arch/arm/boot/dts/am572x-idk-common.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
   4  */
   5
   6 #include <dt-bindings/gpio/gpio.h>
   7 #include <dt-bindings/interrupt-controller/irq.h>
   8 #include "am57xx-idk-common.dtsi"
   9
  10 / {
  11         memory@0 {
  12                 device_type = "memory";
  13                 reg = <0x0 0x80000000 0x0 0x80000000>;
  14         };
  15
  16         status-leds {
  17                 compatible = "gpio-leds";
  18                 cpu0-led {
  19                         label = "status0:red:cpu0";
  20                         gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
  21                         default-state = "off";
  22                         linux,default-trigger = "cpu0";
  23                 };
  24
  25                 usr0-led {
  26                         label = "status0:green:usr";
  27                         gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>;
  28                         default-state = "off";
  29                 };
  30
  31                 heartbeat-led {
  32                         label = "status0:blue:heartbeat";
  33                         gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
  34                         default-state = "off";
  35                         linux,default-trigger = "heartbeat";
  36                 };
  37
  38                 cpu1-led {
  39                         label = "status1:red:cpu1";
  40                         gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>;
  41                         default-state = "off";
  42                         linux,default-trigger = "cpu1";
  43                 };
  44
  45                 usr1-led {
  46                         label = "status1:green:usr";
  47                         gpios = <&gpio7 23 GPIO_ACTIVE_HIGH>;
  48                         default-state = "off";
  49                 };
  50
  51                 mmc0-led {
  52                         label = "status1:blue:mmc0";
  53                         gpios = <&gpio7 22 GPIO_ACTIVE_HIGH>;
  54                         default-state = "off";
  55                         linux,default-trigger = "mmc0";
  56                 };
  57         };
  58 };
  59
  60 &extcon_usb2 {
  61         id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
  62         vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>;
  63 };
  64
  65 &sn65hvs882 {
  66         load-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
  67 };
  68
  69 &pcie1_rc {
  70         status = "okay";
  71         gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
  72 };
  73
  74 &mailbox5 {
  75         status = "okay";
  76         mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
  77                 status = "okay";
  78         };
  79         mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
  80                 status = "okay";
  81         };
  82 };
  83
  84 &mailbox6 {
  85         status = "okay";
  86         mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
  87                 status = "okay";
  88         };
  89         mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
  90                 status = "okay";
  91         };
  92 };