arch/arm/boot/dts/armada-xp-db.dts

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Device Tree file for Marvell Armada XP evaluation board
   4  * (DB-78460-BP)
   5  *
   6  * Copyright (C) 2012-2014 Marvell
   7  *
   8  * Lior Amsalem <alior@marvell.com>
   9  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  10  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  11  *
  12   *
  13  * Note: this Device Tree assumes that the bootloader has remapped the
  14  * internal registers to 0xf1000000 (instead of the default
  15  * 0xd0000000). The 0xf1000000 is the default used by the recent,
  16  * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
  17  * boards were delivered with an older version of the bootloader that
  18  * left internal registers mapped at 0xd0000000. If you are in this
  19  * situation, you should either update your bootloader (preferred
  20  * solution) or the below Device Tree should be adjusted.
  21  */
  22
  23 /dts-v1/;
  24 #include "armada-xp-mv78460.dtsi"
  25
  26 / {
  27         model = "Marvell Armada XP Evaluation Board";
  28         compatible = "marvell,axp-db", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
  29
  30         chosen {
  31                 stdout-path = "serial0:115200n8";
  32         };
  33
  34         memory@0 {
  35                 device_type = "memory";
  36                 reg = <0 0x00000000 0 0x80000000>; /* 2 GB */
  37         };
  38
  39         soc {
  40                 ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
  41                           MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
  42                           MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
  43                           MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
  44                           MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
  45                           MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>;
  46
  47                 devbus-bootcs {
  48                         status = "okay";
  49
  50                         /* Device Bus parameters are required */
  51
  52                         /* Read parameters */
  53                         devbus,bus-width    = <16>;
  54                         devbus,turn-off-ps  = <60000>;
  55                         devbus,badr-skew-ps = <0>;
  56                         devbus,acc-first-ps = <124000>;
  57                         devbus,acc-next-ps  = <248000>;
  58                         devbus,rd-setup-ps  = <0>;
  59                         devbus,rd-hold-ps   = <0>;
  60
  61                         /* Write parameters */
  62                         devbus,sync-enable = <0>;
  63                         devbus,wr-high-ps  = <60000>;
  64                         devbus,wr-low-ps   = <60000>;
  65                         devbus,ale-wr-ps   = <60000>;
  66
  67                         /* NOR 16 MiB */
  68                         nor@0 {
  69                                 compatible = "cfi-flash";
  70                                 reg = <0 0x1000000>;
  71                                 bank-width = <2>;
  72                         };
  73                 };
  74
  75                 internal-regs {
  76                         serial@12000 {
  77                                 status = "okay";
  78                         };
  79                         serial@12100 {
  80                                 status = "okay";
  81                         };
  82                         serial@12200 {
  83                                 status = "okay";
  84                         };
  85                         serial@12300 {
  86                                 status = "okay";
  87                         };
  88
  89                         sata@a0000 {
  90                                 nr-ports = <2>;
  91                                 status = "okay";
  92                         };
  93
  94                         ethernet@70000 {
  95                                 status = "okay";
  96                                 phy = <&phy0>;
  97                                 phy-mode = "rgmii-id";
  98                                 buffer-manager = <&bm>;
  99                                 bm,pool-long = <0>;
 100                         };
 101                         ethernet@74000 {
 102                                 status = "okay";
 103                                 phy = <&phy1>;
 104                                 phy-mode = "rgmii-id";
 105                                 buffer-manager = <&bm>;
 106                                 bm,pool-long = <1>;
 107                         };
 108                         ethernet@30000 {
 109                                 status = "okay";
 110                                 phy = <&phy2>;
 111                                 phy-mode = "sgmii";
 112                                 buffer-manager = <&bm>;
 113                                 bm,pool-long = <2>;
 114                         };
 115                         ethernet@34000 {
 116                                 status = "okay";
 117                                 phy = <&phy3>;
 118                                 phy-mode = "sgmii";
 119                                 buffer-manager = <&bm>;
 120                                 bm,pool-long = <3>;
 121                         };
 122
 123                         bm@c0000 {
 124                                 status = "okay";
 125                         };
 126
 127                         mvsdio@d4000 {
 128                                 pinctrl-0 = <&sdio_pins>;
 129                                 pinctrl-names = "default";
 130                                 status = "okay";
 131                                 /* No CD or WP GPIOs */
 132                                 broken-cd;
 133                         };
 134
 135                         usb@50000 {
 136                                 status = "okay";
 137                         };
 138
 139                         usb@51000 {
 140                                 status = "okay";
 141                         };
 142
 143                         usb@52000 {
 144                                 status = "okay";
 145                         };
 146
 147                         nand-controller@d0000 {
 148                                 status = "okay";
 149
 150                                 nand@0 {
 151                                         reg = <0>;
 152                                         label = "pxa3xx_nand-0";
 153                                         nand-rb = <0>;
 154                                         nand-on-flash-bbt;
 155
 156                                         partitions {
 157                                                 compatible = "fixed-partitions";
 158                                                 #address-cells = <1>;
 159                                                 #size-cells = <1>;
 160
 161                                                 partition@0 {
 162                                                         label = "U-Boot";
 163                                                         reg = <0 0x800000>;
 164                                                 };
 165                                                 partition@800000 {
 166                                                         label = "Linux";
 167                                                         reg = <0x800000 0x800000>;
 168                                                 };
 169                                                 partition@1000000 {
 170                                                         label = "Filesystem";
 171                                                         reg = <0x1000000 0x3f000000>;
 172                                                 };
 173                                         };
 174                                 };
 175                         };
 176                 };
 177
 178                 bm-bppi {
 179                         status = "okay";
 180                 };
 181         };
 182 };
 183
 184 &pciec {
 185         status = "okay";
 186
 187         /*
 188          * All 6 slots are physically present as
 189          * standard PCIe slots on the board.
 190          */
 191         pcie@1,0 {
 192                 /* Port 0, Lane 0 */
 193                 status = "okay";
 194         };
 195         pcie@2,0 {
 196                 /* Port 0, Lane 1 */
 197                 status = "okay";
 198         };
 199         pcie@3,0 {
 200                 /* Port 0, Lane 2 */
 201                 status = "okay";
 202         };
 203         pcie@4,0 {
 204                 /* Port 0, Lane 3 */
 205                 status = "okay";
 206         };
 207         pcie@9,0 {
 208                 /* Port 2, Lane 0 */
 209                 status = "okay";
 210         };
 211         pcie@a,0 {
 212                 /* Port 3, Lane 0 */
 213                 status = "okay";
 214         };
 215 };
 216
 217 &mdio {
 218         phy0: ethernet-phy@0 {
 219                 reg = <0>;
 220         };
 221
 222         phy1: ethernet-phy@1 {
 223                 reg = <1>;
 224         };
 225
 226         phy2: ethernet-phy@2 {
 227                 reg = <25>;
 228         };
 229
 230         phy3: ethernet-phy@3 {
 231                 reg = <27>;
 232         };
 233 };
 234
 235 &spi0 {
 236         status = "okay";
 237
 238         spi-flash@0 {
 239                 #address-cells = <1>;
 240                 #size-cells = <1>;
 241                 compatible = "m25p64", "jedec,spi-nor";
 242                 reg = <0>; /* Chip select 0 */
 243                 spi-max-frequency = <20000000>;
 244         };
 245 };