arch/arm/boot/dts/armada-385.dtsi

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Device Tree Include file for Marvell Armada 385 SoC.
   4  *
   5  * Copyright (C) 2014 Marvell
   6  *
   7  * Lior Amsalem <alior@marvell.com>
   8  * Gregory CLEMENT <gregory.clement@free-electrons.com>
   9  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  10  */
  11
  12 #include "armada-38x.dtsi"
  13
  14 / {
  15         model = "Marvell Armada 385 family SoC";
  16         compatible = "marvell,armada385", "marvell,armada380";
  17
  18         cpus {
  19                 #address-cells = <1>;
  20                 #size-cells = <0>;
  21                 enable-method = "marvell,armada-380-smp";
  22
  23                 cpu@0 {
  24                         device_type = "cpu";
  25                         compatible = "arm,cortex-a9";
  26                         reg = <0>;
  27                 };
  28                 cpu@1 {
  29                         device_type = "cpu";
  30                         compatible = "arm,cortex-a9";
  31                         reg = <1>;
  32                 };
  33         };
  34
  35         soc {
  36                 pciec: pcie {
  37                         compatible = "marvell,armada-370-pcie";
  38                         status = "disabled";
  39                         device_type = "pci";
  40
  41                         #address-cells = <3>;
  42                         #size-cells = <2>;
  43
  44                         msi-parent = <&mpic>;
  45                         bus-range = <0x00 0xff>;
  46
  47                         ranges =
  48                                <0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
  49                                 0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
  50                                 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
  51                                 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000
  52                                 0x82000000 0x1 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 0 MEM */
  53                                 0x81000000 0x1 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 0 IO  */
  54                                 0x82000000 0x2 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 1 MEM */
  55                                 0x81000000 0x2 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 1 IO  */
  56                                 0x82000000 0x3 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 2 MEM */
  57                                 0x81000000 0x3 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 2 IO  */
  58                                 0x82000000 0x4 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 3 MEM */
  59                                 0x81000000 0x4 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 3 IO  */>;
  60
  61                         /*
  62                          * This port can be either x4 or x1. When
  63                          * configured in x4 by the bootloader, then
  64                          * pcie@4,0 is not available.
  65                          */
  66                         pcie1: pcie@1,0 {
  67                                 device_type = "pci";
  68                                 assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
  69                                 reg = <0x0800 0 0 0 0>;
  70                                 #address-cells = <3>;
  71                                 #size-cells = <2>;
  72                                 interrupt-names = "intx";
  73                                 interrupts-extended = <&gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
  74                                 #interrupt-cells = <1>;
  75                                 ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
  76                                           0x81000000 0 0 0x81000000 0x1 0 1 0>;
  77                                 bus-range = <0x00 0xff>;
  78                                 interrupt-map-mask = <0 0 0 7>;
  79                                 interrupt-map = <0 0 0 1 &pcie1_intc 0>,
  80                                                 <0 0 0 2 &pcie1_intc 1>,
  81                                                 <0 0 0 3 &pcie1_intc 2>,
  82                                                 <0 0 0 4 &pcie1_intc 3>;
  83                                 marvell,pcie-port = <0>;
  84                                 marvell,pcie-lane = <0>;
  85                                 clocks = <&gateclk 8>;
  86                                 status = "disabled";
  87                                 pcie1_intc: interrupt-controller {
  88                                         interrupt-controller;
  89                                         #interrupt-cells = <1>;
  90                                 };
  91                         };
  92
  93                         /* x1 port */
  94                         pcie2: pcie@2,0 {
  95                                 device_type = "pci";
  96                                 assigned-addresses = <0x82001000 0 0x40000 0 0x2000>;
  97                                 reg = <0x1000 0 0 0 0>;
  98                                 #address-cells = <3>;
  99                                 #size-cells = <2>;
 100                                 interrupt-names = "intx";
 101                                 interrupts-extended = <&gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 102                                 #interrupt-cells = <1>;
 103                                 ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 104                                           0x81000000 0 0 0x81000000 0x2 0 1 0>;
 105                                 bus-range = <0x00 0xff>;
 106                                 interrupt-map-mask = <0 0 0 7>;
 107                                 interrupt-map = <0 0 0 1 &pcie2_intc 0>,
 108                                                 <0 0 0 2 &pcie2_intc 1>,
 109                                                 <0 0 0 3 &pcie2_intc 2>,
 110                                                 <0 0 0 4 &pcie2_intc 3>;
 111                                 marvell,pcie-port = <1>;
 112                                 marvell,pcie-lane = <0>;
 113                                 clocks = <&gateclk 5>;
 114                                 status = "disabled";
 115                                 pcie2_intc: interrupt-controller {
 116                                         interrupt-controller;
 117                                         #interrupt-cells = <1>;
 118                                 };
 119                         };
 120
 121                         /* x1 port */
 122                         pcie3: pcie@3,0 {
 123                                 device_type = "pci";
 124                                 assigned-addresses = <0x82001800 0 0x44000 0 0x2000>;
 125                                 reg = <0x1800 0 0 0 0>;
 126                                 #address-cells = <3>;
 127                                 #size-cells = <2>;
 128                                 interrupt-names = "intx";
 129                                 interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 130                                 #interrupt-cells = <1>;
 131                                 ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
 132                                           0x81000000 0 0 0x81000000 0x3 0 1 0>;
 133                                 bus-range = <0x00 0xff>;
 134                                 interrupt-map-mask = <0 0 0 7>;
 135                                 interrupt-map = <0 0 0 1 &pcie3_intc 0>,
 136                                                 <0 0 0 2 &pcie3_intc 1>,
 137                                                 <0 0 0 3 &pcie3_intc 2>,
 138                                                 <0 0 0 4 &pcie3_intc 3>;
 139                                 marvell,pcie-port = <2>;
 140                                 marvell,pcie-lane = <0>;
 141                                 clocks = <&gateclk 6>;
 142                                 status = "disabled";
 143                                 pcie3_intc: interrupt-controller {
 144                                         interrupt-controller;
 145                                         #interrupt-cells = <1>;
 146                                 };
 147                         };
 148
 149                         /*
 150                          * x1 port only available when pcie@1,0 is
 151                          * configured as a x1 port
 152                          */
 153                         pcie4: pcie@4,0 {
 154                                 device_type = "pci";
 155                                 assigned-addresses = <0x82002000 0 0x48000 0 0x2000>;
 156                                 reg = <0x2000 0 0 0 0>;
 157                                 #address-cells = <3>;
 158                                 #size-cells = <2>;
 159                                 interrupt-names = "intx";
 160                                 interrupts-extended = <&gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 161                                 #interrupt-cells = <1>;
 162                                 ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
 163                                           0x81000000 0 0 0x81000000 0x4 0 1 0>;
 164                                 bus-range = <0x00 0xff>;
 165                                 interrupt-map-mask = <0 0 0 7>;
 166                                 interrupt-map = <0 0 0 1 &pcie4_intc 0>,
 167                                                 <0 0 0 2 &pcie4_intc 1>,
 168                                                 <0 0 0 3 &pcie4_intc 2>,
 169                                                 <0 0 0 4 &pcie4_intc 3>;
 170                                 marvell,pcie-port = <3>;
 171                                 marvell,pcie-lane = <0>;
 172                                 clocks = <&gateclk 7>;
 173                                 status = "disabled";
 174                                 pcie4_intc: interrupt-controller {
 175                                         interrupt-controller;
 176                                         #interrupt-cells = <1>;
 177                                 };
 178                         };
 179                 };
 180         };
 181 };
 182
 183 &pinctrl {
 184         compatible = "marvell,mv88f6820-pinctrl";
 185 };