2 * at91-sama5d4_xplained.dts - Device Tree file for SAMA5D4 Xplained board
4 * Copyright (C) 2015 Atmel,
5 * 2015 Josh Wu <josh.wu@atmel.com>
7 * This file is dual-licensed: you can use it either under the terms
8 * of the GPL or the X11 license, at your option. Note that this dual
9 * licensing only applies to this file, and not this project as a
12 * a) This file is free software; you can redistribute it and/or
13 * modify it under the terms of the GNU General Public License as
14 * published by the Free Software Foundation; either version 2 of the
15 * License, or (at your option) any later version.
17 * This file is distributed in the hope that it will be useful,
18 * but WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 * GNU General Public License for more details.
24 * b) Permission is hereby granted, free of charge, to any person
25 * obtaining a copy of this software and associated documentation
26 * files (the "Software"), to deal in the Software without
27 * restriction, including without limitation the rights to use,
28 * copy, modify, merge, publish, distribute, sublicense, and/or
29 * sell copies of the Software, and to permit persons to whom the
30 * Software is furnished to do so, subject to the following
33 * The above copyright notice and this permission notice shall be
34 * included in all copies or substantial portions of the Software.
36 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
37 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
38 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
39 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
40 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
41 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
42 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
43 * OTHER DEALINGS IN THE SOFTWARE.
46 #include "sama5d4.dtsi"
49 model = "Atmel SAMA5D4 Xplained";
50 compatible = "atmel,sama5d4-xplained", "atmel,sama5d4", "atmel,sama5";
53 stdout-path = "serial0:115200n8";
57 reg = <0x20000000 0x20000000>;
62 clock-frequency = <32768>;
66 clock-frequency = <12000000>;
73 cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
76 compatible = "atmel,at25df321a";
77 spi-max-frequency = <50000000>;
86 macb0: ethernet@f8020000 {
89 pinctrl-names = "default";
90 pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
92 phy0: ethernet-phy@1 {
93 interrupt-parent = <&pioE>;
94 interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
100 pinctrl-names = "default";
101 pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
102 vmmc-supply = <&vcc_mmc1_reg>;
103 vqmmc-supply = <&vcc_3v3_reg>;
108 cd-gpios = <&pioE 3 0>;
112 usart3: serial@fc00c000 {
118 usart4: serial@fc010000 {
123 cs-gpios = <&pioB 21 0>;
128 pinctrl-names = "default";
130 /* external trigger conflicts with USBA_VBUS */
137 atmel,adc-vref = <3300>;
147 pinctrl_mmc1_cd: mmc1_cd {
149 <AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
151 pinctrl_usba_vbus: usba_vbus {
153 <AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
155 pinctrl_usb_default: usb_default {
157 <AT91_PIOE 11 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
158 AT91_PIOE 14 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
160 pinctrl_key_gpio: key_gpio_0 {
162 <AT91_PIOE 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
164 pinctrl_macb0_phy_irq: macb0_phy_irq_0 {
166 <AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
172 usb0: gadget@00400000 {
173 atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
174 pinctrl-names = "default";
175 pinctrl-0 = <&pinctrl_usba_vbus>;
179 usb1: ohci@00500000 {
182 &pioE 11 GPIO_ACTIVE_HIGH
183 &pioE 14 GPIO_ACTIVE_HIGH
185 pinctrl-names = "default";
186 pinctrl-0 = <&pinctrl_usb_default>;
190 usb2: ehci@00600000 {
194 nand0: nand@80000000 {
195 nand-bus-width = <8>;
196 nand-ecc-mode = "hw";
202 label = "at91bootstrap";
207 label = "bootloader";
208 reg = <0x40000 0x80000>;
211 bootloaderenv@c0000 {
212 label = "bootloader env";
213 reg = <0xc0000 0xc0000>;
217 label = "device tree";
218 reg = <0x180000 0x80000>;
223 reg = <0x200000 0x600000>;
228 reg = <0x800000 0x0f800000>;
234 compatible = "gpio-keys";
236 pinctrl-names = "default";
237 pinctrl-0 = <&pinctrl_key_gpio>;
241 gpios = <&pioE 8 GPIO_ACTIVE_HIGH>;
242 linux,code = <0x100>;
248 compatible = "gpio-leds";
253 gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
254 default-state = "on";
259 gpios = <&pioE 15 GPIO_ACTIVE_LOW>;
260 linux,default-trigger = "heartbeat";
264 vcc_3v3_reg: fixedregulator@0 {
265 compatible = "regulator-fixed";
266 regulator-name = "VCC 3V3";
267 regulator-min-microvolt = <3300000>;
268 regulator-max-microvolt = <3300000>;
273 vcc_mmc1_reg: fixedregulator@1 {
274 compatible = "regulator-fixed";
275 gpio = <&pioE 4 GPIO_ACTIVE_LOW>;
276 regulator-name = "VDD MCI1";
277 regulator-min-microvolt = <3300000>;
278 regulator-max-microvolt = <3300000>;
279 vin-supply = <&vcc_3v3_reg>;