1 * NXP SC16IS7xx advanced Universal Asynchronous Receiver-Transmitter (UART)
5 - compatible: Should be one of the following:
6 - "nxp,sc16is740" for NXP SC16IS740,
7 - "nxp,sc16is741" for NXP SC16IS741,
8 - "nxp,sc16is750" for NXP SC16IS750,
9 - "nxp,sc16is752" for NXP SC16IS752,
10 - "nxp,sc16is760" for NXP SC16IS760,
11 - "nxp,sc16is762" for NXP SC16IS762.
12 - reg: I2C address of the SC16IS7xx device.
13 - interrupts: Should contain the UART interrupt
14 - clocks: Reference to the IC source clock.
15 OR (when there is no clock provider visible to the platform)
16 - clock-frequency: The source clock frequency for the IC.
19 - gpio-controller: Marks the device node as a GPIO controller.
20 - #gpio-cells: Should be two. The first cell is the GPIO number and
21 the second cell is used to specify the GPIO polarity:
24 - irda-mode-ports: An array that lists the indices of the port that
25 should operate in IrDA mode.
28 sc16is750: sc16is750@51 {
29 compatible = "nxp,sc16is750";
32 interrupt-parent = <&gpio3>;
33 interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
41 - compatible: Should be one of the following:
42 - "nxp,sc16is740" for NXP SC16IS740,
43 - "nxp,sc16is741" for NXP SC16IS741,
44 - "nxp,sc16is750" for NXP SC16IS750,
45 - "nxp,sc16is752" for NXP SC16IS752,
46 - "nxp,sc16is760" for NXP SC16IS760,
47 - "nxp,sc16is762" for NXP SC16IS762.
48 - reg: SPI chip select number.
49 - interrupts: Specifies the interrupt source of the parent interrupt
50 controller. The format of the interrupt specifier depends on the
51 parent interrupt controller.
52 - clocks: phandle to the IC source clock.
55 - gpio-controller: Marks the device node as a GPIO controller.
56 - #gpio-cells: Should be two. The first cell is the GPIO number and
57 the second cell is used to specify the GPIO polarity:
60 - irda-mode-ports: An array that lists the indices of the port that
61 should operate in IrDA mode.
64 sc16is750: sc16is750@0 {
65 compatible = "nxp,sc16is750";
68 interrupt-parent = <&gpio3>;
69 interrupts = <7 IRQ_TYPE_EDGE_FALLING>;