Documentation/devicetree/bindings/regulator/maxim,max77802.yaml

   1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
   2 %YAML 1.2
   3 ---
   4 $id: http://devicetree.org/schemas/regulator/maxim,max77802.yaml#
   5 $schema: http://devicetree.org/meta-schemas/core.yaml#
   6
   7 title: Maxim MAX77802 Power Management IC regulators
   8
   9 maintainers:
  10   - Javier Martinez Canillas <javier@dowhile0.org>
  11   - Krzysztof Kozlowski <krzk@kernel.org>
  12
  13 description: |
  14   This is a part of device tree bindings for Maxim MAX77802 Power Management
  15   Integrated Circuit (PMIC).
  16
  17   The Maxim MAX77686 provides 10 high-efficiency Buck and 32 Low-DropOut (LDO)
  18   regulators.
  19
  20   See also Documentation/devicetree/bindings/mfd/maxim,max77802.yaml for
  21   additional information and example.
  22
  23   Certain regulators support "regulator-initial-mode" and "regulator-mode".
  24   The valid modes list is defined in the dt-bindings/regulator/maxim,max77802.h
  25   and their meaning is::
  26     1 - Normal regulator voltage output mode.
  27     3 - Low Power which reduces the quiescent current down to only 1uA
  28
  29   The standard "regulator-mode" property can only be used for regulators that
  30   support changing their mode to Low Power Mode during suspend. These
  31   regulators are:: bucks 2-4 and LDOs 1-35. Also, it only takes effect if the
  32   regulator has been enabled for the given suspend state using
  33   "regulator-on-in-suspend" and has not been disabled for that state using
  34   "regulator-off-in-suspend".
  35
  36 patternProperties:
  37   # LDO1, LDO3, LDO20, LDO21
  38   "^LDO([13]|2[01])$":
  39     type: object
  40     $ref: regulator.yaml#
  41     unevaluatedProperties: false
  42     description:
  43       LDOs supporting the regulator-initial-mode property and changing their
  44       mode during normal operation.
  45
  46   # LDO2, LDO4-15, LDO17-19, LDO23-30, LDO32-35
  47   "^LDO([24-9]|1[0-5789]|2[3-9]|3[02345])$":
  48     type: object
  49     $ref: regulator.yaml#
  50     unevaluatedProperties: false
  51     description:
  52       LDOs supporting the regulator-mode property (changing mode to Low Power
  53       Mode during suspend).
  54
  55     properties:
  56       regulator-initial-mode: false
  57
  58   # buck2-4
  59   "^BUCK[2-4]$":
  60     type: object
  61     $ref: regulator.yaml#
  62     unevaluatedProperties: false
  63     description:
  64       bucks supporting the regulator-mode property (changing mode to Low Power
  65       Mode during suspend).
  66
  67     properties:
  68       regulator-initial-mode: false
  69
  70   # buck1, buck5-10
  71   "^BUCK([15-9]|10)$":
  72     type: object
  73     $ref: regulator.yaml#
  74     unevaluatedProperties: false
  75
  76     properties:
  77       regulator-initial-mode: false
  78
  79     patternProperties:
  80       regulator-state-(standby|mem|disk):
  81         type: object
  82         additionalProperties: true
  83         properties:
  84           regulator-mode: false
  85
  86 additionalProperties: false