3 This device supports I2C only.
7 - compatible : "wlf,wm8962"
9 - reg : the I2C address of the device.
13 - clocks : The clock source of the mclk
15 - spk-mono: This is a boolean property. If present, the SPK_MONO bit
16 of R51 (Class D Control 2) gets set, indicating that the speaker is
19 - mic-cfg : Default register value for R48 (Additional Control 4).
20 If absent, the default should be the register default.
22 - gpio-cfg : A list of GPIO configuration register values. The list must
23 be 6 entries long. If absent, no configuration of these registers is
24 performed. And note that only the value within [0x0, 0xffff] is valid.
25 Any other value is regarded as setting the GPIO register by its reset
31 compatible = "wlf,wm8962";
33 clocks = <&clks IMX6QDL_CLK_CKO>;
36 0x0000 /* 0:Default */
37 0x0000 /* 1:Default */
38 0x0013 /* 2:FN_DMICCLK */
39 0x0000 /* 3:Default */
40 0x8014 /* 4:FN_DMICCDAT */
41 0x0000 /* 5:Default */