arch/arm/boot/dts/armada-xp-mv78230.dtsi

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Device Tree Include file for Marvell Armada XP family SoC
   4  *
   5  * Copyright (C) 2012 Marvell
   6  *
   7  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
   8  *
   9  * Contains definitions specific to the Armada XP MV78230 SoC that are not
  10  * common to all Armada XP SoCs.
  11  */
  12
  13 #include "armada-xp.dtsi"
  14
  15 / {
  16         model = "Marvell Armada XP MV78230 SoC";
  17         compatible = "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
  18
  19         aliases {
  20                 gpio0 = &gpio0;
  21                 gpio1 = &gpio1;
  22         };
  23
  24         cpus {
  25                 #address-cells = <1>;
  26                 #size-cells = <0>;
  27                 enable-method = "marvell,armada-xp-smp";
  28
  29                 cpu@0 {
  30                         device_type = "cpu";
  31                         compatible = "marvell,sheeva-v7";
  32                         reg = <0>;
  33                         clocks = <&cpuclk 0>;
  34                         clock-latency = <1000000>;
  35                 };
  36
  37                 cpu@1 {
  38                         device_type = "cpu";
  39                         compatible = "marvell,sheeva-v7";
  40                         reg = <1>;
  41                         clocks = <&cpuclk 1>;
  42                         clock-latency = <1000000>;
  43                 };
  44         };
  45
  46         soc {
  47                 /*
  48                  * MV78230 has 2 PCIe units Gen2.0: One unit can be
  49                  * configured as x4 or quad x1 lanes. One unit is
  50                  * x1 only.
  51                  */
  52                 pciec: pcie@82000000 {
  53                         compatible = "marvell,armada-xp-pcie";
  54                         status = "disabled";
  55                         device_type = "pci";
  56
  57                         #address-cells = <3>;
  58                         #size-cells = <2>;
  59
  60                         msi-parent = <&mpic>;
  61                         bus-range = <0x00 0xff>;
  62
  63                         ranges =
  64                                <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
  65                                 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
  66                                 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
  67                                 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
  68                                 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
  69                                 0x82000000 0x1 0       MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
  70                                 0x81000000 0x1 0       MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
  71                                 0x82000000 0x2 0       MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
  72                                 0x81000000 0x2 0       MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
  73                                 0x82000000 0x3 0       MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
  74                                 0x81000000 0x3 0       MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
  75                                 0x82000000 0x4 0       MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
  76                                 0x81000000 0x4 0       MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
  77                                 0x82000000 0x5 0       MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
  78                                 0x81000000 0x5 0       MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */>;
  79
  80                         pcie1: pcie@1,0 {
  81                                 device_type = "pci";
  82                                 assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
  83                                 reg = <0x0800 0 0 0 0>;
  84                                 #address-cells = <3>;
  85                                 #size-cells = <2>;
  86                                 interrupt-names = "intx";
  87                                 interrupts-extended = <&mpic 58>;
  88                                 #interrupt-cells = <1>;
  89                                 ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
  90                                           0x81000000 0 0 0x81000000 0x1 0 1 0>;
  91                                 bus-range = <0x00 0xff>;
  92                                 interrupt-map-mask = <0 0 0 7>;
  93                                 interrupt-map = <0 0 0 1 &pcie1_intc 0>,
  94                                                 <0 0 0 2 &pcie1_intc 1>,
  95                                                 <0 0 0 3 &pcie1_intc 2>,
  96                                                 <0 0 0 4 &pcie1_intc 3>;
  97                                 marvell,pcie-port = <0>;
  98                                 marvell,pcie-lane = <0>;
  99                                 clocks = <&gateclk 5>;
 100                                 status = "disabled";
 101
 102                                 pcie1_intc: interrupt-controller {
 103                                         interrupt-controller;
 104                                         #interrupt-cells = <1>;
 105                                 };
 106                         };
 107
 108                         pcie2: pcie@2,0 {
 109                                 device_type = "pci";
 110                                 assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
 111                                 reg = <0x1000 0 0 0 0>;
 112                                 #address-cells = <3>;
 113                                 #size-cells = <2>;
 114                                 interrupt-names = "intx";
 115                                 interrupts-extended = <&mpic 59>;
 116                                 #interrupt-cells = <1>;
 117                                 ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 118                                           0x81000000 0 0 0x81000000 0x2 0 1 0>;
 119                                 bus-range = <0x00 0xff>;
 120                                 interrupt-map-mask = <0 0 0 7>;
 121                                 interrupt-map = <0 0 0 1 &pcie2_intc 0>,
 122                                                 <0 0 0 2 &pcie2_intc 1>,
 123                                                 <0 0 0 3 &pcie2_intc 2>,
 124                                                 <0 0 0 4 &pcie2_intc 3>;
 125                                 marvell,pcie-port = <0>;
 126                                 marvell,pcie-lane = <1>;
 127                                 clocks = <&gateclk 6>;
 128                                 status = "disabled";
 129
 130                                 pcie2_intc: interrupt-controller {
 131                                         interrupt-controller;
 132                                         #interrupt-cells = <1>;
 133                                 };
 134                         };
 135
 136                         pcie3: pcie@3,0 {
 137                                 device_type = "pci";
 138                                 assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
 139                                 reg = <0x1800 0 0 0 0>;
 140                                 #address-cells = <3>;
 141                                 #size-cells = <2>;
 142                                 interrupt-names = "intx";
 143                                 interrupts-extended = <&mpic 60>;
 144                                 #interrupt-cells = <1>;
 145                                 ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
 146                                           0x81000000 0 0 0x81000000 0x3 0 1 0>;
 147                                 bus-range = <0x00 0xff>;
 148                                 interrupt-map-mask = <0 0 0 7>;
 149                                 interrupt-map = <0 0 0 1 &pcie3_intc 0>,
 150                                                 <0 0 0 2 &pcie3_intc 1>,
 151                                                 <0 0 0 3 &pcie3_intc 2>,
 152                                                 <0 0 0 4 &pcie3_intc 3>;
 153                                 marvell,pcie-port = <0>;
 154                                 marvell,pcie-lane = <2>;
 155                                 clocks = <&gateclk 7>;
 156                                 status = "disabled";
 157
 158                                 pcie3_intc: interrupt-controller {
 159                                         interrupt-controller;
 160                                         #interrupt-cells = <1>;
 161                                 };
 162                         };
 163
 164                         pcie4: pcie@4,0 {
 165                                 device_type = "pci";
 166                                 assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
 167                                 reg = <0x2000 0 0 0 0>;
 168                                 #address-cells = <3>;
 169                                 #size-cells = <2>;
 170                                 interrupt-names = "intx";
 171                                 interrupts-extended = <&mpic 61>;
 172                                 #interrupt-cells = <1>;
 173                                 ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
 174                                           0x81000000 0 0 0x81000000 0x4 0 1 0>;
 175                                 bus-range = <0x00 0xff>;
 176                                 interrupt-map-mask = <0 0 0 7>;
 177                                 interrupt-map = <0 0 0 1 &pcie4_intc 0>,
 178                                                 <0 0 0 2 &pcie4_intc 1>,
 179                                                 <0 0 0 3 &pcie4_intc 2>,
 180                                                 <0 0 0 4 &pcie4_intc 3>;
 181                                 marvell,pcie-port = <0>;
 182                                 marvell,pcie-lane = <3>;
 183                                 clocks = <&gateclk 8>;
 184                                 status = "disabled";
 185
 186                                 pcie4_intc: interrupt-controller {
 187                                         interrupt-controller;
 188                                         #interrupt-cells = <1>;
 189                                 };
 190                         };
 191
 192                         pcie5: pcie@5,0 {
 193                                 device_type = "pci";
 194                                 assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
 195                                 reg = <0x2800 0 0 0 0>;
 196                                 #address-cells = <3>;
 197                                 #size-cells = <2>;
 198                                 interrupt-names = "intx";
 199                                 interrupts-extended = <&mpic 62>;
 200                                 #interrupt-cells = <1>;
 201                                 ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
 202                                           0x81000000 0 0 0x81000000 0x5 0 1 0>;
 203                                 bus-range = <0x00 0xff>;
 204                                 interrupt-map-mask = <0 0 0 7>;
 205                                 interrupt-map = <0 0 0 1 &pcie5_intc 0>,
 206                                                 <0 0 0 2 &pcie5_intc 1>,
 207                                                 <0 0 0 3 &pcie5_intc 2>,
 208                                                 <0 0 0 4 &pcie5_intc 3>;
 209                                 marvell,pcie-port = <1>;
 210                                 marvell,pcie-lane = <0>;
 211                                 clocks = <&gateclk 9>;
 212                                 status = "disabled";
 213
 214                                 pcie5_intc: interrupt-controller {
 215                                         interrupt-controller;
 216                                         #interrupt-cells = <1>;
 217                                 };
 218                         };
 219                 };
 220
 221                 internal-regs {
 222                         gpio0: gpio@18100 {
 223                                 compatible = "marvell,armada-370-gpio",
 224                                              "marvell,orion-gpio";
 225                                 reg = <0x18100 0x40>, <0x181c0 0x08>;
 226                                 reg-names = "gpio", "pwm";
 227                                 ngpios = <32>;
 228                                 gpio-controller;
 229                                 #gpio-cells = <2>;
 230                                 #pwm-cells = <2>;
 231                                 interrupt-controller;
 232                                 #interrupt-cells = <2>;
 233                                 interrupts = <82>, <83>, <84>, <85>;
 234                                 clocks = <&coreclk 0>;
 235                         };
 236
 237                         gpio1: gpio@18140 {
 238                                 compatible = "marvell,armada-370-gpio",
 239                                              "marvell,orion-gpio";
 240                                 reg = <0x18140 0x40>, <0x181c8 0x08>;
 241                                 reg-names = "gpio", "pwm";
 242                                 ngpios = <17>;
 243                                 gpio-controller;
 244                                 #gpio-cells = <2>;
 245                                 #pwm-cells = <2>;
 246                                 interrupt-controller;
 247                                 #interrupt-cells = <2>;
 248                                 interrupts = <87>, <88>, <89>;
 249                                 clocks = <&coreclk 0>;
 250                         };
 251                 };
 252         };
 253 };
 254
 255 &pinctrl {
 256         compatible = "marvell,mv78230-pinctrl";
 257 };