arch/arm/boot/dts/arm-realview-pbx.dtsi

   1 /*
   2  * Copyright 2016 Linaro Ltd
   3  *
   4  * Permission is hereby granted, free of charge, to any person obtaining a copy
   5  * of this software and associated documentation files (the "Software"), to deal
   6  * in the Software without restriction, including without limitation the rights
   7  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
   8  * copies of the Software, and to permit persons to whom the Software is
   9  * furnished to do so, subject to the following conditions:
  10  *
  11  * The above copyright notice and this permission notice shall be included in
  12  * all copies or substantial portions of the Software.
  13  *
  14  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  15  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  16  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
  17  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  18  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
  19  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
  20  * THE SOFTWARE.
  21  */
  22
  23 #include <dt-bindings/interrupt-controller/irq.h>
  24 #include <dt-bindings/gpio/gpio.h>
  25 #include "skeleton.dtsi"
  26
  27 / {
  28         compatible = "arm,realview-pbx";
  29
  30         chosen { };
  31
  32         aliases {
  33                 serial0 = &serial0;
  34                 serial1 = &serial1;
  35                 serial2 = &serial2;
  36                 serial3 = &serial3;
  37                 i2c0 = &i2c0;
  38                 i2c1 = &i2c1;
  39         };
  40
  41         memory {
  42                 /* 128 MiB memory @ 0x0 */
  43                 reg = <0x00000000 0x08000000>;
  44         };
  45
  46         /* The voltage to the MMC card is hardwired at 3.3V */
  47         vmmc: regulator-vmmc {
  48                 compatible = "regulator-fixed";
  49                 regulator-name = "vmmc";
  50                 regulator-min-microvolt = <3300000>;
  51                 regulator-max-microvolt = <3300000>;
  52                 regulator-boot-on;
  53         };
  54
  55         veth: regulator-veth {
  56                 compatible = "regulator-fixed";
  57                 regulator-name = "veth";
  58                 regulator-min-microvolt = <3300000>;
  59                 regulator-max-microvolt = <3300000>;
  60                 regulator-boot-on;
  61         };
  62
  63         xtal24mhz: xtal24mhz@24M {
  64                 #clock-cells = <0>;
  65                 compatible = "fixed-clock";
  66                 clock-frequency = <24000000>;
  67         };
  68
  69         refclk32khz: refclk32khz {
  70                 #clock-cells = <0>;
  71                 compatible = "fixed-clock";
  72                 clock-frequency = <32768>;
  73         };
  74
  75         timclk: timclk@1M {
  76                 #clock-cells = <0>;
  77                 compatible = "fixed-factor-clock";
  78                 clock-div = <24>;
  79                 clock-mult = <1>;
  80                 clocks = <&xtal24mhz>;
  81         };
  82
  83         mclk: mclk@24M {
  84                 #clock-cells = <0>;
  85                 compatible = "fixed-factor-clock";
  86                 clock-div = <1>;
  87                 clock-mult = <1>;
  88                 clocks = <&xtal24mhz>;
  89         };
  90
  91         kmiclk: kmiclk@24M {
  92                 #clock-cells = <0>;
  93                 compatible = "fixed-factor-clock";
  94                 clock-div = <1>;
  95                 clock-mult = <1>;
  96                 clocks = <&xtal24mhz>;
  97         };
  98
  99         sspclk: sspclk@24M {
 100                 #clock-cells = <0>;
 101                 compatible = "fixed-factor-clock";
 102                 clock-div = <1>;
 103                 clock-mult = <1>;
 104                 clocks = <&xtal24mhz>;
 105         };
 106
 107         uartclk: uartclk@24M {
 108                 #clock-cells = <0>;
 109                 compatible = "fixed-factor-clock";
 110                 clock-div = <1>;
 111                 clock-mult = <1>;
 112                 clocks = <&xtal24mhz>;
 113         };
 114
 115         wdogclk: wdogclk@24M {
 116                 #clock-cells = <0>;
 117                 compatible = "fixed-factor-clock";
 118                 clock-div = <1>;
 119                 clock-mult = <1>;
 120                 clocks = <&xtal24mhz>;
 121         };
 122
 123         /* FIXME: this actually hangs off the PLL clocks */
 124         pclk: pclk@0 {
 125                 #clock-cells = <0>;
 126                 compatible = "fixed-clock";
 127                 clock-frequency = <0>;
 128         };
 129
 130         flash0@40000000 {
 131                 /* 2 * 32MiB NOR Flash memory */
 132                 compatible = "arm,versatile-flash", "cfi-flash";
 133                 reg = <0x40000000 0x04000000>;
 134                 bank-width = <4>;
 135         };
 136
 137         flash1@44000000 {
 138                 /* 2 * 32MiB NOR Flash memory */
 139                 compatible = "arm,versatile-flash", "cfi-flash";
 140                 reg = <0x44000000 0x04000000>;
 141                 bank-width = <4>;
 142         };
 143
 144         /* SMSC 9118 ethernet with PHY and EEPROM */
 145         ethernet: ethernet@4e000000 {
 146                 compatible = "smsc,lan9118", "smsc,lan9115";
 147                 reg = <0x4e000000 0x10000>;
 148                 phy-mode = "mii";
 149                 reg-io-width = <4>;
 150                 smsc,irq-active-high;
 151                 smsc,irq-push-pull;
 152                 vdd33a-supply = <&veth>;
 153                 vddvario-supply = <&veth>;
 154         };
 155
 156         usb: usb@4f000000 {
 157                 compatible = "nxp,usb-isp1761";
 158                 reg = <0x4f000000 0x20000>;
 159                 port1-otg;
 160         };
 161
 162         bridge {
 163                 compatible = "ti,ths8134a", "ti,ths8134";
 164                 #address-cells = <1>;
 165                 #size-cells = <0>;
 166
 167                 ports {
 168                         #address-cells = <1>;
 169                         #size-cells = <0>;
 170
 171                         port@0 {
 172                                 reg = <0>;
 173
 174                                 vga_bridge_in: endpoint {
 175                                         remote-endpoint = <&clcd_pads>;
 176                                 };
 177                         };
 178
 179                         port@1 {
 180                                 reg = <1>;
 181
 182                                 vga_bridge_out: endpoint {
 183                                         remote-endpoint = <&vga_con_in>;
 184                                 };
 185                         };
 186                 };
 187         };
 188
 189         vga {
 190                 /*
 191                  * This DDC I2C is connected directly to the DVI portions
 192                  * of the connector, so it's not really working when the
 193                  * monitor is connected to the VGA connector.
 194                  */
 195                 compatible = "vga-connector";
 196                 ddc-i2c-bus = <&i2c1>;
 197
 198                 port {
 199                         vga_con_in: endpoint {
 200                                 remote-endpoint = <&vga_bridge_out>;
 201                         };
 202                 };
 203         };
 204
 205         soc: soc@0 {
 206                 compatible = "arm,realview-pbx-soc", "simple-bus";
 207                 #address-cells = <1>;
 208                 #size-cells = <1>;
 209                 regmap = <&syscon>;
 210                 ranges;
 211
 212                 syscon: syscon@10000000 {
 213                         compatible = "arm,realview-pbx-syscon", "syscon", "simple-mfd";
 214                         reg = <0x10000000 0x1000>;
 215
 216                         led@08.0 {
 217                                 compatible = "register-bit-led";
 218                                 offset = <0x08>;
 219                                 mask = <0x01>;
 220                                 label = "versatile:0";
 221                                 linux,default-trigger = "heartbeat";
 222                                 default-state = "on";
 223                         };
 224                         led@08.1 {
 225                                 compatible = "register-bit-led";
 226                                 offset = <0x08>;
 227                                 mask = <0x02>;
 228                                 label = "versatile:1";
 229                                 linux,default-trigger = "mmc0";
 230                                 default-state = "off";
 231                         };
 232                         led@08.2 {
 233                                 compatible = "register-bit-led";
 234                                 offset = <0x08>;
 235                                 mask = <0x04>;
 236                                 label = "versatile:2";
 237                                 linux,default-trigger = "cpu0";
 238                                 default-state = "off";
 239                         };
 240                         led@08.3 {
 241                                 compatible = "register-bit-led";
 242                                 offset = <0x08>;
 243                                 mask = <0x08>;
 244                                 label = "versatile:3";
 245                                 default-state = "off";
 246                         };
 247                         led@08.4 {
 248                                 compatible = "register-bit-led";
 249                                 offset = <0x08>;
 250                                 mask = <0x10>;
 251                                 label = "versatile:4";
 252                                 default-state = "off";
 253                         };
 254                         led@08.5 {
 255                                 compatible = "register-bit-led";
 256                                 offset = <0x08>;
 257                                 mask = <0x20>;
 258                                 label = "versatile:5";
 259                                 default-state = "off";
 260                         };
 261                         led@08.6 {
 262                                 compatible = "register-bit-led";
 263                                 offset = <0x08>;
 264                                 mask = <0x40>;
 265                                 label = "versatile:6";
 266                                 default-state = "off";
 267                         };
 268                         led@08.7 {
 269                                 compatible = "register-bit-led";
 270                                 offset = <0x08>;
 271                                 mask = <0x80>;
 272                                 label = "versatile:7";
 273                                 default-state = "off";
 274                         };
 275                         oscclk0: osc0@0c {
 276                                 compatible = "arm,syscon-icst307";
 277                                 #clock-cells = <0>;
 278                                 lock-offset = <0x20>;
 279                                 vco-offset = <0x0C>;
 280                                 clocks = <&xtal24mhz>;
 281                         };
 282                         oscclk1: osc1@10 {
 283                                 compatible = "arm,syscon-icst307";
 284                                 #clock-cells = <0>;
 285                                 lock-offset = <0x20>;
 286                                 vco-offset = <0x10>;
 287                                 clocks = <&xtal24mhz>;
 288                         };
 289                         oscclk2: osc2@14 {
 290                                 compatible = "arm,syscon-icst307";
 291                                 #clock-cells = <0>;
 292                                 lock-offset = <0x20>;
 293                                 vco-offset = <0x14>;
 294                                 clocks = <&xtal24mhz>;
 295                         };
 296                         oscclk3: osc3@18 {
 297                                 compatible = "arm,syscon-icst307";
 298                                 #clock-cells = <0>;
 299                                 lock-offset = <0x20>;
 300                                 vco-offset = <0x18>;
 301                                 clocks = <&xtal24mhz>;
 302                         };
 303                         oscclk4: osc4@1c {
 304                                 compatible = "arm,syscon-icst307";
 305                                 #clock-cells = <0>;
 306                                 lock-offset = <0x20>;
 307                                 vco-offset = <0x1c>;
 308                                 clocks = <&xtal24mhz>;
 309                         };
 310                 };
 311
 312                 sp810_syscon0: sysctl@10001000 {
 313                         compatible = "arm,sp810", "arm,primecell";
 314                         reg = <0x10001000 0x1000>;
 315                         clocks = <&refclk32khz>, <&timclk>, <&xtal24mhz>;
 316                         clock-names = "refclk", "timclk", "apb_pclk";
 317                         #clock-cells = <1>;
 318                         clock-output-names = "timerclk0",
 319                                              "timerclk1",
 320                                              "timerclk2",
 321                                              "timerclk3";
 322                         assigned-clocks = <&sp810_syscon0 0>,
 323                                           <&sp810_syscon0 1>,
 324                                           <&sp810_syscon0 2>,
 325                                           <&sp810_syscon0 3>;
 326                         assigned-clock-parents = <&timclk>,
 327                                                <&timclk>,
 328                                                <&timclk>,
 329                                                <&timclk>;
 330                 };
 331
 332                 i2c0: i2c@10002000 {
 333                         #address-cells = <1>;
 334                         #size-cells = <0>;
 335                         compatible = "arm,versatile-i2c";
 336                         reg = <0x10002000 0x1000>;
 337
 338                         rtc@68 {
 339                                 compatible = "dallas,ds1338";
 340                                 reg = <0x68>;
 341                         };
 342                 };
 343
 344                 serial0: serial@10009000 {
 345                         compatible = "arm,pl011", "arm,primecell";
 346                         reg = <0x10009000 0x1000>;
 347                         clocks = <&uartclk>, <&pclk>;
 348                         clock-names = "uartclk", "apb_pclk";
 349                 };
 350
 351                 serial1: serial@1000a000 {
 352                         compatible = "arm,pl011", "arm,primecell";
 353                         reg = <0x1000a000 0x1000>;
 354                         clocks = <&uartclk>, <&pclk>;
 355                         clock-names = "uartclk", "apb_pclk";
 356                 };
 357
 358                 serial2: serial@1000b000 {
 359                         compatible = "arm,pl011", "arm,primecell";
 360                         reg = <0x1000b000 0x1000>;
 361                         clocks = <&uartclk>, <&pclk>;
 362                         clock-names = "uartclk", "apb_pclk";
 363                 };
 364
 365                 ssp: spi@1000d000 {
 366                         compatible = "arm,pl022", "arm,primecell";
 367                         reg = <0x1000d000 0x1000>;
 368                         clocks = <&sspclk>, <&pclk>;
 369                         clock-names = "SSPCLK", "apb_pclk";
 370                 };
 371
 372                 wdog0: watchdog@1000f000 {
 373                         compatible = "arm,sp805", "arm,primecell";
 374                         reg = <0x1000f000 0x1000>;
 375                         clocks = <&wdogclk>, <&pclk>;
 376                         clock-names = "wdogclk", "apb_pclk";
 377                         status = "disabled";
 378                 };
 379
 380                 wdog1: watchdog@10010000 {
 381                         compatible = "arm,sp805", "arm,primecell";
 382                         reg = <0x10010000 0x1000>;
 383                         clocks = <&wdogclk>, <&pclk>;
 384                         clock-names = "wdogclk", "apb_pclk";
 385                         status = "disabled";
 386                 };
 387
 388                 timer01: timer@10011000 {
 389                         compatible = "arm,sp804", "arm,primecell";
 390                         reg = <0x10011000 0x1000>;
 391                         clocks = <&sp810_syscon0 0>,
 392                                  <&sp810_syscon0 1>,
 393                                  <&pclk>;
 394                         clock-names = "timerclk0",
 395                                     "timerclk1",
 396                                     "apb_pclk";
 397                 };
 398
 399                 timer23: timer@10012000 {
 400                         compatible = "arm,sp804", "arm,primecell";
 401                         reg = <0x10012000 0x1000>;
 402                         clocks = <&sp810_syscon0 2>,
 403                                  <&sp810_syscon0 3>,
 404                                  <&pclk>;
 405                         clock-names = "timerclk2",
 406                                     "timerclk3",
 407                                     "apb_pclk";
 408                 };
 409
 410                 gpio0: gpio@10013000 {
 411                         compatible = "arm,pl061", "arm,primecell";
 412                         reg = <0x10013000 0x1000>;
 413                         gpio-controller;
 414                         #gpio-cells = <2>;
 415                         interrupt-controller;
 416                         #interrupt-cells = <2>;
 417                         clocks = <&pclk>;
 418                         clock-names = "apb_pclk";
 419                 };
 420
 421                 gpio1: gpio@10014000 {
 422                         compatible = "arm,pl061", "arm,primecell";
 423                         reg = <0x10014000 0x1000>;
 424                         gpio-controller;
 425                         #gpio-cells = <2>;
 426                         interrupt-controller;
 427                         #interrupt-cells = <2>;
 428                         clocks = <&pclk>;
 429                         clock-names = "apb_pclk";
 430                 };
 431
 432                 gpio2: gpio@10015000 {
 433                         compatible = "arm,pl061", "arm,primecell";
 434                         reg = <0x10015000 0x1000>;
 435                         gpio-controller;
 436                         #gpio-cells = <2>;
 437                         interrupt-controller;
 438                         #interrupt-cells = <2>;
 439                         clocks = <&pclk>;
 440                         clock-names = "apb_pclk";
 441                 };
 442
 443                 i2c1: i2c@10016000 {
 444                         #address-cells = <1>;
 445                         #size-cells = <0>;
 446                         compatible = "arm,versatile-i2c";
 447                         reg = <0x10016000 0x1000>;
 448                 };
 449
 450                 rtc: rtc@10017000 {
 451                         compatible = "arm,pl031", "arm,primecell";
 452                         reg = <0x10017000 0x1000>;
 453                         clocks = <&pclk>;
 454                         clock-names = "apb_pclk";
 455                 };
 456
 457                 timer45: timer@10018000 {
 458                         compatible = "arm,sp804", "arm,primecell";
 459                         reg = <0x10018000 0x1000>;
 460                         clocks = <&timclk>, <&timclk>, <&pclk>;
 461                         clock-names = "timerclk4", "timerclk5", "apb_pclk";
 462                 };
 463
 464                 timer67: timer@10019000 {
 465                         compatible = "arm,sp804", "arm,primecell";
 466                         reg = <0x10019000 0x1000>;
 467                         clocks = <&timclk>, <&timclk>, <&pclk>;
 468                         clock-names = "timerclk6", "timerclk7", "apb_pclk";
 469                 };
 470
 471                 sp810_syscon1: sysctl@1001a000 {
 472                         compatible = "arm,sp810", "arm,primecell";
 473                         reg = <0x1001a000 0x1000>;
 474                         clocks = <&refclk32khz>, <&timclk>, <&xtal24mhz>;
 475                         clock-names = "refclk", "timclk", "apb_pclk";
 476                         #clock-cells = <1>;
 477                         clock-output-names = "timerclk4",
 478                                              "timerclk5",
 479                                              "timerclk6",
 480                                              "timerclk7";
 481                         assigned-clocks = <&sp810_syscon1 0>,
 482                                           <&sp810_syscon1 1>,
 483                                           <&sp810_syscon1 2>,
 484                                           <&sp810_syscon1 3>;
 485                         assigned-clock-parents = <&timclk>,
 486                                                <&timclk>,
 487                                                <&timclk>,
 488                                                <&timclk>;
 489                 };
 490         };
 491
 492
 493         /* These peripherals are inside the FPGA */
 494         fpga {
 495                 #address-cells = <1>;
 496                 #size-cells = <1>;
 497                 compatible = "simple-bus";
 498                 ranges;
 499
 500                 aaci: aaci@10004000 {
 501                         compatible = "arm,pl041", "arm,primecell";
 502                         reg = <0x10004000 0x1000>;
 503                         clocks = <&pclk>;
 504                         clock-names = "apb_pclk";
 505                 };
 506
 507                 mmc: mmcsd@10005000 {
 508                         compatible = "arm,pl18x", "arm,primecell";
 509                         reg = <0x10005000 0x1000>;
 510
 511                         /* Due to frequent FIFO overruns, use just 500 kHz */
 512                         max-frequency = <500000>;
 513                         bus-width = <4>;
 514                         cap-sd-highspeed;
 515                         cap-mmc-highspeed;
 516                         clocks = <&mclk>, <&pclk>;
 517                         clock-names = "mclk", "apb_pclk";
 518                         vmmc-supply = <&vmmc>;
 519                         cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
 520                         wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
 521                 };
 522
 523                 kmi0: kmi@10006000 {
 524                         compatible = "arm,pl050", "arm,primecell";
 525                         reg = <0x10006000 0x1000>;
 526                         clocks = <&kmiclk>, <&pclk>;
 527                         clock-names = "KMIREFCLK", "apb_pclk";
 528                 };
 529
 530                 kmi1: kmi@10007000 {
 531                         compatible = "arm,pl050", "arm,primecell";
 532                         reg = <0x10007000 0x1000>;
 533                         clocks = <&kmiclk>, <&pclk>;
 534                         clock-names = "KMIREFCLK", "apb_pclk";
 535                 };
 536
 537                 serial3: serial@1000c000 {
 538                         compatible = "arm,pl011", "arm,primecell";
 539                         reg = <0x1000c000 0x1000>;
 540                         clocks = <&uartclk>, <&pclk>;
 541                         clock-names = "uartclk", "apb_pclk";
 542                 };
 543         };
 544
 545         /* These peripherals are inside the NEC ISSP */
 546         issp {
 547                 #address-cells = <1>;
 548                 #size-cells = <1>;
 549                 compatible = "simple-bus";
 550                 ranges;
 551
 552                 clcd: clcd@10020000 {
 553                         compatible = "arm,pl111", "arm,primecell";
 554                         reg = <0x10020000 0x1000>;
 555                         interrupt-names = "combined";
 556                         clocks = <&oscclk4>, <&pclk>;
 557                         clock-names = "clcdclk", "apb_pclk";
 558                         /* 1024x768 16bpp @65MHz works fine */
 559                         max-memory-bandwidth = <95000000>;
 560
 561                         port {
 562                                 clcd_pads: endpoint {
 563                                         remote-endpoint = <&vga_bridge_in>;
 564                                         arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
 565                                 };
 566                         };
 567                 };
 568         };
 569 };