3 Samsung SoCs contain PWM timer blocks which can be used for system clock source
4 and clock event timers, as well as to drive SoC outputs with PWM signal. Each
5 PWM timer block provides 5 PWM channels (not all of them can drive physical
6 outputs - see SoC and board manual).
8 Be aware that the clocksource driver supports only uniprocessor systems.
11 - compatible : should be one of following:
12 samsung,s3c2410-pwm - for 16-bit timers present on S3C24xx SoCs
13 samsung,s3c6400-pwm - for 32-bit timers present on S3C64xx SoCs
14 samsung,s5p6440-pwm - for 32-bit timers present on S5P64x0 SoCs
15 samsung,s5pc100-pwm - for 32-bit timers present on S5PC100, S5PV210,
17 samsung,exynos4210-pwm - for 32-bit timers present on Exynos4210,
18 Exynos4x12, Exynos5250 and Exynos5420 SoCs
19 - reg: base address and size of register area
20 - interrupts: list of timer interrupts (one interrupt per timer, starting at
22 - clock-names: should contain all following required clock names:
23 - "timers" - PWM base clock used to generate PWM signals,
24 and any subset of following optional clock names:
25 - "pwm-tclk0" - first external PWM clock source,
26 - "pwm-tclk1" - second external PWM clock source.
27 Note that not all IP variants allow using all external clock sources.
28 Refer to SoC documentation to learn which clock source configurations
30 - clocks: should contain clock specifiers of all clocks, which input names
31 have been specified in clock-names property, in same order.
32 - #pwm-cells: should be 3. See pwm.txt in this directory for a description of
33 the cells format. The only third cell flag supported by this binding is
34 PWM_POLARITY_INVERTED.
37 - samsung,pwm-outputs: list of PWM channels used as PWM outputs on particular
38 platform - an array of up to 5 elements being indices of PWM channels
39 (from 0 to 4), the order does not matter.
43 compatible = "samsung,s3c6400-pwm";
44 reg = <0x7f006000 0x1000>;
45 interrupt-parent = <&vic0>;
46 interrupts = <23>, <24>, <25>, <27>, <28>;
48 clock-names = "timers";
49 samsung,pwm-outputs = <0>, <1>;