Linux 6.7-rc7
[linux-modified.git] / Documentation / devicetree / bindings / sound / nuvoton,nau8824.yaml
1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
2 %YAML 1.2
3 ---
4 $id: http://devicetree.org/schemas/sound/nuvoton,nau8824.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
6
7 title: NAU8824 audio CODEC
8
9 maintainers:
10   - John Hsu <KCHSU0@nuvoton.com>
11
12 allOf:
13   - $ref: dai-common.yaml#
14
15 properties:
16   compatible:
17     enum:
18       - nuvoton,nau8824
19
20   reg:
21     maxItems: 1
22
23   '#sound-dai-cells':
24     const: 0
25
26   interrupts:
27     maxItems: 1
28
29   nuvoton,jkdet-polarity:
30     $ref: /schemas/types.yaml#/definitions/uint32
31     description:
32       JKDET pin polarity.
33     enum:
34       - 0 # active high
35       - 1 # active low
36     default: 1
37
38   nuvoton,vref-impedance:
39     $ref: /schemas/types.yaml#/definitions/uint32
40     description:
41       VREF Impedance selection.
42     enum:
43       - 0 # Open
44       - 1 # 25 kOhm
45       - 2 # 125 kOhm
46       - 3 # 2.5 kOhm
47     default: 2
48
49   nuvoton,micbias-voltage:
50     $ref: /schemas/types.yaml#/definitions/uint32
51     description:
52       Micbias voltage level.
53     enum:
54       - 0 # VDDA
55       - 1 # VDDA
56       - 2 # VDDA * 1.1
57       - 3 # VDDA * 1.2
58       - 4 # VDDA * 1.3
59       - 5 # VDDA * 1.4
60       - 6 # VDDA * 1.53
61       - 7 # VDDA * 1.53
62     default: 6
63
64   nuvoton,sar-threshold-num:
65     $ref: /schemas/types.yaml#/definitions/uint32
66     description:
67       Number of buttons supported.
68     minimum: 1
69     maximum: 8
70     default: 4
71
72   nuvoton,sar-threshold:
73     $ref: /schemas/types.yaml#/definitions/uint32-array
74     description:
75       Impedance threshold for each button. Array that contains up to 8 buttons
76       configuration. SAR value is calculated as
77       SAR = 255 * MICBIAS / SAR_VOLTAGE * R / (2000 + R) where MICBIAS is
78       configured by 'nuvoton,micbias-voltage', SAR_VOLTAGE is configured by
79       'nuvoton,sar-voltage', R - button impedance.
80       Refer datasheet section 10.2 for more information about threshold
81       calculation.
82     minItems: 1
83     maxItems: 8
84     items:
85       minimum: 0
86       maximum: 255
87
88   nuvoton,sar-hysteresis:
89     $ref: /schemas/types.yaml#/definitions/uint32
90     description:
91       Button impedance measurement hysteresis.
92     default: 0
93
94   nuvoton,sar-voltage:
95     $ref: /schemas/types.yaml#/definitions/uint32
96     description:
97       Reference voltage for button impedance measurement.
98     enum:
99       - 0 # VDDA
100       - 1 # VDDA
101       - 2 # VDDA * 1.1
102       - 3 # VDDA * 1.2
103       - 4 # VDDA * 1.3
104       - 5 # VDDA * 1.4
105       - 6 # VDDA * 1.53
106       - 7 # VDDA * 1.53
107     default: 6
108
109   nuvoton,sar-compare-time:
110     $ref: /schemas/types.yaml#/definitions/uint32
111     description:
112       SAR compare time.
113     enum:
114       - 0 # 500ns
115       - 1 # 1us
116       - 2 # 2us
117       - 3 # 4us
118     default: 1
119
120   nuvoton,sar-sampling-time:
121     $ref: /schemas/types.yaml#/definitions/uint32
122     description:
123       SAR sampling time.
124     enum:
125       - 0 # 2us
126       - 1 # 4us
127       - 2 # 8us
128       - 3 # 16us
129     default: 1
130
131   nuvoton,short-key-debounce:
132     $ref: /schemas/types.yaml#/definitions/uint32
133     description:
134       Button short key press debounce time.
135     enum:
136       - 0 # 30 ms
137       - 1 # 50 ms
138       - 2 # 100 ms
139     default: 0
140
141   nuvoton,jack-eject-debounce:
142     $ref: /schemas/types.yaml#/definitions/uint32
143     description:
144       Jack ejection debounce time.
145     enum:
146       - 0 # 0 ms
147       - 1 # 1 ms
148       - 2 # 10 ms
149     default: 1
150
151 required:
152   - compatible
153   - reg
154
155 unevaluatedProperties: false
156
157 examples:
158   - |
159     #include <dt-bindings/gpio/gpio.h>
160     #include <dt-bindings/interrupt-controller/irq.h>
161     i2c {
162         #address-cells = <1>;
163         #size-cells = <0>;
164         codec@1a {
165             #sound-dai-cells = <0>;
166             compatible = "nuvoton,nau8824";
167             reg = <0x1a>;
168             interrupt-parent = <&gpio>;
169             interrupts = <38 IRQ_TYPE_LEVEL_LOW>;
170             nuvoton,vref-impedance = <2>;
171             nuvoton,micbias-voltage = <6>;
172             nuvoton,sar-threshold-num = <4>;
173             // Setup 4 buttons impedance according to Android specification
174             nuvoton,sar-threshold = <0xc 0x1e 0x38 0x60>;
175             nuvoton,sar-hysteresis = <0>;
176             nuvoton,sar-voltage = <6>;
177             nuvoton,sar-compare-time = <1>;
178             nuvoton,sar-sampling-time = <1>;
179             nuvoton,short-key-debounce = <0>;
180             nuvoton,jack-eject-debounce = <1>;
181         };
182     };