arch/arm/boot/dts/am43x-epos-evm.dts

   1 /*
   2  * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  */
   8
   9 /* AM43x EPOS EVM */
  10
  11 /dts-v1/;
  12
  13 #include "am4372.dtsi"
  14 #include <dt-bindings/pinctrl/am43xx.h>
  15 #include <dt-bindings/gpio/gpio.h>
  16 #include <dt-bindings/pwm/pwm.h>
  17 #include <dt-bindings/sound/tlv320aic31xx-micbias.h>
  18
  19 / {
  20         model = "TI AM43x EPOS EVM";
  21         compatible = "ti,am43x-epos-evm","ti,am438x","ti,am43";
  22
  23         aliases {
  24                 display0 = &lcd0;
  25         };
  26
  27         chosen {
  28                 stdout-path = &uart0;
  29         };
  30
  31         vmmcsd_fixed: fixedregulator-sd {
  32                 compatible = "regulator-fixed";
  33                 regulator-name = "vmmcsd_fixed";
  34                 regulator-min-microvolt = <3300000>;
  35                 regulator-max-microvolt = <3300000>;
  36                 enable-active-high;
  37         };
  38
  39         vbat: fixedregulator0 {
  40                 compatible = "regulator-fixed";
  41                 regulator-name = "vbat";
  42                 regulator-min-microvolt = <5000000>;
  43                 regulator-max-microvolt = <5000000>;
  44                 regulator-boot-on;
  45         };
  46
  47         lcd0: display {
  48                 compatible = "osddisplays,osd070t1718-19ts", "panel-dpi";
  49                 label = "lcd";
  50
  51                 backlight = <&lcd_bl>;
  52
  53                 panel-timing {
  54                         clock-frequency = <33000000>;
  55                         hactive = <800>;
  56                         vactive = <480>;
  57                         hfront-porch = <210>;
  58                         hback-porch = <16>;
  59                         hsync-len = <30>;
  60                         vback-porch = <10>;
  61                         vfront-porch = <22>;
  62                         vsync-len = <13>;
  63                         hsync-active = <0>;
  64                         vsync-active = <0>;
  65                         de-active = <1>;
  66                         pixelclk-active = <1>;
  67                 };
  68
  69                 port {
  70                         lcd_in: endpoint {
  71                                 remote-endpoint = <&dpi_out>;
  72                         };
  73                 };
  74         };
  75
  76         matrix_keypad: matrix_keypad0 {
  77                 compatible = "gpio-matrix-keypad";
  78                 debounce-delay-ms = <5>;
  79                 col-scan-delay-us = <2>;
  80                 pinctrl-names = "default", "sleep";
  81                 pinctrl-0 = <&matrix_keypad_default>;
  82                 pinctrl-1 = <&matrix_keypad_sleep>;
  83
  84                 row-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH         /* Bank0, pin12 */
  85                              &gpio0 13 GPIO_ACTIVE_HIGH         /* Bank0, pin13 */
  86                              &gpio0 14 GPIO_ACTIVE_HIGH         /* Bank0, pin14 */
  87                              &gpio0 15 GPIO_ACTIVE_HIGH>;       /* Bank0, pin15 */
  88
  89                 col-gpios = <&gpio3 9 GPIO_ACTIVE_HIGH          /* Bank3, pin9 */
  90                              &gpio3 10 GPIO_ACTIVE_HIGH         /* Bank3, pin10 */
  91                              &gpio2 18 GPIO_ACTIVE_HIGH         /* Bank2, pin18 */
  92                              &gpio2 19 GPIO_ACTIVE_HIGH>;       /* Bank2, pin19 */
  93
  94                 linux,keymap = <0x00000201      /* P1 */
  95                         0x01000204      /* P4 */
  96                         0x02000207      /* P7 */
  97                         0x0300020a      /* NUMERIC_STAR */
  98                         0x00010202      /* P2 */
  99                         0x01010205      /* P5 */
 100                         0x02010208      /* P8 */
 101                         0x03010200      /* P0 */
 102                         0x00020203      /* P3 */
 103                         0x01020206      /* P6 */
 104                         0x02020209      /* P9 */
 105                         0x0302020b      /* NUMERIC_POUND */
 106                         0x00030067      /* UP */
 107                         0x0103006a      /* RIGHT */
 108                         0x0203006c      /* DOWN */
 109                         0x03030069>;    /* LEFT */
 110         };
 111
 112         lcd_bl: backlight {
 113                 compatible = "pwm-backlight";
 114                 pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
 115                 brightness-levels = <0 51 53 56 62 75 101 152 255>;
 116                 default-brightness-level = <8>;
 117         };
 118
 119         sound0: sound0 {
 120                 compatible = "simple-audio-card";
 121                 simple-audio-card,name = "AM43-EPOS-EVM";
 122                 simple-audio-card,widgets =
 123                         "Microphone", "Microphone Jack",
 124                         "Headphone", "Headphone Jack",
 125                         "Speaker", "Speaker";
 126                 simple-audio-card,routing =
 127                         "MIC1LP", "Microphone Jack",
 128                         "MIC1RP", "Microphone Jack",
 129                         "MIC1LP", "MICBIAS",
 130                         "MIC1RP", "MICBIAS",
 131                         "Headphone Jack", "HPL",
 132                         "Headphone Jack", "HPR",
 133                         "Speaker", "SPL",
 134                         "Speaker", "SPR";
 135                 simple-audio-card,format = "dsp_b";
 136                 simple-audio-card,bitclock-master = <&sound0_master>;
 137                 simple-audio-card,frame-master = <&sound0_master>;
 138                 simple-audio-card,bitclock-inversion;
 139
 140                 simple-audio-card,cpu {
 141                         sound-dai = <&mcasp1>;
 142                         system-clock-frequency = <12000000>;
 143                 };
 144
 145                 sound0_master: simple-audio-card,codec {
 146                         sound-dai = <&tlv320aic3111>;
 147                         system-clock-frequency = <12000000>;
 148                 };
 149         };
 150 };
 151
 152 &am43xx_pinmux {
 153                 pinctrl-names = "default";
 154                 pinctrl-0 = <&unused_pins>;
 155
 156                 unused_pins: unused_pins {
 157                         pinctrl-single,pins = <
 158                                 AM4372_IOPAD(0x848, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7)
 159                                 AM4372_IOPAD(0x850, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
 160                                 AM4372_IOPAD(0x858, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
 161                                 AM4372_IOPAD(0x860, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
 162                                 AM4372_IOPAD(0x864, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
 163                                 AM4372_IOPAD(0x868, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
 164                                 AM4372_IOPAD(0x86c, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
 165                                 AM4372_IOPAD(0x878, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7)
 166                                 AM4372_IOPAD(0x908, DS0_PIN_INPUT_PULLDOWN | PIN_INPUT_PULLDOWN | MUX_MODE7)
 167                                 AM4372_IOPAD(0x91c, DS0_PIN_OUTPUT_PULLDOWN | PIN_OUTPUT_PULLDOWN | MUX_MODE7)
 168                                 AM4372_IOPAD(0x920, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
 169                                 AM4372_IOPAD(0x9e0, DS0_PIN_INPUT_PULLDOWN | PIN_INPUT_PULLDOWN | MUX_MODE7)
 170                                 AM4372_IOPAD(0xA0c, DS0_PIN_OUTPUT_PULLDOWN | PIN_OUTPUT_PULLDOWN | MUX_MODE7)
 171                                 AM4372_IOPAD(0xA38, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
 172                                 AM4372_IOPAD(0xA3c, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
 173                                 AM4372_IOPAD(0xA40, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
 174                                 AM4372_IOPAD(0xA44, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
 175                                 AM4372_IOPAD(0xA48, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
 176                                 AM4372_IOPAD(0xA4c, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
 177                                 AM4372_IOPAD(0xA50, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
 178                                 AM4372_IOPAD(0xA54, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
 179                                 AM4372_IOPAD(0xA58, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
 180                                 AM4372_IOPAD(0xA5c, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
 181                                 AM4372_IOPAD(0xA60, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
 182                                 AM4372_IOPAD(0xA64, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7)
 183                                 AM4372_IOPAD(0xA68, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
 184                                 AM4372_IOPAD(0xA6C, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
 185                                 AM4372_IOPAD(0xA74, DS0_PIN_INPUT_PULLDOWN | PIN_INPUT_PULLDOWN | MUX_MODE7)
 186                                 AM4372_IOPAD(0xA78, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
 187                         >;
 188                 };
 189
 190                 cpsw_default: cpsw_default {
 191                         pinctrl-single,pins = <
 192                                 /* Slave 1 */
 193                                 AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1)     /* mii1_crs.rmii1_crs */
 194                                 AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE1)     /* mii1_rxerr.rmii1_rxerr */
 195                                 AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1)    /* mii1_txen.rmii1_txen */
 196                                 AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE1)     /* mii1_rxdv.rmii1_rxdv */
 197                                 AM4372_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1)    /* mii1_txd1.rmii1_txd1 */
 198                                 AM4372_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1)    /* mii1_txd0.rmii1_txd0 */
 199                                 AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE1)     /* mii1_rxd1.rmii1_rxd1 */
 200                                 AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE1)     /* mii1_rxd0.rmii1_rxd0 */
 201                                 AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0)     /* rmii1_refclk.rmii1_refclk */
 202                         >;
 203                 };
 204
 205                 cpsw_sleep: cpsw_sleep {
 206                         pinctrl-single,pins = <
 207                                 /* Slave 1 reset value */
 208                                 AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 209                                 AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
 210                                 AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
 211                                 AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
 212                                 AM4372_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
 213                                 AM4372_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
 214                                 AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 215                                 AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
 216                                 AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
 217                         >;
 218                 };
 219
 220                 davinci_mdio_default: davinci_mdio_default {
 221                         pinctrl-single,pins = <
 222                                 /* MDIO */
 223                                 AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)       /* mdio_data.mdio_data */
 224                                 AM4372_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)                      /* mdio_clk.mdio_clk */
 225                         >;
 226                 };
 227
 228                 davinci_mdio_sleep: davinci_mdio_sleep {
 229                         pinctrl-single,pins = <
 230                                 /* MDIO reset value */
 231                                 AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
 232                                 AM4372_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 233                         >;
 234                 };
 235
 236                 i2c0_pins: pinmux_i2c0_pins {
 237                         pinctrl-single,pins = <
 238                                 AM4372_IOPAD(0x988, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)       /* i2c0_sda.i2c0_sda */
 239                                 AM4372_IOPAD(0x98c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)       /* i2c0_scl.i2c0_scl */
 240                         >;
 241                 };
 242
 243                 nand_flash_x8_default: nand_flash_x8_default {
 244                         pinctrl-single,pins = <
 245                                 AM4372_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE7)    /* gpmc_a0.SELQSPIorNAND/GPIO */
 246                                 AM4372_IOPAD(0x800, PIN_INPUT_PULLDOWN | MUX_MODE0)     /* gpmc_ad0.gpmc_ad0 */
 247                                 AM4372_IOPAD(0x804, PIN_INPUT_PULLDOWN | MUX_MODE0)     /* gpmc_ad1.gpmc_ad1 */
 248                                 AM4372_IOPAD(0x808, PIN_INPUT_PULLDOWN | MUX_MODE0)     /* gpmc_ad2.gpmc_ad2 */
 249                                 AM4372_IOPAD(0x80c, PIN_INPUT_PULLDOWN | MUX_MODE0)     /* gpmc_ad3.gpmc_ad3 */
 250                                 AM4372_IOPAD(0x810, PIN_INPUT_PULLDOWN | MUX_MODE0)     /* gpmc_ad4.gpmc_ad4 */
 251                                 AM4372_IOPAD(0x814, PIN_INPUT_PULLDOWN | MUX_MODE0)     /* gpmc_ad5.gpmc_ad5 */
 252                                 AM4372_IOPAD(0x818, PIN_INPUT_PULLDOWN | MUX_MODE0)     /* gpmc_ad6.gpmc_ad6 */
 253                                 AM4372_IOPAD(0x81c, PIN_INPUT_PULLDOWN | MUX_MODE0)     /* gpmc_ad7.gpmc_ad7 */
 254                                 AM4372_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)       /* gpmc_wait0.gpmc_wait0 */
 255                                 AM4372_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE7)      /* gpmc_wpn.gpmc_wpn */
 256                                 AM4372_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)             /* gpmc_csn0.gpmc_csn0  */
 257                                 AM4372_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)             /* gpmc_advn_ale.gpmc_advn_ale */
 258                                 AM4372_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)             /* gpmc_oen_ren.gpmc_oen_ren */
 259                                 AM4372_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)             /* gpmc_wen.gpmc_wen */
 260                                 AM4372_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)             /* gpmc_be0n_cle.gpmc_be0n_cle */
 261                         >;
 262                 };
 263
 264                 nand_flash_x8_sleep: nand_flash_x8_sleep {
 265                         pinctrl-single,pins = <
 266                                 AM4372_IOPAD(0x840, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
 267                                 AM4372_IOPAD(0x800, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
 268                                 AM4372_IOPAD(0x804, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
 269                                 AM4372_IOPAD(0x808, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
 270                                 AM4372_IOPAD(0x80c, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
 271                                 AM4372_IOPAD(0x810, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
 272                                 AM4372_IOPAD(0x814, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
 273                                 AM4372_IOPAD(0x818, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
 274                                 AM4372_IOPAD(0x81c, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
 275                                 AM4372_IOPAD(0x870, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
 276                                 AM4372_IOPAD(0x874, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
 277                                 AM4372_IOPAD(0x87c, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
 278                                 AM4372_IOPAD(0x890, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
 279                                 AM4372_IOPAD(0x894, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
 280                                 AM4372_IOPAD(0x898, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
 281                                 AM4372_IOPAD(0x89c, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
 282                         >;
 283                 };
 284
 285                 ecap0_pins_default: backlight_pins_default {
 286                         pinctrl-single,pins = <
 287                                 AM4372_IOPAD(0x964, MUX_MODE0)         /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
 288                         >;
 289                 };
 290
 291                 ecap0_pins_sleep: backlight_pins_sleep {
 292                         pinctrl-single,pins = <
 293                                 AM4372_IOPAD(0x964, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
 294                         >;
 295                 };
 296
 297                 i2c2_pins: pinmux_i2c2_pins {
 298                         pinctrl-single,pins = <
 299                                 AM4372_IOPAD(0x9c0, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8)    /* i2c2_sda.i2c2_sda */
 300                                 AM4372_IOPAD(0x9c4, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8)    /* i2c2_scl.i2c2_scl */
 301                         >;
 302                 };
 303
 304                 spi0_pins_default: pinmux_spi0_pins_default {
 305                         pinctrl-single,pins = <
 306                                 AM4372_IOPAD(0x950, PIN_INPUT | MUX_MODE0)           /* spi0_clk.spi0_clk */
 307                                 AM4372_IOPAD(0x954, PIN_OUTPUT | MUX_MODE0)           /* spi0_d0.spi0_d0 */
 308                                 AM4372_IOPAD(0x958, PIN_INPUT | MUX_MODE0)           /* spi0_d1.spi0_d1 */
 309                                 AM4372_IOPAD(0x95c, PIN_OUTPUT | MUX_MODE0)          /* spi0_cs0.spi0_cs0 */
 310                         >;
 311                 };
 312
 313                 spi0_pins_sleep: pinmux_spi0_pins_sleep {
 314                         pinctrl-single,pins = <
 315                                 AM4372_IOPAD(0x950, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7)
 316                                 AM4372_IOPAD(0x954, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7)
 317                                 AM4372_IOPAD(0x958, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7)
 318                                 AM4372_IOPAD(0x95c, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7)
 319                         >;
 320                 };
 321
 322                 spi1_pins_default: pinmux_spi1_pins_default {
 323                         pinctrl-single,pins = <
 324                                 AM4372_IOPAD(0x990, PIN_INPUT | MUX_MODE3)           /* mcasp0_aclkx.spi1_clk */
 325                                 AM4372_IOPAD(0x994, PIN_OUTPUT | MUX_MODE3)           /* mcasp0_fsx.spi1_d0 */
 326                                 AM4372_IOPAD(0x998, PIN_INPUT | MUX_MODE3)           /* mcasp0_axr0.spi1_d1 */
 327                                 AM4372_IOPAD(0x99c, PIN_OUTPUT | MUX_MODE3)          /* mcasp0_ahclkr.spi1_cs0 */
 328                         >;
 329                 };
 330
 331                 spi1_pins_sleep: pinmux_spi1_pins_sleep {
 332                         pinctrl-single,pins = <
 333                                 AM4372_IOPAD(0x990, DS0_PIN_OUTPUT_PULLDOWN | PIN_OUTPUT_PULLDOWN | MUX_MODE7)
 334                                 AM4372_IOPAD(0x994, DS0_PIN_OUTPUT_PULLDOWN | PIN_OUTPUT_PULLDOWN | MUX_MODE7)
 335                                 AM4372_IOPAD(0x998, DS0_PIN_OUTPUT_PULLDOWN | PIN_OUTPUT_PULLDOWN | MUX_MODE7)
 336                                 AM4372_IOPAD(0x99c, DS0_PIN_OUTPUT_PULLDOWN | PIN_OUTPUT_PULLDOWN | MUX_MODE7)
 337                         >;
 338                 };
 339
 340                 mmc1_pins_default: pinmux_mmc1_pins_default {
 341                         pinctrl-single,pins = <
 342                                 AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
 343                         >;
 344                 };
 345
 346                 mmc1_pins_sleep: pinmux_mmc1_pins_sleep {
 347                         pinctrl-single,pins = <
 348                                 AM4372_IOPAD(0x960, DS0_PIN_OUTPUT_PULLUP | PIN_INPUT | MUX_MODE7)
 349                         >;
 350                 };
 351
 352                 matrix_keypad_default: matrix_keypad_default {
 353                         pinctrl-single,pins = <
 354                                  AM4372_IOPAD(0x92c, PIN_OUTPUT | MUX_MODE7)          /* mii1_tx_clk.gpio3_9 */
 355                                  AM4372_IOPAD(0x930, PIN_OUTPUT | MUX_MODE7)          /* mii1_rx_clk.gpio3_10 */
 356                                  AM4372_IOPAD(0x934, PIN_OUTPUT | MUX_MODE7)          /* mii1_rxd3.gpio2_18 */
 357                                  AM4372_IOPAD(0x938, PIN_OUTPUT | MUX_MODE7)          /* mii1_rxd2.gpio2_19 */
 358                                  AM4372_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE7)  /* uart1_ctsn.gpio0_12 */
 359                                  AM4372_IOPAD(0x97C, PIN_INPUT_PULLDOWN | MUX_MODE7)  /* uart1_rtsn.gpio0_13 */
 360                                  AM4372_IOPAD(0x980, PIN_INPUT_PULLDOWN | MUX_MODE7)  /* uart1_rxd.gpio0_14 */
 361                                  AM4372_IOPAD(0x984, PIN_INPUT_PULLDOWN | MUX_MODE7)  /* uart1_txd.gpio0_15 */
 362                         >;
 363                 };
 364
 365                 matrix_keypad_sleep: matrix_keypad_sleep {
 366                         pinctrl-single,pins = <
 367                                 AM4372_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE7)
 368                                 AM4372_IOPAD(0x930, PIN_INPUT_PULLUP | MUX_MODE7)
 369                                 AM4372_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE7)
 370                                 AM4372_IOPAD(0x938, PIN_INPUT_PULLUP | MUX_MODE7)
 371                                 AM4372_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE7)
 372                                 AM4372_IOPAD(0x97C, PIN_INPUT_PULLDOWN | MUX_MODE7)
 373                                 AM4372_IOPAD(0x980, PIN_INPUT_PULLDOWN | MUX_MODE7)
 374                                 AM4372_IOPAD(0x984, PIN_INPUT_PULLDOWN | MUX_MODE7)
 375                         >;
 376                 };
 377
 378                 qspi1_pins_default: qspi1_pins_default {
 379                         pinctrl-single,pins = <
 380                                 AM4372_IOPAD(0x87c, PIN_INPUT_PULLUP | MUX_MODE3)
 381                                 AM4372_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE2)
 382                                 AM4372_IOPAD(0x890, PIN_INPUT_PULLUP | MUX_MODE3)
 383                                 AM4372_IOPAD(0x894, PIN_INPUT_PULLUP | MUX_MODE3)
 384                                 AM4372_IOPAD(0x898, PIN_INPUT_PULLUP | MUX_MODE3)
 385                                 AM4372_IOPAD(0x89c, PIN_INPUT_PULLUP | MUX_MODE3)
 386                         >;
 387                 };
 388
 389                 qspi1_pins_sleep: qspi1_pins_sleep {
 390                         pinctrl-single,pins = <
 391                                 AM4372_IOPAD(0x87c, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
 392                                 AM4372_IOPAD(0x888, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
 393                                 AM4372_IOPAD(0x890, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
 394                                 AM4372_IOPAD(0x894, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
 395                                 AM4372_IOPAD(0x898, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
 396                                 AM4372_IOPAD(0x89c, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
 397                         >;
 398                 };
 399
 400                 pixcir_ts_pins_default: pixcir_ts_pins_default {
 401                         pinctrl-single,pins = <
 402                                 AM4372_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE7)       /* gpmc_a1.gpio1_17 */
 403                         >;
 404                 };
 405
 406                 pixcir_ts_pins_sleep: pixcir_ts_pins_sleep {
 407                         pinctrl-single,pins = <
 408                                 AM4372_IOPAD(0x844, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7)      /* gpmc_a1.gpio1_17 */
 409                         >;
 410                 };
 411
 412                 hdq_pins: pinmux_hdq_pins {
 413                         pinctrl-single,pins = <
 414                                 AM4372_IOPAD(0xa34, PIN_INPUT_PULLUP | MUX_MODE1)    /* cam1_wen.hdq_gpio */
 415                         >;
 416                 };
 417
 418                 dss_pins: dss_pins {
 419                         pinctrl-single,pins = <
 420                                 AM4372_IOPAD(0x820, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
 421                                 AM4372_IOPAD(0x824, PIN_OUTPUT_PULLUP | MUX_MODE1)
 422                                 AM4372_IOPAD(0x828, PIN_OUTPUT_PULLUP | MUX_MODE1)
 423                                 AM4372_IOPAD(0x82c, PIN_OUTPUT_PULLUP | MUX_MODE1)
 424                                 AM4372_IOPAD(0x830, PIN_OUTPUT_PULLUP | MUX_MODE1)
 425                                 AM4372_IOPAD(0x834, PIN_OUTPUT_PULLUP | MUX_MODE1)
 426                                 AM4372_IOPAD(0x838, PIN_OUTPUT_PULLUP | MUX_MODE1)
 427                                 AM4372_IOPAD(0x83c, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
 428                                 AM4372_IOPAD(0x8a0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
 429                                 AM4372_IOPAD(0x8a4, PIN_OUTPUT_PULLUP | MUX_MODE0)
 430                                 AM4372_IOPAD(0x8a8, PIN_OUTPUT_PULLUP | MUX_MODE0)
 431                                 AM4372_IOPAD(0x8ac, PIN_OUTPUT_PULLUP | MUX_MODE0)
 432                                 AM4372_IOPAD(0x8b0, PIN_OUTPUT_PULLUP | MUX_MODE0)
 433                                 AM4372_IOPAD(0x8b4, PIN_OUTPUT_PULLUP | MUX_MODE0)
 434                                 AM4372_IOPAD(0x8B8, PIN_OUTPUT_PULLUP | MUX_MODE0)
 435                                 AM4372_IOPAD(0x8bc, PIN_OUTPUT_PULLUP | MUX_MODE0)
 436                                 AM4372_IOPAD(0x8c0, PIN_OUTPUT_PULLUP | MUX_MODE0)
 437                                 AM4372_IOPAD(0x8c4, PIN_OUTPUT_PULLUP | MUX_MODE0)
 438                                 AM4372_IOPAD(0x8c8, PIN_OUTPUT_PULLUP | MUX_MODE0)
 439                                 AM4372_IOPAD(0x8cc, PIN_OUTPUT_PULLUP | MUX_MODE0)
 440                                 AM4372_IOPAD(0x8d0, PIN_OUTPUT_PULLUP | MUX_MODE0)
 441                                 AM4372_IOPAD(0x8d4, PIN_OUTPUT_PULLUP | MUX_MODE0)
 442                                 AM4372_IOPAD(0x8d8, PIN_OUTPUT_PULLUP | MUX_MODE0)
 443                                 AM4372_IOPAD(0x8dc, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
 444                                 AM4372_IOPAD(0x8e0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
 445                                 AM4372_IOPAD(0x8e4, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
 446                                 AM4372_IOPAD(0x8e8, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
 447                                 AM4372_IOPAD(0x8ec, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
 448                         >;
 449                 };
 450
 451                 display_mux_pins: display_mux_pins {
 452                         pinctrl-single,pins = <
 453                                 /* GPMC CLK -> GPIO 2_1 to select LCD / HDMI */
 454                                 AM4372_IOPAD(0x88C, PIN_OUTPUT_PULLUP | MUX_MODE7)
 455                         >;
 456                 };
 457
 458                 vpfe1_pins_default: vpfe1_pins_default {
 459                         pinctrl-single,pins = <
 460                                 AM4372_IOPAD(0x9cc, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data9 mode 0 */
 461                                 AM4372_IOPAD(0x9d0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data8 mode 0 */
 462                                 AM4372_IOPAD(0x9d4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_hd mode 0 */
 463                                 AM4372_IOPAD(0x9d8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_vd mode 0 */
 464                                 AM4372_IOPAD(0x9dc, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_pclk mode 0 */
 465                                 AM4372_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data0 mode 0 */
 466                                 AM4372_IOPAD(0x9ec, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data1 mode 0 */
 467                                 AM4372_IOPAD(0x9f0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data2 mode 0 */
 468                                 AM4372_IOPAD(0x9f4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data3 mode 0 */
 469                                 AM4372_IOPAD(0x9f8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data4 mode 0 */
 470                                 AM4372_IOPAD(0x9fc, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data5 mode 0 */
 471                                 AM4372_IOPAD(0xa00, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data6 mode 0 */
 472                                 AM4372_IOPAD(0xa04, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data7 mode 0 */
 473                         >;
 474                 };
 475
 476                 vpfe1_pins_sleep: vpfe1_pins_sleep {
 477                         pinctrl-single,pins = <
 478                                 AM4372_IOPAD(0x9cc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 479                                 AM4372_IOPAD(0x9d0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 480                                 AM4372_IOPAD(0x9d4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 481                                 AM4372_IOPAD(0x9d8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 482                                 AM4372_IOPAD(0x9dc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 483                                 AM4372_IOPAD(0x9e8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 484                                 AM4372_IOPAD(0x9ec, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 485                                 AM4372_IOPAD(0x9f0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 486                                 AM4372_IOPAD(0x9f4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 487                                 AM4372_IOPAD(0x9f8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 488                                 AM4372_IOPAD(0x9fc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 489                                 AM4372_IOPAD(0xa00, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 490                                 AM4372_IOPAD(0xa04, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 491                         >;
 492                 };
 493
 494                 uart0_pins_default: uart0_pins_default {
 495                         pinctrl-single,pins = <
 496                                 AM4372_IOPAD(0x968, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0) /* uart0_ctsn.uart0_ctsn */
 497                                 AM4372_IOPAD(0x96C, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0) /* uart0_rtsn.uart0_rtsn */
 498                                 AM4372_IOPAD(0x970, PIN_INPUT_PULLUP | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_rxd.uart0_rxd */
 499                                 AM4372_IOPAD(0x974, PIN_INPUT | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0)        /* uart0_txd.uart0_txd */
 500                         >;
 501                 };
 502
 503                 uart0_pins_sleep: uart0_pins_sleep {
 504                         pinctrl-single,pins = <
 505                                 AM4372_IOPAD(0x968, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 506                                 AM4372_IOPAD(0x96C, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 507                                 AM4372_IOPAD(0x970, PIN_INPUT_PULLUP | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0)
 508                                 AM4372_IOPAD(0x974, PIN_INPUT | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0)
 509                         >;
 510                 };
 511
 512                 usb2_phy1_default: usb2_phy1_default {
 513                         pinctrl-single,pins = <
 514                                 AM4372_IOPAD(0xac0, PIN_INPUT_PULLDOWN | MUX_MODE0)
 515                         >;
 516                 };
 517
 518                 usb2_phy1_sleep: usb2_phy1_sleep {
 519                         pinctrl-single,pins = <
 520                                 AM4372_IOPAD(0xac0, DS0_PULL_UP_DOWN_EN | PIN_INPUT_PULLDOWN | MUX_MODE7)
 521                         >;
 522                 };
 523
 524                 usb2_phy2_default: usb2_phy2_default {
 525                         pinctrl-single,pins = <
 526                                 AM4372_IOPAD(0xac4, PIN_INPUT_PULLDOWN | MUX_MODE0)
 527                         >;
 528                 };
 529
 530                 usb2_phy2_sleep: usb2_phy2_sleep {
 531                         pinctrl-single,pins = <
 532                                 AM4372_IOPAD(0xac4, DS0_PULL_UP_DOWN_EN | PIN_INPUT_PULLDOWN | MUX_MODE7)
 533                         >;
 534                 };
 535
 536                 mcasp1_pins: mcasp1_pins {
 537                         pinctrl-single,pins = <
 538                                 AM4372_IOPAD(0x9a0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_ACLKR/MCASP1_ACLKX */
 539                                 AM4372_IOPAD(0x9a4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_FSR/MCASP1_FSX */
 540                                 AM4372_IOPAD(0x9a8, PIN_OUTPUT_PULLDOWN | MUX_MODE3)/* MCASP0_AXR1/MCASP1_AXR0 */
 541                                 AM4372_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_AHCLKX/MCASP1_AXR1 */
 542                         >;
 543                 };
 544
 545                 mcasp1_sleep_pins: mcasp1_sleep_pins {
 546                         pinctrl-single,pins = <
 547                                 AM4372_IOPAD(0x9a0, PIN_INPUT_PULLDOWN | MUX_MODE7)
 548                                 AM4372_IOPAD(0x9a4, PIN_INPUT_PULLDOWN | MUX_MODE7)
 549                                 AM4372_IOPAD(0x9a8, PIN_INPUT_PULLDOWN | MUX_MODE7)
 550                                 AM4372_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE7)
 551                         >;
 552                 };
 553 };
 554
 555 &mmc1 {
 556         status = "okay";
 557         vmmc-supply = <&vmmcsd_fixed>;
 558         bus-width = <4>;
 559         pinctrl-names = "default", "sleep";
 560         pinctrl-0 = <&mmc1_pins_default>;
 561         pinctrl-1 = <&mmc1_pins_sleep>;
 562         cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 563 };
 564
 565 &mac {
 566         pinctrl-names = "default", "sleep";
 567         pinctrl-0 = <&cpsw_default>;
 568         pinctrl-1 = <&cpsw_sleep>;
 569         status = "okay";
 570         slaves = <1>;
 571 };
 572
 573 &davinci_mdio {
 574         pinctrl-names = "default", "sleep";
 575         pinctrl-0 = <&davinci_mdio_default>;
 576         pinctrl-1 = <&davinci_mdio_sleep>;
 577         status = "okay";
 578 };
 579
 580 &cpsw_emac0 {
 581         phy_id = <&davinci_mdio>, <16>;
 582         phy-mode = "rmii";
 583 };
 584
 585 &phy_sel {
 586         rmii-clock-ext;
 587 };
 588
 589 &i2c0 {
 590         status = "okay";
 591         pinctrl-names = "default";
 592         pinctrl-0 = <&i2c0_pins>;
 593         clock-frequency = <100000>;
 594
 595         tps65218: tps65218@24 {
 596                 reg = <0x24>;
 597                 compatible = "ti,tps65218";
 598                 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* NMIn */
 599                 interrupt-controller;
 600                 #interrupt-cells = <2>;
 601
 602                 dcdc1: regulator-dcdc1 {
 603                         regulator-name = "vdd_core";
 604                         regulator-min-microvolt = <912000>;
 605                         regulator-max-microvolt = <1144000>;
 606                         regulator-boot-on;
 607                         regulator-always-on;
 608                 };
 609
 610                 dcdc2: regulator-dcdc2 {
 611                         regulator-name = "vdd_mpu";
 612                         regulator-min-microvolt = <912000>;
 613                         regulator-max-microvolt = <1378000>;
 614                         regulator-boot-on;
 615                         regulator-always-on;
 616                 };
 617
 618                 dcdc3: regulator-dcdc3 {
 619                         regulator-name = "vdcdc3";
 620                         regulator-boot-on;
 621                         regulator-always-on;
 622                 };
 623
 624                 dcdc4: regulator-dcdc4 {
 625                         regulator-name = "vdcdc4";
 626                         regulator-min-microvolt = <3300000>;
 627                         regulator-max-microvolt = <3300000>;
 628                         regulator-boot-on;
 629                         regulator-always-on;
 630                 };
 631
 632                 dcdc5: regulator-dcdc5 {
 633                         regulator-name = "v1_0bat";
 634                         regulator-min-microvolt = <1000000>;
 635                         regulator-max-microvolt = <1000000>;
 636                 };
 637
 638                 dcdc6: regulator-dcdc6 {
 639                         regulator-name = "v1_8bat";
 640                         regulator-min-microvolt = <1800000>;
 641                         regulator-max-microvolt = <1800000>;
 642                 };
 643
 644                 ldo1: regulator-ldo1 {
 645                         regulator-min-microvolt = <1800000>;
 646                         regulator-max-microvolt = <1800000>;
 647                         regulator-boot-on;
 648                         regulator-always-on;
 649                 };
 650         };
 651
 652         at24@50 {
 653                 compatible = "atmel,24c256";
 654                 pagesize = <64>;
 655                 reg = <0x50>;
 656         };
 657
 658         pixcir_ts@5c {
 659                 compatible = "pixcir,pixcir_tangoc";
 660                 pinctrl-names = "default", "sleep";
 661                 pinctrl-0 = <&pixcir_ts_pins_default>;
 662                 pinctrl-1 = <&pixcir_ts_pins_sleep>;
 663
 664                 reg = <0x5c>;
 665                 interrupt-parent = <&gpio1>;
 666                 interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
 667
 668                 attb-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>;
 669
 670                 touchscreen-size-x = <1024>;
 671                 touchscreen-size-y = <600>;
 672         };
 673
 674         tlv320aic3111: tlv320aic3111@18 {
 675                 #sound-dai-cells = <0>;
 676                 compatible = "ti,tlv320aic3111";
 677                 reg = <0x18>;
 678                 status = "okay";
 679
 680                 ai31xx-micbias-vg = <MICBIAS_2_0V>;
 681
 682                 /* Regulators */
 683                 HPVDD-supply = <&dcdc4>; /* v3_3AUD -> V3_3D -> DCDC4 */
 684                 SPRVDD-supply = <&vbat>; /* vbat */
 685                 SPLVDD-supply = <&vbat>; /* vbat */
 686                 AVDD-supply = <&dcdc4>; /* v3_3AUD -> V3_3D -> DCDC4 */
 687                 IOVDD-supply = <&dcdc4>; /* V3_3D -> DCDC4 */
 688                 DVDD-supply = <&ldo1>; /* V1_8AUD -> V1_8D -> LDO1 */
 689         };
 690 };
 691
 692 &i2c2 {
 693         pinctrl-names = "default";
 694         pinctrl-0 = <&i2c2_pins>;
 695         status = "okay";
 696 };
 697
 698 &gpio0 {
 699         status = "okay";
 700 };
 701
 702 &gpio1 {
 703         status = "okay";
 704 };
 705
 706 &gpio2 {
 707         pinctrl-names = "default";
 708         pinctrl-0 = <&display_mux_pins>;
 709         status = "okay";
 710
 711         p1 {
 712                 /*
 713                  * SelLCDorHDMI selects between display and audio paths:
 714                  * Low: HDMI display with audio via HDMI
 715                  * High: LCD display with analog audio via aic3111 codec
 716                  */
 717                 gpio-hog;
 718                 gpios = <1 GPIO_ACTIVE_HIGH>;
 719                 output-high;
 720                 line-name = "SelLCDorHDMI";
 721         };
 722 };
 723
 724 &gpio3 {
 725         status = "okay";
 726 };
 727
 728 &elm {
 729         status = "okay";
 730 };
 731
 732 &gpmc {
 733         status = "okay";        /* Disable QSPI when enabling GPMC (NAND) */
 734         pinctrl-names = "default", "sleep";
 735         pinctrl-0 = <&nand_flash_x8_default>;
 736         pinctrl-1 = <&nand_flash_x8_sleep>;
 737         ranges = <0 0 0x08000000 0x01000000>;   /* CS0 space. Min partition = 16MB */
 738         nand@0,0 {
 739                 compatible = "ti,omap2-nand";
 740                 reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
 741                 interrupt-parent = <&gpmc>;
 742                 interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 743                              <1 IRQ_TYPE_NONE>; /* termcount */
 744                 rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>;  /* gpmc_wait0 */
 745                 ti,nand-xfer-type = "prefetch-dma";
 746                 ti,nand-ecc-opt = "bch16";
 747                 ti,elm-id = <&elm>;
 748                 nand-bus-width = <8>;
 749                 gpmc,device-width = <1>;
 750                 gpmc,sync-clk-ps = <0>;
 751                 gpmc,cs-on-ns = <0>;
 752                 gpmc,cs-rd-off-ns = <40>; /* tCEA + tCHZ + 1 */
 753                 gpmc,cs-wr-off-ns = <40>;
 754                 gpmc,adv-on-ns = <0>;  /* cs-on-ns */
 755                 gpmc,adv-rd-off-ns = <25>; /* min( tALH + tALS + 1) */
 756                 gpmc,adv-wr-off-ns = <25>; /* min( tALH + tALS + 1) */
 757                 gpmc,we-on-ns = <0>;   /* cs-on-ns */
 758                 gpmc,we-off-ns = <20>; /* we-on-time + tWP + 2 */
 759                 gpmc,oe-on-ns = <3>;  /* cs-on-ns + tRR + 2 */
 760                 gpmc,oe-off-ns = <30>; /* oe-on-ns + tRP + 2 */
 761                 gpmc,access-ns = <30>; /* tCEA + 4*/
 762                 gpmc,rd-cycle-ns = <40>;
 763                 gpmc,wr-cycle-ns = <40>;
 764                 gpmc,bus-turnaround-ns = <0>;
 765                 gpmc,cycle2cycle-delay-ns = <0>;
 766                 gpmc,clk-activation-ns = <0>;
 767                 gpmc,wr-access-ns = <40>;
 768                 gpmc,wr-data-mux-bus-ns = <0>;
 769                 /* MTD partition table */
 770                 /* All SPL-* partitions are sized to minimal length
 771                  * which can be independently programmable. For
 772                  * NAND flash this is equal to size of erase-block */
 773                 #address-cells = <1>;
 774                 #size-cells = <1>;
 775                 partition@0 {
 776                         label = "NAND.SPL";
 777                         reg = <0x00000000 0x00040000>;
 778                 };
 779                 partition@1 {
 780                         label = "NAND.SPL.backup1";
 781                         reg = <0x00040000 0x00040000>;
 782                 };
 783                 partition@2 {
 784                         label = "NAND.SPL.backup2";
 785                         reg = <0x00080000 0x00040000>;
 786                 };
 787                 partition@3 {
 788                         label = "NAND.SPL.backup3";
 789                         reg = <0x000C0000 0x00040000>;
 790                 };
 791                 partition@4 {
 792                         label = "NAND.u-boot-spl-os";
 793                         reg = <0x00100000 0x00080000>;
 794                 };
 795                 partition@5 {
 796                         label = "NAND.u-boot";
 797                         reg = <0x00180000 0x00100000>;
 798                 };
 799                 partition@6 {
 800                         label = "NAND.u-boot-env";
 801                         reg = <0x00280000 0x00040000>;
 802                 };
 803                 partition@7 {
 804                         label = "NAND.u-boot-env.backup1";
 805                         reg = <0x002C0000 0x00040000>;
 806                 };
 807                 partition@8 {
 808                         label = "NAND.kernel";
 809                         reg = <0x00300000 0x00700000>;
 810                 };
 811                 partition@9 {
 812                         label = "NAND.file-system";
 813                         reg = <0x00a00000 0x1f600000>;
 814                 };
 815         };
 816 };
 817
 818 &epwmss0 {
 819         status = "okay";
 820 };
 821
 822 &tscadc {
 823         status = "okay";
 824
 825         adc {
 826                 ti,adc-channels = <0 1 2 3 4 5 6 7>;
 827         };
 828 };
 829
 830 &ecap0 {
 831                 status = "okay";
 832                 pinctrl-names = "default", "sleep";
 833                 pinctrl-0 = <&ecap0_pins_default>;
 834                 pinctrl-1 = <&ecap0_pins_sleep>;
 835 };
 836
 837 &spi0 {
 838         status = "okay";
 839         pinctrl-names = "default", "sleep";
 840         pinctrl-0 = <&spi0_pins_default>;
 841         pinctrl-1 = <&spi0_pins_sleep>;
 842         ti,pindir-d0-out-d1-in;
 843 };
 844
 845 &spi1 {
 846         status = "okay";
 847         pinctrl-names = "default", "sleep";
 848         pinctrl-0 = <&spi1_pins_default>;
 849         pinctrl-1 = <&spi1_pins_sleep>;
 850         ti,pindir-d0-out-d1-in;
 851 };
 852
 853 &usb2_phy1 {
 854         status = "okay";
 855         pinctrl-names = "default", "sleep";
 856         pinctrl-0 = <&usb2_phy1_default>;
 857         pinctrl-1 = <&usb2_phy1_sleep>;
 858 };
 859
 860 &usb1 {
 861         dr_mode = "otg";
 862         status = "okay";
 863 };
 864
 865 &usb2_phy2 {
 866         status = "okay";
 867         pinctrl-names = "default", "sleep";
 868         pinctrl-0 = <&usb2_phy2_default>;
 869         pinctrl-1 = <&usb2_phy2_sleep>;
 870 };
 871
 872 &usb2 {
 873         dr_mode = "host";
 874         status = "okay";
 875 };
 876
 877 &qspi {
 878         status = "disabled";    /* Disable GPMC (NAND) when enabling QSPI */
 879         pinctrl-names = "default", "sleep";
 880         pinctrl-0 = <&qspi1_pins_default>;
 881         pinctrl-1 = <&qspi1_pins_sleep>;
 882
 883         spi-max-frequency = <48000000>;
 884         m25p80@0 {
 885                 compatible = "mx66l51235l";
 886                 spi-max-frequency = <48000000>;
 887                 reg = <0>;
 888                 spi-cpol;
 889                 spi-cpha;
 890                 spi-tx-bus-width = <1>;
 891                 spi-rx-bus-width = <4>;
 892                 #address-cells = <1>;
 893                 #size-cells = <1>;
 894
 895                 /* MTD partition table.
 896                  * The ROM checks the first 512KiB
 897                  * for a valid file to boot(XIP).
 898                  */
 899                 partition@0 {
 900                         label = "QSPI.U_BOOT";
 901                         reg = <0x00000000 0x000080000>;
 902                 };
 903                 partition@1 {
 904                         label = "QSPI.U_BOOT.backup";
 905                         reg = <0x00080000 0x00080000>;
 906                 };
 907                 partition@2 {
 908                         label = "QSPI.U-BOOT-SPL_OS";
 909                         reg = <0x00100000 0x00010000>;
 910                 };
 911                 partition@3 {
 912                         label = "QSPI.U_BOOT_ENV";
 913                         reg = <0x00110000 0x00010000>;
 914                 };
 915                 partition@4 {
 916                         label = "QSPI.U-BOOT-ENV.backup";
 917                         reg = <0x00120000 0x00010000>;
 918                 };
 919                 partition@5 {
 920                         label = "QSPI.KERNEL";
 921                         reg = <0x00130000 0x0800000>;
 922                 };
 923                 partition@6 {
 924                         label = "QSPI.FILESYSTEM";
 925                         reg = <0x00930000 0x36D0000>;
 926                 };
 927         };
 928 };
 929
 930 &hdq {
 931         status = "okay";
 932         pinctrl-names = "default";
 933         pinctrl-0 = <&hdq_pins>;
 934 };
 935
 936 &dss {
 937         status = "ok";
 938
 939         pinctrl-names = "default";
 940         pinctrl-0 = <&dss_pins>;
 941
 942         port {
 943                 dpi_out: endpoint {
 944                         remote-endpoint = <&lcd_in>;
 945                         data-lines = <24>;
 946                 };
 947         };
 948 };
 949
 950 &vpfe1 {
 951         status = "okay";
 952         pinctrl-names = "default", "sleep";
 953         pinctrl-0 = <&vpfe1_pins_default>;
 954         pinctrl-1 = <&vpfe1_pins_sleep>;
 955
 956         port {
 957                 vpfe1_ep: endpoint {
 958                         /* remote-endpoint = <&sensor>; add once we have it */
 959                         ti,am437x-vpfe-interface = <0>;
 960                         bus-width = <8>;
 961                         hsync-active = <0>;
 962                         vsync-active = <0>;
 963                 };
 964         };
 965 };
 966
 967 &uart0 {
 968         status = "okay";
 969         pinctrl-names = "default", "sleep";
 970         pinctrl-0 = <&uart0_pins_default>;
 971         pinctrl-1 = <&uart0_pins_sleep>;
 972 };
 973
 974 &mcasp1 {
 975         #sound-dai-cells = <0>;
 976         pinctrl-names = "default", "sleep";
 977         pinctrl-0 = <&mcasp1_pins>;
 978         pinctrl-1 = <&mcasp1_sleep_pins>;
 979
 980         status = "okay";
 981
 982         op-mode = <0>;          /* MCASP_IIS_MODE */
 983         tdm-slots = <2>;
 984         /* 4 serializer */
 985         serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
 986                 1 2 0 0
 987         >;
 988         tx-num-evt = <32>;
 989         rx-num-evt = <32>;
 990 };
 991
 992 &mux_synctimer32k_ck {
 993         assigned-clocks = <&mux_synctimer32k_ck>;
 994         assigned-clock-parents = <&clkdiv32k_ick>;
 995 };
 996
 997 &cpu {
 998         cpu0-supply = <&dcdc2>;
 999 };