arch/arm/boot/dts/at91-sama7g5ek.dts

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  *  at91-sama7g5ek.dts - Device Tree file for SAMA7G5-EK board
   4  *
   5  *  Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries
   6  *
   7  *  Author: Eugen Hristev <eugen.hristev@microchip.com>
   8  *  Author: Claudiu Beznea <claudiu.beznea@microchip.com>
   9  *
  10  */
  11 /dts-v1/;
  12 #include "sama7g5-pinfunc.h"
  13 #include "sama7g5.dtsi"
  14 #include <dt-bindings/mfd/atmel-flexcom.h>
  15 #include <dt-bindings/input/input.h>
  16
  17 / {
  18         model = "Microchip SAMA7G5-EK";
  19         compatible = "microchip,sama7g5ek", "microchip,sama7g5", "microchip,sama7";
  20
  21         chosen {
  22                 bootargs = "rw root=/dev/mmcblk1p2 rootfstype=ext4 rootwait";
  23                 stdout-path = "serial0:115200n8";
  24         };
  25
  26         aliases {
  27                 serial0 = &uart3;
  28                 serial1 = &uart4;
  29                 serial2 = &uart7;
  30                 serial3 = &uart0;
  31                 i2c0 = &i2c1;
  32                 i2c1 = &i2c8;
  33                 i2c2 = &i2c9;
  34         };
  35
  36         clocks {
  37                 slow_xtal {
  38                         clock-frequency = <32768>;
  39                 };
  40
  41                 main_xtal {
  42                         clock-frequency = <24000000>;
  43                 };
  44         };
  45
  46         gpio_keys {
  47                 compatible = "gpio-keys";
  48
  49                 pinctrl-names = "default";
  50                 pinctrl-0 = <&pinctrl_key_gpio_default>;
  51
  52                 bp1 {
  53                         label = "PB_USER";
  54                         gpios = <&pioA PIN_PA12 GPIO_ACTIVE_LOW>;
  55                         linux,code = <KEY_PROG1>;
  56                         wakeup-source;
  57                 };
  58         };
  59
  60         leds {
  61                 compatible = "gpio-leds";
  62                 pinctrl-names = "default";
  63                 pinctrl-0 = <&pinctrl_led_gpio_default>;
  64                 status = "okay"; /* Conflict with pwm. */
  65
  66                 red_led {
  67                         label = "red";
  68                         gpios = <&pioA PIN_PB8 GPIO_ACTIVE_HIGH>;
  69                 };
  70
  71                 green_led {
  72                         label = "green";
  73                         gpios = <&pioA PIN_PA13 GPIO_ACTIVE_HIGH>;
  74                 };
  75
  76                 blue_led {
  77                         label = "blue";
  78                         gpios = <&pioA PIN_PD20 GPIO_ACTIVE_HIGH>;
  79                         linux,default-trigger = "heartbeat";
  80                 };
  81         };
  82
  83         /* 512 M */
  84         memory@60000000 {
  85                 device_type = "memory";
  86                 reg = <0x60000000 0x20000000>;
  87         };
  88
  89         sound: sound {
  90                 compatible = "simple-audio-card";
  91                 simple-audio-card,name = "sama7g5ek audio";
  92                 #address-cells = <1>;
  93                 #size-cells = <0>;
  94                 simple-audio-card,dai-link@0 {
  95                         reg = <0>;
  96                         cpu {
  97                                 sound-dai = <&spdiftx>;
  98                         };
  99                         codec {
 100                                 sound-dai = <&spdif_out>;
 101                         };
 102                 };
 103                 simple-audio-card,dai-link@1 {
 104                         reg = <1>;
 105                         cpu {
 106                                 sound-dai = <&spdifrx>;
 107                         };
 108                         codec {
 109                                 sound-dai = <&spdif_in>;
 110                         };
 111                 };
 112         };
 113
 114         spdif_in: spdif-in {
 115                 #sound-dai-cells = <0>;
 116                 compatible = "linux,spdif-dir";
 117         };
 118
 119         spdif_out: spdif-out {
 120                 #sound-dai-cells = <0>;
 121                 compatible = "linux,spdif-dit";
 122         };
 123 };
 124
 125 &cpu0 {
 126         cpu-supply = <&vddcpu>;
 127 };
 128
 129 &dma0 {
 130         status = "okay";
 131 };
 132
 133 &dma1 {
 134         status = "okay";
 135 };
 136
 137 &dma2 {
 138         status = "okay";
 139 };
 140
 141 &flx0 {
 142         atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
 143         status = "disabled";
 144
 145         uart0: serial@200 {
 146                 pinctrl-names = "default";
 147                 pinctrl-0 = <&pinctrl_flx0_default>;
 148                 status = "disabled";
 149         };
 150 };
 151
 152 &flx1 {
 153         atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
 154         status = "okay";
 155
 156         i2c1: i2c@600 {
 157                 pinctrl-names = "default";
 158                 pinctrl-0 = <&pinctrl_i2c1_default>;
 159                 i2c-analog-filter;
 160                 i2c-digital-filter;
 161                 i2c-digital-filter-width-ns = <35>;
 162                 status = "okay";
 163
 164                 mcp16502@5b {
 165                         compatible = "microchip,mcp16502";
 166                         reg = <0x5b>;
 167                         status = "okay";
 168
 169                         regulators {
 170                                 vdd_3v3: VDD_IO {
 171                                         regulator-name = "VDD_IO";
 172                                         regulator-min-microvolt = <1200000>;
 173                                         regulator-max-microvolt = <3700000>;
 174                                         regulator-initial-mode = <2>;
 175                                         regulator-allowed-modes = <2>, <4>;
 176                                         regulator-always-on;
 177
 178                                         regulator-state-standby {
 179                                                 regulator-on-in-suspend;
 180                                                 regulator-mode = <4>;
 181                                         };
 182
 183                                         regulator-state-mem {
 184                                                 regulator-off-in-suspend;
 185                                                 regulator-mode = <4>;
 186                                         };
 187                                 };
 188
 189                                 vddioddr: VDD_DDR {
 190                                         regulator-name = "VDD_DDR";
 191                                         regulator-min-microvolt = <1300000>;
 192                                         regulator-max-microvolt = <1450000>;
 193                                         regulator-initial-mode = <2>;
 194                                         regulator-allowed-modes = <2>, <4>;
 195                                         regulator-always-on;
 196
 197                                         regulator-state-standby {
 198                                                 regulator-on-in-suspend;
 199                                                 regulator-suspend-microvolt = <1350000>;
 200                                                 regulator-mode = <4>;
 201                                         };
 202
 203                                         regulator-state-mem {
 204                                                 regulator-on-in-suspend;
 205                                                 regulator-suspend-microvolt = <1350000>;
 206                                                 regulator-mode = <4>;
 207                                         };
 208                                 };
 209
 210                                 vddcore: VDD_CORE {
 211                                         regulator-name = "VDD_CORE";
 212                                         regulator-min-microvolt = <1100000>;
 213                                         regulator-max-microvolt = <1850000>;
 214                                         regulator-initial-mode = <2>;
 215                                         regulator-allowed-modes = <2>, <4>;
 216                                         regulator-always-on;
 217
 218                                         regulator-state-standby {
 219                                                 regulator-on-in-suspend;
 220                                                 regulator-mode = <4>;
 221                                         };
 222
 223                                         regulator-state-mem {
 224                                                 regulator-off-in-suspend;
 225                                                 regulator-mode = <4>;
 226                                         };
 227                                 };
 228
 229                                 vddcpu: VDD_OTHER {
 230                                         regulator-name = "VDD_OTHER";
 231                                         regulator-min-microvolt = <1125000>;
 232                                         regulator-max-microvolt = <1850000>;
 233                                         regulator-initial-mode = <2>;
 234                                         regulator-allowed-modes = <2>, <4>;
 235                                         regulator-ramp-delay = <3125>;
 236                                         regulator-always-on;
 237
 238                                         regulator-state-standby {
 239                                                 regulator-on-in-suspend;
 240                                                 regulator-mode = <4>;
 241                                         };
 242
 243                                         regulator-state-mem {
 244                                                 regulator-off-in-suspend;
 245                                                 regulator-mode = <4>;
 246                                         };
 247                                 };
 248
 249                                 vldo1: LDO1 {
 250                                         regulator-name = "LDO1";
 251                                         regulator-min-microvolt = <1200000>;
 252                                         regulator-max-microvolt = <3700000>;
 253                                         regulator-always-on;
 254
 255                                         regulator-state-standby {
 256                                                 regulator-on-in-suspend;
 257                                         };
 258
 259                                         regulator-state-mem {
 260                                                 regulator-off-in-suspend;
 261                                         };
 262                                 };
 263
 264                                 vldo2: LDO2 {
 265                                         regulator-name = "LDO2";
 266                                         regulator-min-microvolt = <1200000>;
 267                                         regulator-max-microvolt = <3700000>;
 268
 269                                         regulator-state-standby {
 270                                                 regulator-on-in-suspend;
 271                                         };
 272
 273                                         regulator-state-mem {
 274                                                 regulator-off-in-suspend;
 275                                         };
 276                                 };
 277                         };
 278                 };
 279         };
 280 };
 281
 282 &flx3 {
 283         atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
 284         status = "okay";
 285
 286         uart3: serial@200 {
 287                 pinctrl-names = "default";
 288                 pinctrl-0 = <&pinctrl_flx3_default>;
 289                 status = "okay";
 290         };
 291 };
 292
 293 &flx4 {
 294         atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
 295         status = "okay";
 296
 297         uart4: serial@200 {
 298                 pinctrl-names = "default";
 299                 pinctrl-0 = <&pinctrl_flx4_default>;
 300                 status = "okay";
 301         };
 302 };
 303
 304 &flx7 {
 305         atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
 306         status = "okay";
 307
 308         uart7: serial@200 {
 309                 pinctrl-names = "default";
 310                 pinctrl-0 = <&pinctrl_flx7_default>;
 311                 status = "okay";
 312         };
 313 };
 314
 315 &flx8 {
 316         atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
 317         status = "okay";
 318
 319         i2c8: i2c@600 {
 320                 pinctrl-names = "default";
 321                 pinctrl-0 = <&pinctrl_i2c8_default>;
 322                 i2c-analog-filter;
 323                 i2c-digital-filter;
 324                 i2c-digital-filter-width-ns = <35>;
 325                 status = "okay";
 326         };
 327 };
 328
 329 &flx9 {
 330         atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
 331         status = "okay";
 332
 333         i2c9: i2c@600 {
 334                 pinctrl-names = "default";
 335                 pinctrl-0 = <&pinctrl_i2c9_default>;
 336                 i2c-analog-filter;
 337                 i2c-digital-filter;
 338                 i2c-digital-filter-width-ns = <35>;
 339                 status = "okay";
 340         };
 341 };
 342
 343 &flx11 {
 344         atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
 345         status = "okay";
 346
 347         spi11: spi@400 {
 348                 pinctrl-names = "default";
 349                 pinctrl-0 = <&pinctrl_mikrobus1_spi &pinctrl_mikrobus1_spi_cs>;
 350                 status = "okay";
 351         };
 352 };
 353
 354 &gmac0 {
 355         #address-cells = <1>;
 356         #size-cells = <0>;
 357         pinctrl-names = "default";
 358         pinctrl-0 = <&pinctrl_gmac0_default
 359                      &pinctrl_gmac0_mdio_default
 360                      &pinctrl_gmac0_txck_default
 361                      &pinctrl_gmac0_phy_irq>;
 362         phy-mode = "rgmii-id";
 363         status = "okay";
 364
 365         ethernet-phy@7 {
 366                 reg = <0x7>;
 367                 interrupt-parent = <&pioA>;
 368                 interrupts = <PIN_PA31 IRQ_TYPE_LEVEL_LOW>;
 369         };
 370 };
 371
 372 &gmac1 {
 373         #address-cells = <1>;
 374         #size-cells = <0>;
 375         pinctrl-names = "default";
 376         pinctrl-0 = <&pinctrl_gmac1_default
 377                      &pinctrl_gmac1_mdio_default
 378                      &pinctrl_gmac1_phy_irq>;
 379         phy-mode = "rmii";
 380         status = "okay";
 381
 382         ethernet-phy@0 {
 383                 reg = <0x0>;
 384                 interrupt-parent = <&pioA>;
 385                 interrupts = <PIN_PA21 IRQ_TYPE_LEVEL_LOW>;
 386         };
 387 };
 388
 389 &i2s0 {
 390         pinctrl-names = "default";
 391         pinctrl-0 = <&pinctrl_i2s0_default>;
 392 };
 393
 394 &pioA {
 395         pinctrl_flx0_default: flx0_default {
 396                 pinmux = <PIN_PE3__FLEXCOM0_IO0>,
 397                          <PIN_PE4__FLEXCOM0_IO1>,
 398                          <PIN_PE6__FLEXCOM0_IO3>,
 399                          <PIN_PE7__FLEXCOM0_IO4>;
 400                 bias-disable;
 401         };
 402
 403         pinctrl_flx3_default: flx3_default {
 404                 pinmux = <PIN_PD16__FLEXCOM3_IO0>,
 405                          <PIN_PD17__FLEXCOM3_IO1>;
 406                 bias-disable;
 407         };
 408
 409         pinctrl_flx4_default: flx4_default {
 410                 pinmux = <PIN_PD18__FLEXCOM4_IO0>,
 411                          <PIN_PD19__FLEXCOM4_IO1>;
 412                 bias-disable;
 413         };
 414
 415         pinctrl_flx7_default: flx7_default {
 416                 pinmux = <PIN_PC23__FLEXCOM7_IO0>,
 417                          <PIN_PC24__FLEXCOM7_IO1>;
 418                 bias-disable;
 419         };
 420
 421         pinctrl_gmac0_default: gmac0_default {
 422                 pinmux = <PIN_PA16__G0_TX0>,
 423                          <PIN_PA17__G0_TX1>,
 424                          <PIN_PA26__G0_TX2>,
 425                          <PIN_PA27__G0_TX3>,
 426                          <PIN_PA19__G0_RX0>,
 427                          <PIN_PA20__G0_RX1>,
 428                          <PIN_PA28__G0_RX2>,
 429                          <PIN_PA29__G0_RX3>,
 430                          <PIN_PA15__G0_TXEN>,
 431                          <PIN_PA30__G0_RXCK>,
 432                          <PIN_PA18__G0_RXDV>,
 433                          <PIN_PA25__G0_125CK>;
 434                 slew-rate = <0>;
 435                 bias-disable;
 436         };
 437
 438         pinctrl_gmac0_mdio_default: gmac0_mdio_default {
 439                 pinmux = <PIN_PA22__G0_MDC>,
 440                          <PIN_PA23__G0_MDIO>;
 441                 bias-disable;
 442         };
 443
 444         pinctrl_gmac0_txck_default: gmac0_txck_default {
 445                 pinmux = <PIN_PA24__G0_TXCK>;
 446                 slew-rate = <0>;
 447                 bias-pull-up;
 448         };
 449
 450         pinctrl_gmac0_phy_irq: gmac0_phy_irq {
 451                 pinmux = <PIN_PA31__GPIO>;
 452                 bias-disable;
 453         };
 454
 455         pinctrl_gmac1_default: gmac1_default {
 456                 pinmux = <PIN_PD30__G1_TXCK>,
 457                          <PIN_PD22__G1_TX0>,
 458                          <PIN_PD23__G1_TX1>,
 459                          <PIN_PD21__G1_TXEN>,
 460                          <PIN_PD25__G1_RX0>,
 461                          <PIN_PD26__G1_RX1>,
 462                          <PIN_PD27__G1_RXER>,
 463                          <PIN_PD24__G1_RXDV>;
 464                 slew-rate = <0>;
 465                 bias-disable;
 466         };
 467
 468         pinctrl_gmac1_mdio_default: gmac1_mdio_default {
 469                 pinmux = <PIN_PD28__G1_MDC>,
 470                          <PIN_PD29__G1_MDIO>;
 471                 bias-disable;
 472         };
 473
 474         pinctrl_gmac1_phy_irq: gmac1_phy_irq {
 475                 pinmux = <PIN_PA21__GPIO>;
 476                 bias-disable;
 477         };
 478
 479         pinctrl_i2c1_default: i2c1_default {
 480                 pinmux = <PIN_PC9__FLEXCOM1_IO0>,
 481                          <PIN_PC10__FLEXCOM1_IO1>;
 482                 bias-disable;
 483         };
 484
 485         pinctrl_i2c8_default: i2c8_default {
 486                 pinmux = <PIN_PC14__FLEXCOM8_IO0>,
 487                          <PIN_PC13__FLEXCOM8_IO1>;
 488                 bias-disable;
 489         };
 490
 491         pinctrl_i2c9_default: i2c9_default {
 492                 pinmux = <PIN_PC18__FLEXCOM9_IO0>,
 493                          <PIN_PC19__FLEXCOM9_IO1>;
 494                 bias-disable;
 495         };
 496
 497         pinctrl_i2s0_default: i2s0_default {
 498                 pinmux = <PIN_PB23__I2SMCC0_CK>,
 499                          <PIN_PB24__I2SMCC0_WS>,
 500                          <PIN_PB25__I2SMCC0_DOUT1>,
 501                          <PIN_PB26__I2SMCC0_DOUT0>,
 502                          <PIN_PB27__I2SMCC0_MCK>;
 503                 bias-disable;
 504         };
 505
 506         pinctrl_key_gpio_default: key_gpio_default {
 507                 pinmux = <PIN_PA12__GPIO>;
 508                 bias-pull-up;
 509         };
 510
 511         pinctrl_led_gpio_default: led_gpio_default {
 512                 pinmux = <PIN_PA13__GPIO>,
 513                          <PIN_PB8__GPIO>,
 514                          <PIN_PD20__GPIO>;
 515                 bias-pull-up;
 516         };
 517
 518         pinctrl_mikrobus1_an_default: mikrobus1_an_default {
 519                 pinmux = <PIN_PD0__GPIO>;
 520                 bias-disable;
 521         };
 522
 523         pinctrl_mikrobus2_an_default: mikrobus2_an_default {
 524                 pinmux = <PIN_PD1__GPIO>;
 525                 bias-disable;
 526         };
 527
 528         pinctrl_mikrobus1_pwm2_default: mikrobus1_pwm2_default {
 529                 pinmux = <PIN_PA13__PWMH2>;
 530                 bias-disable;
 531         };
 532
 533         pinctrl_mikrobus2_pwm3_default: mikrobus2_pwm3_default {
 534                 pinmux = <PIN_PD20__PWMH3>;
 535                 bias-disable;
 536         };
 537
 538         pinctrl_mikrobus1_spi_cs: mikrobus1_spi_cs {
 539                 pinmux = <PIN_PB6__FLEXCOM11_IO3>;
 540                 bias-disable;
 541         };
 542
 543         pinctrl_mikrobus1_spi: mikrobus1_spi {
 544                 pinmux = <PIN_PB3__FLEXCOM11_IO0>,
 545                          <PIN_PB4__FLEXCOM11_IO1>,
 546                          <PIN_PB5__FLEXCOM11_IO2>;
 547                 bias-disable;
 548         };
 549
 550         pinctrl_sdmmc0_default: sdmmc0_default {
 551                 cmd_data {
 552                         pinmux = <PIN_PA1__SDMMC0_CMD>,
 553                                  <PIN_PA3__SDMMC0_DAT0>,
 554                                  <PIN_PA4__SDMMC0_DAT1>,
 555                                  <PIN_PA5__SDMMC0_DAT2>,
 556                                  <PIN_PA6__SDMMC0_DAT3>,
 557                                  <PIN_PA7__SDMMC0_DAT4>,
 558                                  <PIN_PA8__SDMMC0_DAT5>,
 559                                  <PIN_PA9__SDMMC0_DAT6>,
 560                                  <PIN_PA10__SDMMC0_DAT7>;
 561                         slew-rate = <0>;
 562                         bias-pull-up;
 563                 };
 564
 565                 ck_cd_rstn_vddsel {
 566                         pinmux = <PIN_PA0__SDMMC0_CK>,
 567                                  <PIN_PA2__SDMMC0_RSTN>,
 568                                  <PIN_PA11__SDMMC0_DS>;
 569                         slew-rate = <0>;
 570                         bias-pull-up;
 571                 };
 572         };
 573
 574         pinctrl_sdmmc1_default: sdmmc1_default {
 575                 cmd_data {
 576                         pinmux = <PIN_PB29__SDMMC1_CMD>,
 577                                  <PIN_PB31__SDMMC1_DAT0>,
 578                                  <PIN_PC0__SDMMC1_DAT1>,
 579                                  <PIN_PC1__SDMMC1_DAT2>,
 580                                  <PIN_PC2__SDMMC1_DAT3>;
 581                         slew-rate = <0>;
 582                         bias-pull-up;
 583                 };
 584
 585                 ck_cd_rstn_vddsel {
 586                         pinmux = <PIN_PB30__SDMMC1_CK>,
 587                                  <PIN_PB28__SDMMC1_RSTN>,
 588                                  <PIN_PC5__SDMMC1_1V8SEL>,
 589                                  <PIN_PC4__SDMMC1_CD>;
 590                         slew-rate = <0>;
 591                         bias-pull-up;
 592                 };
 593         };
 594
 595         pinctrl_sdmmc2_default: sdmmc2_default {
 596                 cmd_data {
 597                         pinmux = <PIN_PD3__SDMMC2_CMD>,
 598                                  <PIN_PD5__SDMMC2_DAT0>,
 599                                  <PIN_PD6__SDMMC2_DAT1>,
 600                                  <PIN_PD7__SDMMC2_DAT2>,
 601                                  <PIN_PD8__SDMMC2_DAT3>;
 602                         slew-rate = <0>;
 603                         bias-pull-up;
 604                 };
 605
 606                 ck {
 607                         pinmux = <PIN_PD4__SDMMC2_CK>;
 608                         slew-rate = <0>;
 609                         bias-pull-up;
 610                 };
 611         };
 612
 613         pinctrl_spdifrx_default: spdifrx_default {
 614                 pinmux = <PIN_PB0__SPDIF_RX>;
 615                 bias-disable;
 616         };
 617
 618         pinctrl_spdiftx_default: spdiftx_default {
 619                 pinmux = <PIN_PB1__SPDIF_TX>;
 620                 bias-disable;
 621         };
 622 };
 623
 624 &pwm {
 625         pinctrl-names = "default";
 626         pinctrl-0 = <&pinctrl_mikrobus1_pwm2_default &pinctrl_mikrobus2_pwm3_default>;
 627         status = "disabled"; /* Conflict with leds. */
 628 };
 629
 630 &rtt {
 631         atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
 632 };
 633
 634 &sdmmc0 {
 635         bus-width = <8>;
 636         non-removable;
 637         no-1-8-v;
 638         sdhci-caps-mask = <0x0 0x00200000>;
 639         pinctrl-names = "default";
 640         pinctrl-0 = <&pinctrl_sdmmc0_default>;
 641         status = "okay";
 642 };
 643
 644 &sdmmc1 {
 645         bus-width = <4>;
 646         no-1-8-v;
 647         sdhci-caps-mask = <0x0 0x00200000>;
 648         pinctrl-names = "default";
 649         pinctrl-0 = <&pinctrl_sdmmc1_default>;
 650         status = "okay";
 651 };
 652
 653 &sdmmc2 {
 654         bus-width = <4>;
 655         no-1-8-v;
 656         sdhci-caps-mask = <0x0 0x00200000>;
 657         pinctrl-names = "default";
 658         pinctrl-0 = <&pinctrl_sdmmc2_default>;
 659 };
 660
 661 &shdwc {
 662         atmel,shdwc-debouncer = <976>;
 663         status = "okay";
 664
 665         input@0 {
 666                 reg = <0>;
 667         };
 668 };
 669
 670 &spdifrx {
 671         pinctrl-names = "default";
 672         pinctrl-0 = <&pinctrl_spdifrx_default>;
 673         status = "okay";
 674 };
 675
 676 &spdiftx {
 677         pinctrl-names = "default";
 678         pinctrl-0 = <&pinctrl_spdiftx_default>;
 679         status = "okay";
 680 };
 681
 682 &trng {
 683         status = "okay";
 684 };
 685
 686 &vddout25 {
 687         vin-supply = <&vdd_3v3>;
 688         status = "okay";
 689 };