arch/arm/boot/dts/arm-realview-pb11mp.dts

   1 /*
   2  * Copyright 2015 Linaro Ltd
   3  *
   4  * Permission is hereby granted, free of charge, to any person obtaining a copy
   5  * of this software and associated documentation files (the "Software"), to deal
   6  * in the Software without restriction, including without limitation the rights
   7  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
   8  * copies of the Software, and to permit persons to whom the Software is
   9  * furnished to do so, subject to the following conditions:
  10  *
  11  * The above copyright notice and this permission notice shall be included in
  12  * all copies or substantial portions of the Software.
  13  *
  14  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  15  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  16  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
  17  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  18  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
  19  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
  20  * THE SOFTWARE.
  21  */
  22
  23 /dts-v1/;
  24 #include <dt-bindings/interrupt-controller/irq.h>
  25 #include <dt-bindings/gpio/gpio.h>
  26
  27 / {
  28         #address-cells = <1>;
  29         #size-cells = <1>;
  30         model = "ARM RealView PB11MPcore";
  31         compatible = "arm,realview-pb11mp";
  32
  33         chosen { };
  34
  35         aliases {
  36                 serial0 = &pb11mp_serial0;
  37                 serial1 = &pb11mp_serial1;
  38                 serial2 = &pb11mp_serial2;
  39                 serial3 = &pb11mp_serial3;
  40         };
  41
  42         memory {
  43                 device_type = "memory";
  44                 /*
  45                  * The PB11MPCore has 512 MiB memory @ 0x70000000
  46                  * and the first 256 are also remapped @ 0x00000000
  47                  */
  48                 reg = <0x70000000 0x20000000>;
  49         };
  50
  51         cpus {
  52                 #address-cells = <1>;
  53                 #size-cells = <0>;
  54                 enable-method = "arm,realview-smp";
  55
  56                 MP11_0: cpu@0 {
  57                         device_type = "cpu";
  58                         compatible = "arm,arm11mpcore";
  59                         reg = <0>;
  60                         next-level-cache = <&L2>;
  61                 };
  62
  63                 MP11_1: cpu@1 {
  64                         device_type = "cpu";
  65                         compatible = "arm,arm11mpcore";
  66                         reg = <1>;
  67                         next-level-cache = <&L2>;
  68                 };
  69
  70                 MP11_2: cpu@2 {
  71                         device_type = "cpu";
  72                         compatible = "arm,arm11mpcore";
  73                         reg = <2>;
  74                         next-level-cache = <&L2>;
  75                 };
  76
  77                 MP11_3: cpu@3 {
  78                         device_type = "cpu";
  79                         compatible = "arm,arm11mpcore";
  80                         reg = <3>;
  81                         next-level-cache = <&L2>;
  82                 };
  83         };
  84
  85         /* Primary TestChip GIC synthesized with the CPU */
  86         intc_tc11mp: interrupt-controller@1f000100 {
  87                 compatible = "arm,tc11mp-gic";
  88                 #interrupt-cells = <3>;
  89                 #address-cells = <1>;
  90                 interrupt-controller;
  91                 reg = <0x1f001000 0x1000>,
  92                       <0x1f000100 0x100>;
  93         };
  94
  95         L2: cache-controller {
  96                 compatible = "arm,l220-cache";
  97                 reg = <0x1f002000 0x1000>;
  98                 interrupt-parent = <&intc_tc11mp>;
  99                 interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>,
 100                              <0 30 IRQ_TYPE_LEVEL_HIGH>,
 101                              <0 31 IRQ_TYPE_LEVEL_HIGH>;
 102                 cache-unified;
 103                 cache-level = <2>;
 104                 /*
 105                  * Override default cache size, sets and
 106                  * associativity as these may be erroneously set
 107                  * up by boot loader(s), probably for safety
 108                  * since th outer sync operation can cause the
 109                  * cache to hang unless disabled.
 110                  */
 111                 cache-size = <1048576>; // 1MB
 112                 cache-sets = <4096>;
 113                 cache-line-size = <32>;
 114                 arm,shared-override;
 115                 arm,parity-enable;
 116                 arm,outer-sync-disable;
 117         };
 118
 119         scu@1f000000 {
 120                 compatible = "arm,arm11mp-scu";
 121                 reg = <0x1f000000 0x100>;
 122         };
 123
 124         timer@1f000600 {
 125                 compatible = "arm,arm11mp-twd-timer";
 126                 reg = <0x1f000600 0x20>;
 127                 interrupt-parent = <&intc_tc11mp>;
 128                 interrupts = <1 13 0xf04>;
 129         };
 130
 131         watchdog@1f000620 {
 132                 compatible = "arm,arm11mp-twd-wdt";
 133                 reg = <0x1f000620 0x20>;
 134                 interrupt-parent = <&intc_tc11mp>;
 135                 interrupts = <1 14 0xf04>;
 136         };
 137
 138         /* PMU with one IRQ line per core */
 139         pmu {
 140                 compatible = "arm,arm11mpcore-pmu";
 141                 interrupt-parent = <&intc_tc11mp>;
 142                 interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>,
 143                              <0 18 IRQ_TYPE_LEVEL_HIGH>,
 144                              <0 19 IRQ_TYPE_LEVEL_HIGH>,
 145                              <0 20 IRQ_TYPE_LEVEL_HIGH>;
 146                 interrupt-affinity = <&MP11_0>, <&MP11_1>, <&MP11_2>, <&MP11_3>;
 147         };
 148
 149         /* The voltage to the MMC card is hardwired at 3.3V */
 150         vmmc: regulator-vmmc {
 151                 compatible = "regulator-fixed";
 152                 regulator-name = "vmmc";
 153                 regulator-min-microvolt = <3300000>;
 154                 regulator-max-microvolt = <3300000>;
 155                 regulator-boot-on;
 156         };
 157
 158         veth: regulator-veth {
 159                 compatible = "regulator-fixed";
 160                 regulator-name = "veth";
 161                 regulator-min-microvolt = <3300000>;
 162                 regulator-max-microvolt = <3300000>;
 163                 regulator-boot-on;
 164         };
 165
 166         xtal24mhz: xtal24mhz@24M {
 167                 #clock-cells = <0>;
 168                 compatible = "fixed-clock";
 169                 clock-frequency = <24000000>;
 170         };
 171
 172         refclk32khz: refclk32khz {
 173                 compatible = "fixed-clock";
 174                 #clock-cells = <0>;
 175                 clock-frequency = <32768>;
 176         };
 177
 178         timclk: timclk@1M {
 179                 #clock-cells = <0>;
 180                 compatible = "fixed-factor-clock";
 181                 clock-div = <24>;
 182                 clock-mult = <1>;
 183                 clocks = <&xtal24mhz>;
 184         };
 185
 186         mclk: mclk@24M {
 187                 #clock-cells = <0>;
 188                 compatible = "fixed-factor-clock";
 189                 clock-div = <1>;
 190                 clock-mult = <1>;
 191                 clocks = <&xtal24mhz>;
 192         };
 193
 194         kmiclk: kmiclk@24M {
 195                 #clock-cells = <0>;
 196                 compatible = "fixed-factor-clock";
 197                 clock-div = <1>;
 198                 clock-mult = <1>;
 199                 clocks = <&xtal24mhz>;
 200         };
 201
 202         sspclk: sspclk@24M {
 203                 #clock-cells = <0>;
 204                 compatible = "fixed-factor-clock";
 205                 clock-div = <1>;
 206                 clock-mult = <1>;
 207                 clocks = <&xtal24mhz>;
 208         };
 209
 210         uartclk: uartclk@24M {
 211                 #clock-cells = <0>;
 212                 compatible = "fixed-factor-clock";
 213                 clock-div = <1>;
 214                 clock-mult = <1>;
 215                 clocks = <&xtal24mhz>;
 216         };
 217
 218         wdogclk: wdogclk@24M {
 219                 #clock-cells = <0>;
 220                 compatible = "fixed-factor-clock";
 221                 clock-div = <1>;
 222                 clock-mult = <1>;
 223                 clocks = <&xtal24mhz>;
 224         };
 225
 226         /* FIXME: this actually hangs off the PLL clocks */
 227         pclk: pclk@0 {
 228                 #clock-cells = <0>;
 229                 compatible = "fixed-clock";
 230                 clock-frequency = <0>;
 231         };
 232
 233         flash0@40000000 {
 234                 /* 2 * 32MiB NOR Flash memory */
 235                 compatible = "arm,versatile-flash", "cfi-flash";
 236                 reg = <0x40000000 0x04000000>;
 237                 bank-width = <4>;
 238                 partitions {
 239                         compatible = "arm,arm-firmware-suite";
 240                 };
 241         };
 242
 243         flash1@44000000 {
 244                 // 2 * 32MiB NOR Flash memory
 245                 compatible = "arm,versatile-flash", "cfi-flash";
 246                 reg = <0x44000000 0x04000000>;
 247                 bank-width = <4>;
 248                 partitions {
 249                         compatible = "arm,arm-firmware-suite";
 250                 };
 251         };
 252
 253         bridge {
 254                 compatible = "ti,ths8134a", "ti,ths8134";
 255                 #address-cells = <1>;
 256                 #size-cells = <0>;
 257
 258                 ports {
 259                         #address-cells = <1>;
 260                         #size-cells = <0>;
 261
 262                         port@0 {
 263                                 reg = <0>;
 264
 265                                 vga_bridge_in: endpoint {
 266                                         remote-endpoint = <&clcd_pads>;
 267                                 };
 268                         };
 269
 270                         port@1 {
 271                                 reg = <1>;
 272
 273                                 vga_bridge_out: endpoint {
 274                                         remote-endpoint = <&vga_con_in>;
 275                                 };
 276                         };
 277                 };
 278         };
 279
 280         vga {
 281                 /*
 282                  * This DDC I2C is connected directly to the DVI portions
 283                  * of the connector, so it's not really working when the
 284                  * monitor is connected to the VGA connector.
 285                  */
 286                 compatible = "vga-connector";
 287                 ddc-i2c-bus = <&i2c1>;
 288
 289                 port {
 290                         vga_con_in: endpoint {
 291                                 remote-endpoint = <&vga_bridge_out>;
 292                         };
 293                 };
 294         };
 295
 296         soc {
 297                 #address-cells = <1>;
 298                 #size-cells = <1>;
 299                 compatible = "arm,realview-pb11mp-soc", "simple-bus";
 300                 regmap = <&pb11mp_syscon>;
 301                 ranges;
 302
 303                 pb11mp_syscon: syscon@10000000 {
 304                         compatible = "arm,realview-pb11mp-syscon", "syscon", "simple-mfd";
 305                         reg = <0x10000000 0x1000>;
 306                         ranges = <0x0 0x10000000 0x1000>;
 307                         #address-cells = <1>;
 308                         #size-cells = <1>;
 309
 310                         led@8,0 {
 311                                 compatible = "register-bit-led";
 312                                 reg = <0x08 0x04>;
 313                                 offset = <0x08>;
 314                                 mask = <0x01>;
 315                                 label = "versatile:0";
 316                                 linux,default-trigger = "heartbeat";
 317                                 default-state = "on";
 318                         };
 319                         led@8,1 {
 320                                 compatible = "register-bit-led";
 321                                 reg = <0x08 0x04>;
 322                                 offset = <0x08>;
 323                                 mask = <0x02>;
 324                                 label = "versatile:1";
 325                                 linux,default-trigger = "mmc0";
 326                                 default-state = "off";
 327                         };
 328                         led@8,2 {
 329                                 compatible = "register-bit-led";
 330                                 reg = <0x08 0x04>;
 331                                 offset = <0x08>;
 332                                 mask = <0x04>;
 333                                 label = "versatile:2";
 334                                 linux,default-trigger = "cpu0";
 335                                 default-state = "off";
 336                         };
 337                         led@8,3 {
 338                                 compatible = "register-bit-led";
 339                                 reg = <0x08 0x04>;
 340                                 offset = <0x08>;
 341                                 mask = <0x08>;
 342                                 label = "versatile:3";
 343                                 linux,default-trigger = "cpu1";
 344                                 default-state = "off";
 345                         };
 346                         led@8,4 {
 347                                 compatible = "register-bit-led";
 348                                 reg = <0x08 0x04>;
 349                                 offset = <0x08>;
 350                                 mask = <0x10>;
 351                                 label = "versatile:4";
 352                                 linux,default-trigger = "cpu2";
 353                                 default-state = "off";
 354                         };
 355                         led@8,5 {
 356                                 compatible = "register-bit-led";
 357                                 reg = <0x08 0x04>;
 358                                 offset = <0x08>;
 359                                 mask = <0x20>;
 360                                 label = "versatile:5";
 361                                 linux,default-trigger = "cpu3";
 362                                 default-state = "off";
 363                         };
 364                         led@8,6 {
 365                                 compatible = "register-bit-led";
 366                                 reg = <0x08 0x04>;
 367                                 offset = <0x08>;
 368                                 mask = <0x40>;
 369                                 label = "versatile:6";
 370                                 default-state = "off";
 371                         };
 372                         led@8,7 {
 373                                 compatible = "register-bit-led";
 374                                 reg = <0x08 0x04>;
 375                                 offset = <0x08>;
 376                                 mask = <0x80>;
 377                                 label = "versatile:7";
 378                                 default-state = "off";
 379                         };
 380
 381                         oscclk0: clock-controller@c {
 382                                 compatible = "arm,syscon-icst307";
 383                                 reg = <0x0c 0x04>;
 384                                 #clock-cells = <0>;
 385                                 lock-offset = <0x20>;
 386                                 vco-offset = <0x0C>;
 387                                 clocks = <&xtal24mhz>;
 388                         };
 389                         oscclk1: clock-controller@10 {
 390                                 compatible = "arm,syscon-icst307";
 391                                 reg = <0x10 0x04>;
 392                                 #clock-cells = <0>;
 393                                 lock-offset = <0x20>;
 394                                 vco-offset = <0x10>;
 395                                 clocks = <&xtal24mhz>;
 396                         };
 397                         oscclk2: clock-controller@14 {
 398                                 compatible = "arm,syscon-icst307";
 399                                 reg = <0x14 0x04>;
 400                                 #clock-cells = <0>;
 401                                 lock-offset = <0x20>;
 402                                 vco-offset = <0x14>;
 403                                 clocks = <&xtal24mhz>;
 404                         };
 405                         oscclk3: clock-controller@18 {
 406                                 compatible = "arm,syscon-icst307";
 407                                 reg = <0x18 0x04>;
 408                                 #clock-cells = <0>;
 409                                 lock-offset = <0x20>;
 410                                 vco-offset = <0x18>;
 411                                 clocks = <&xtal24mhz>;
 412                         };
 413                         oscclk4: clock-controller@1c {
 414                                 compatible = "arm,syscon-icst307";
 415                                 reg = <0x1c 0x04>;
 416                                 #clock-cells = <0>;
 417                                 lock-offset = <0x20>;
 418                                 vco-offset = <0x1c>;
 419                                 clocks = <&xtal24mhz>;
 420                         };
 421                         oscclk5: clock-controller@d4 {
 422                                 compatible = "arm,syscon-icst307";
 423                                 reg = <0xd4 0x04>;
 424                                 #clock-cells = <0>;
 425                                 lock-offset = <0x20>;
 426                                 vco-offset = <0xd4>;
 427                                 clocks = <&xtal24mhz>;
 428                         };
 429                         oscclk6: clock-controller@d8 {
 430                                 compatible = "arm,syscon-icst307";
 431                                 reg = <0xd8 0x04>;
 432                                 #clock-cells = <0>;
 433                                 lock-offset = <0x20>;
 434                                 vco-offset = <0xd8>;
 435                                 clocks = <&xtal24mhz>;
 436                         };
 437                 };
 438
 439                 sp810_syscon: sysctl@10001000 {
 440                         compatible = "arm,sp810", "arm,primecell";
 441                         reg = <0x10001000 0x1000>;
 442                         clocks = <&refclk32khz>, <&timclk>, <&xtal24mhz>;
 443                         clock-names = "refclk", "timclk", "apb_pclk";
 444                         #clock-cells = <1>;
 445                         clock-output-names = "timerclk0",
 446                                              "timerclk1",
 447                                              "timerclk2",
 448                                              "timerclk3";
 449                         assigned-clocks = <&sp810_syscon 0>,
 450                                           <&sp810_syscon 1>,
 451                                           <&sp810_syscon 2>,
 452                                           <&sp810_syscon 3>;
 453                         assigned-clock-parents = <&timclk>,
 454                                                <&timclk>,
 455                                                <&timclk>,
 456                                                <&timclk>;
 457                 };
 458
 459                 i2c0: i2c@10002000 {
 460                         #address-cells = <1>;
 461                         #size-cells = <0>;
 462                         compatible = "arm,versatile-i2c";
 463                         reg = <0x10002000 0x1000>;
 464
 465                         rtc@68 {
 466                                 compatible = "dallas,ds1338";
 467                                 reg = <0x68>;
 468                         };
 469                 };
 470
 471                 aaci: aaci@10004000 {
 472                         compatible = "arm,pl041", "arm,primecell";
 473                         reg = <0x10004000 0x1000>;
 474                         interrupt-parent = <&intc_tc11mp>;
 475                         interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
 476                         clocks = <&pclk>;
 477                         clock-names = "apb_pclk";
 478                 };
 479
 480                 mci: mmcsd@10005000 {
 481                         compatible = "arm,pl18x", "arm,primecell";
 482                         reg = <0x10005000 0x1000>;
 483                         interrupt-parent = <&intc_tc11mp>;
 484                         interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>,
 485                                         <0 15 IRQ_TYPE_LEVEL_HIGH>;
 486                         /* Due to frequent FIFO overruns, use just 500 kHz */
 487                         max-frequency = <500000>;
 488                         bus-width = <4>;
 489                         cap-sd-highspeed;
 490                         cap-mmc-highspeed;
 491                         clocks = <&mclk>, <&pclk>;
 492                         clock-names = "mclk", "apb_pclk";
 493                         vmmc-supply = <&vmmc>;
 494                         cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
 495                         wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
 496                 };
 497
 498                 kmi0: kmi@10006000 {
 499                         compatible = "arm,pl050", "arm,primecell";
 500                         reg = <0x10006000 0x1000>;
 501                         interrupt-parent = <&intc_tc11mp>;
 502                         interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
 503                         clocks = <&kmiclk>, <&pclk>;
 504                         clock-names = "KMIREFCLK", "apb_pclk";
 505                 };
 506
 507                 kmi1: kmi@10007000 {
 508                         compatible = "arm,pl050", "arm,primecell";
 509                         reg = <0x10007000 0x1000>;
 510                         interrupt-parent = <&intc_tc11mp>;
 511                         interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
 512                         clocks = <&kmiclk>, <&pclk>;
 513                         clock-names = "KMIREFCLK", "apb_pclk";
 514                 };
 515
 516                 pb11mp_serial0: serial@10009000 {
 517                         compatible = "arm,pl011", "arm,primecell";
 518                         reg = <0x10009000 0x1000>;
 519                         interrupt-parent = <&intc_tc11mp>;
 520                         interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
 521                         clocks = <&uartclk>, <&pclk>;
 522                         clock-names = "uartclk", "apb_pclk";
 523                 };
 524
 525                 pb11mp_serial1: serial@1000a000 {
 526                         compatible = "arm,pl011", "arm,primecell";
 527                         reg = <0x1000a000 0x1000>;
 528                         interrupt-parent = <&intc_tc11mp>;
 529                         interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
 530                         clocks = <&uartclk>, <&pclk>;
 531                         clock-names = "uartclk", "apb_pclk";
 532                 };
 533
 534                 pb11mp_serial2: serial@1000b000 {
 535                         compatible = "arm,pl011", "arm,primecell";
 536                         reg = <0x1000b000 0x1000>;
 537                         interrupt-parent = <&intc_pb11mp>;
 538                         interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
 539                         clocks = <&uartclk>, <&pclk>;
 540                         clock-names = "uartclk", "apb_pclk";
 541                 };
 542
 543                 pb11mp_serial3: serial@1000c000 {
 544                         compatible = "arm,pl011", "arm,primecell";
 545                         reg = <0x1000c000 0x1000>;
 546                         interrupt-parent = <&intc_pb11mp>;
 547                         interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
 548                         clocks = <&uartclk>, <&pclk>;
 549                         clock-names = "uartclk", "apb_pclk";
 550                 };
 551
 552                 spi@1000d000 {
 553                         compatible = "arm,pl022", "arm,primecell";
 554                         reg = <0x1000d000 0x1000>;
 555                         interrupt-parent = <&intc_pb11mp>;
 556                         interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
 557                         clocks = <&sspclk>, <&pclk>;
 558                         clock-names = "sspclk", "apb_pclk";
 559                 };
 560
 561                 watchdog@1000f000 {
 562                         compatible = "arm,sp805", "arm,primecell";
 563                         reg = <0x1000f000 0x1000>;
 564                         interrupt-parent = <&intc_pb11mp>;
 565                         interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
 566                         clocks = <&wdogclk>, <&pclk>;
 567                         clock-names = "wdog_clk", "apb_pclk";
 568                         status = "disabled";
 569                 };
 570
 571                 watchdog@10010000 {
 572                         compatible = "arm,sp805", "arm,primecell";
 573                         reg = <0x10010000 0x1000>;
 574                         interrupt-parent = <&intc_pb11mp>;
 575                         interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
 576                         clocks = <&wdogclk>, <&pclk>;
 577                         clock-names = "wdog_clk", "apb_pclk";
 578                 };
 579
 580                 timer01: timer@10011000 {
 581                         compatible = "arm,sp804", "arm,primecell";
 582                         reg = <0x10011000 0x1000>;
 583                         interrupt-parent = <&intc_tc11mp>;
 584                         interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH>;
 585                         arm,sp804-has-irq = <1>;
 586                         clocks = <&sp810_syscon 0>,
 587                                  <&sp810_syscon 1>,
 588                                  <&pclk>;
 589                         clock-names = "timer0clk",
 590                                     "timer1clk",
 591                                     "apb_pclk";
 592                 };
 593
 594                 timer23: timer@10012000 {
 595                         compatible = "arm,sp804", "arm,primecell";
 596                         reg = <0x10012000 0x1000>;
 597                         interrupt-parent = <&intc_tc11mp>;
 598                         interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
 599                         arm,sp804-has-irq = <1>;
 600                         clocks = <&sp810_syscon 2>,
 601                                  <&sp810_syscon 3>,
 602                                  <&pclk>;
 603                         clock-names = "timer0clk",
 604                                     "timer1clk",
 605                                     "apb_pclk";
 606                 };
 607
 608                 gpio0: gpio@10013000 {
 609                         compatible = "arm,pl061", "arm,primecell";
 610                         reg = <0x10013000 0x1000>;
 611                         gpio-controller;
 612                         interrupt-parent = <&intc_pb11mp>;
 613                         interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
 614                         #gpio-cells = <2>;
 615                         interrupt-controller;
 616                         #interrupt-cells = <2>;
 617                         clocks = <&pclk>;
 618                         clock-names = "apb_pclk";
 619                 };
 620
 621                 gpio1: gpio@10014000 {
 622                         compatible = "arm,pl061", "arm,primecell";
 623                         reg = <0x10014000 0x1000>;
 624                         gpio-controller;
 625                         interrupt-parent = <&intc_pb11mp>;
 626                         interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
 627                         #gpio-cells = <2>;
 628                         interrupt-controller;
 629                         #interrupt-cells = <2>;
 630                         clocks = <&pclk>;
 631                         clock-names = "apb_pclk";
 632                 };
 633
 634                 gpio2: gpio@10015000 {
 635                         compatible = "arm,pl061", "arm,primecell";
 636                         reg = <0x10015000 0x1000>;
 637                         gpio-controller;
 638                         interrupt-parent = <&intc_pb11mp>;
 639                         interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
 640                         #gpio-cells = <2>;
 641                         interrupt-controller;
 642                         #interrupt-cells = <2>;
 643                         clocks = <&pclk>;
 644                         clock-names = "apb_pclk";
 645                 };
 646
 647                 i2c1: i2c@10016000 {
 648                         #address-cells = <1>;
 649                         #size-cells = <0>;
 650                         compatible = "arm,versatile-i2c";
 651                         reg = <0x10016000 0x1000>;
 652                 };
 653
 654                 rtc: rtc@10017000 {
 655                         compatible = "arm,pl031", "arm,primecell";
 656                         reg = <0x10017000 0x1000>;
 657                         interrupt-parent = <&intc_tc11mp>;
 658                         interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
 659                         clocks = <&pclk>;
 660                         clock-names = "apb_pclk";
 661                 };
 662
 663                 timer45: timer@10018000 {
 664                         compatible = "arm,sp804", "arm,primecell";
 665                         reg = <0x10018000 0x1000>;
 666                         clocks = <&timclk>, <&timclk>, <&pclk>;
 667                         clock-names = "timer0clk", "timer1clk", "apb_pclk";
 668                         status = "disabled";
 669                 };
 670
 671                 timer67: timer@10019000 {
 672                         compatible = "arm,sp804", "arm,primecell";
 673                         reg = <0x10019000 0x1000>;
 674                         clocks = <&timclk>, <&timclk>, <&pclk>;
 675                         clock-names = "timer0clk", "timer1clk", "apb_pclk";
 676                         status = "disabled";
 677                 };
 678
 679
 680                 clcd@10020000 {
 681                         compatible = "arm,pl111", "arm,primecell";
 682                         reg = <0x10020000 0x1000>;
 683                         interrupt-parent = <&intc_pb11mp>;
 684                         interrupt-names = "combined";
 685                         interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
 686                         clocks = <&oscclk4>, <&pclk>;
 687                         clock-names = "clcdclk", "apb_pclk";
 688                         /* 1024x768 16bpp @65MHz works fine */
 689                         max-memory-bandwidth = <95000000>;
 690
 691                         port {
 692                                 clcd_pads: endpoint {
 693                                         remote-endpoint = <&vga_bridge_in>;
 694                                         arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
 695                                 };
 696                         };
 697                 };
 698
 699                 /*
 700                  * This GIC on the Platform Baseboard is cascaded off the
 701                  * TestChip GIC
 702                  */
 703                 intc_pb11mp: interrupt-controller@1e000000 {
 704                         compatible = "arm,arm11mp-gic";
 705                         #interrupt-cells = <3>;
 706                         #address-cells = <1>;
 707                         interrupt-controller;
 708                         reg = <0x1e001000 0x1000>,
 709                               <0x1e000000 0x100>;
 710                         interrupt-parent = <&intc_tc11mp>;
 711                         interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
 712                 };
 713
 714                 /* SMSC 9118 ethernet with PHY and EEPROM */
 715                 ethernet@4e000000 {
 716                         compatible = "smsc,lan9118", "smsc,lan9115";
 717                         reg = <0x4e000000 0x10000>;
 718                         interrupt-parent = <&intc_tc11mp>;
 719                         interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
 720                         phy-mode = "mii";
 721                         reg-io-width = <4>;
 722                         smsc,irq-active-high;
 723                         smsc,irq-push-pull;
 724                         vdd33a-supply = <&veth>;
 725                         vddvario-supply = <&veth>;
 726                 };
 727
 728                 usb@4f000000 {
 729                         compatible = "nxp,usb-isp1761";
 730                         reg = <0x4f000000 0x20000>;
 731                         interrupt-parent = <&intc_tc11mp>;
 732                         interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>;
 733                         dr_mode = "peripheral";
 734                 };
 735         };
 736 };