = <0xf8010000 0x100>;
 738                                 interrupts = <9 IRQ_TYPE_LEVEL_HIGH 6>;
 739                                 dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(7)>,
 740                                        <&dma0 1 AT91_DMA_CFG_PER_ID(8)>;
 741                                 dma-names = "tx", "rx";
 742                                 #address-cells = <1>;
 743                                 #size-cells = <0>;
 744                                 pinctrl-names = "default";
 745                                 pinctrl-0 = <&pinctrl_i2c0>;
 746                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
 747                                 status = "disabled";
 748                         };
 749
 750                         i2c1: i2c@f8014000 {
 751                                 compatible = "atmel,at91sam9x5-i2c";
 752                                 reg = <0xf8014000 0x100>;
 753                                 interrupts = <10 IRQ_TYPE_LEVEL_HIGH 6>;
 754                                 dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(5)>,
 755                                        <&dma1 1 AT91_DMA_CFG_PER_ID(6)>;
 756                                 dma-names = "tx", "rx";
 757                                 #address-cells = <1>;
 758                                 #size-cells = <0>;
 759                                 pinctrl-names = "default";
 760                                 pinctrl-0 = <&pinctrl_i2c1>;
 761                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
 762                                 status = "disabled";
 763                         };
 764
 765                         i2c2: i2c@f8018000 {
 766                                 compatible = "atmel,at91sam9x5-i2c";
 767                                 reg = <0xf8018000 0x100>;
 768                                 interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
 769                                 dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(9)>,
 770                                        <&dma0 1 AT91_DMA_CFG_PER_ID(10)>;
 771                                 dma-names = "tx", "rx";
 772                                 #address-cells = <1>;
 773                                 #size-cells = <0>;
 774                                 pinctrl-names = "default";
 775                                 pinctrl-0 = <&pinctrl_i2c2>;
 776                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
 777                                 status = "disabled";
 778                         };
 779
 780                         uart0: serial@f8040000 {
 781                                 compatible = "atmel,at91sam9260-usart";
 782                                 reg = <0xf8040000 0x200>;
 783                                 atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 784                                 interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
 785                                 pinctrl-names = "default";
 786                                 pinctrl-0 = <&pinctrl_uart0>;
 787                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
 788                                 clock-names = "usart";
 789                                 status = "disabled";
 790                         };
 791
 792                         uart1: serial@f8044000 {
 793                                 compatible = "atmel,at91sam9260-usart";
 794                                 reg = <0xf8044000 0x200>;
 795                                 atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 796                                 interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
 797                                 pinctrl-names = "default";
 798                                 pinctrl-0 = <&pinctrl_uart1>;
 799                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
 800                                 clock-names = "usart";
 801                                 status = "disabled";
 802                         };
 803
 804                         adc0: adc@f804c000 {
 805                                 compatible = "atmel,at91sam9x5-adc";
 806                                 reg = <0xf804c000 0x100>;
 807                                 interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>;
 808                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 19>,
 809                                          <&adc_op_clk>;
 810                                 clock-names = "adc_clk", "adc_op_clk";
 811                                 atmel,adc-use-external-triggers;
 812                                 atmel,adc-channels-used = <0xffff>;
 813                                 atmel,adc-vref = <3300>;
 814                                 atmel,adc-startup-time = <40>;
 815                                 atmel,adc-sample-hold-time = <11>;
 816                         };
 817
 818                         spi0: spi@f0000000 {
 819                                 #address-cells = <1>;
 820                                 #size-cells = <0>;
 821                                 compatible = "atmel,at91rm9200-spi";
 822                                 reg = <0xf0000000 0x100>;
 823                                 interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
 824                                 dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(1)>,
 825                                        <&dma0 1 AT91_DMA_CFG_PER_ID(2)>;
 826                                 dma-names = "tx", "rx";
 827                                 pinctrl-names = "default";
 828                                 pinctrl-0 = <&pinctrl_spi0>;
 829                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
 830                                 clock-names = "spi_clk";
 831                                 status = "disabled";
 832                         };
 833
 834                         spi1: spi@f0004000 {
 835                                 #address-cells = <1>;
 836                                 #size-cells = <0>;
 837                                 compatible = "atmel,at91rm9200-spi";
 838                                 reg = <0xf0004000 0x100>;
 839                                 interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>;
 840                                 dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(1)>,
 841                                        <&dma1 1 AT91_DMA_CFG_PER_ID(2)>;
 842                                 dma-names = "tx", "rx";
 843                                 pinctrl-names = "default";
 844                                 pinctrl-0 = <&pinctrl_spi1>;
 845                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
 846                                 clock-names = "spi_clk";
 847                                 status = "disabled";
 848                         };
 849
 850                         usb2: gadget@f803c000 {
 851                                 compatible = "atmel,at91sam9g45-udc";
 852                                 reg = <0x00500000 0x80000
 853                                        0xf803c000 0x400>;
 854                                 interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
 855                                 clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 23>;
 856                                 clock-names = "hclk", "pclk";
 857                                 status = "disabled";
 858                         };
 859
 860                         watchdog: watchdog@fffffe40 {
 861                                 compatible = "atmel,at91sam9260-wdt";
 862                                 reg = <0xfffffe40 0x10>;
 863                                 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 864                                 clocks = <&clk32k>;
 865                                 atmel,watchdog-type = "hardware";
 866                                 atmel,reset-type = "all";
 867                                 atmel,dbg-halt;
 868                                 status = "disabled";
 869                         };
 870
 871                         rtc: rtc@fffffeb0 {
 872                                 compatible = "atmel,at91sam9x5-rtc";
 873                                 reg = <0xfffffeb0 0x40>;
 874                                 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 875                                 clocks = <&clk32k>;
 876                                 status = "disabled";
 877                         };
 878
 879                         pwm0: pwm@f8034000 {
 880                                 compatible = "atmel,at91sam9rl-pwm";
 881                                 reg = <0xf8034000 0x300>;
 882                                 interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
 883                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
 884                                 #pwm-cells = <3>;
 885                                 status = "disabled";
 886                         };
 887                 };
 888
 889                 usb0: ohci@600000 {
 890                         compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 891                         reg = <0x00600000 0x100000>;
 892                         interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
 893                         clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>;
 894                         clock-names = "ohci_clk", "hclk", "uhpck";
 895                         status = "disabled";
 896                 };
 897
 898                 usb1: ehci@700000 {
 899                         compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 900                         reg = <0x00700000 0x100000>;
 901                         interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
 902                         clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 22>;
 903                         clock-names = "usb_clk", "ehci_clk";
 904                         status = "disabled";
 905                 };
 906
 907                 ebi: ebi@10000000 {
 908                         compatible = "atmel,at91sam9x5-ebi";
 909                         #address-cells = <2>;
 910                         #size-cells = <1>;
 911                         atmel,smc = <&smc>;
 912                         atmel,matrix = <&matrix>;
 913                         reg = <0x10000000 0x60000000>;
 914                         ranges = <0x0 0x0 0x10000000 0x10000000
 915                                   0x1 0x0 0x20000000 0x10000000
 916                                   0x2 0x0 0x30000000 0x10000000
 917                                   0x3 0x0 0x40000000 0x10000000
 918                                   0x4 0x0 0x50000000 0x10000000
 919                                   0x5 0x0 0x60000000 0x10000000>;
 920                         clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
 921                         status = "disabled";
 922
 923                         nand_controller: nand-controller {
 924                                 compatible = "atmel,at91sam9g45-nand-controller";
 925                                 ecc-engine = <&pmecc>;
 926                                 #address-cells = <2>;
 927                                 #size-cells = <1>;
 928                                 ranges;
 929                                 status = "disabled";
 930                         };
 931                 };
 932         };
 933
 934         i2c-gpio-0 {
 935                 compatible = "i2c-gpio";
 936                 gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */
 937                          &pioA 31 GPIO_ACTIVE_HIGH /* scl */
 938                         >;
 939                 i2c-gpio,sda-open-drain;
 940                 i2c-gpio,scl-open-drain;
 941                 i2c-gpio,delay-us = <2>;        /* ~100 kHz */
 942                 #address-cells = <1>;
 943                 #size-cells = <0>;
 944                 pinctrl-names = "default";
 945                 pinctrl-0 = <&pinctrl_i2c_gpio0>;
 946                 status = "disabled";
 947         };
 948
 949         i2c-gpio-1 {
 950                 compatible = "i2c-gpio";
 951                 gpios = <&pioC 0 GPIO_ACTIVE_HIGH /* sda */
 952                          &pioC 1 GPIO_ACTIVE_HIGH /* scl */
 953                         >;
 954                 i2c-gpio,sda-open-drain;
 955                 i2c-gpio,scl-open-drain;
 956                 i2c-gpio,delay-us = <2>;        /* ~100 kHz */
 957                 #address-cells = <1>;
 958                 #size-cells = <0>;
 959                 pinctrl-names = "default";
 960                 pinctrl-0 = <&pinctrl_i2c_gpio1>;
 961                 status = "disabled";
 962         };
 963
 964         i2c-gpio-2 {
 965                 compatible = "i2c-gpio";
 966                 gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */
 967                          &pioB 5 GPIO_ACTIVE_HIGH /* scl */
 968                         >;
 969                 i2c-gpio,sda-open-drain;
 970                 i2c-gpio,scl-open-drain;
 971                 i2c-gpio,delay-us = <2>;        /* ~100 kHz */
 972                 #address-cells = <1>;
 973                 #size-cells = <0>;
 974                 pinctrl-names = "default";
 975                 pinctrl-0 = <&pinctrl_i2c_gpio2>;
 976                 status = "disabled";
 977         };
 978 };