Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt

   1 Qualcomm MSM8996 TLMM block
   2
   3 This binding describes the Top Level Mode Multiplexer block found in the
   4 MSM8996 platform.
   5
   6 - compatible:
   7         Usage: required
   8         Value type: <string>
   9         Definition: must be "qcom,msm8996-pinctrl"
  10
  11 - reg:
  12         Usage: required
  13         Value type: <prop-encoded-array>
  14         Definition: the base address and size of the TLMM register space.
  15
  16 - interrupts:
  17         Usage: required
  18         Value type: <prop-encoded-array>
  19         Definition: should specify the TLMM summary IRQ.
  20
  21 - interrupt-controller:
  22         Usage: required
  23         Value type: <none>
  24         Definition: identifies this node as an interrupt controller
  25
  26 - #interrupt-cells:
  27         Usage: required
  28         Value type: <u32>
  29         Definition: must be 2. Specifying the pin number and flags, as defined
  30                     in <dt-bindings/interrupt-controller/irq.h>
  31
  32 - gpio-controller:
  33         Usage: required
  34         Value type: <none>
  35         Definition: identifies this node as a gpio controller
  36
  37 - #gpio-cells:
  38         Usage: required
  39         Value type: <u32>
  40         Definition: must be 2. Specifying the pin number and flags, as defined
  41                     in <dt-bindings/gpio/gpio.h>
  42
  43 Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
  44 a general description of GPIO and interrupt bindings.
  45
  46 Please refer to pinctrl-bindings.txt in this directory for details of the
  47 common pinctrl bindings used by client devices, including the meaning of the
  48 phrase "pin configuration node".
  49
  50 The pin configuration nodes act as a container for an arbitrary number of
  51 subnodes. Each of these subnodes represents some desired configuration for a
  52 pin, a group, or a list of pins or groups. This configuration can include the
  53 mux function to select on those pin(s)/group(s), and various pin configuration
  54 parameters, such as pull-up, drive strength, etc.
  55
  56
  57 PIN CONFIGURATION NODES:
  58
  59 The name of each subnode is not important; all subnodes should be enumerated
  60 and processed purely based on their content.
  61
  62 Each subnode only affects those parameters that are explicitly listed. In
  63 other words, a subnode that lists a mux function but no pin configuration
  64 parameters implies no information about any pin configuration parameters.
  65 Similarly, a pin subnode that describes a pullup parameter implies no
  66 information about e.g. the mux function.
  67
  68
  69 The following generic properties as defined in pinctrl-bindings.txt are valid
  70 to specify in a pin configuration subnode:
  71
  72 - pins:
  73         Usage: required
  74         Value type: <string-array>
  75         Definition: List of gpio pins affected by the properties specified in
  76                     this subnode.
  77
  78                     Valid pins are:
  79                       gpio0-gpio149
  80                         Supports mux, bias and drive-strength
  81
  82                       sdc1_clk, sdc1_cmd, sdc1_data sdc2_clk, sdc2_cmd,
  83                       sdc2_data sdc1_rclk
  84                         Supports bias and drive-strength
  85
  86 - function:
  87         Usage: required
  88         Value type: <string>
  89         Definition: Specify the alternative function to be configured for the
  90                     specified pins. Functions are only valid for gpio pins.
  91                     Valid values are:
  92
  93                     blsp_uart1, blsp_spi1, blsp_i2c1, blsp_uim1, atest_tsens,
  94                     bimc_dte1, dac_calib0, blsp_spi8, blsp_uart8, blsp_uim8,
  95                     qdss_cti_trig_out_b, bimc_dte0, dac_calib1, qdss_cti_trig_in_b,
  96                     dac_calib2, atest_tsens2, atest_usb1, blsp_spi10, blsp_uart10,
  97                     blsp_uim10, atest_bbrx1, atest_usb13, atest_bbrx0, atest_usb12,
  98                     mdp_vsync, edp_lcd, blsp_i2c10, atest_gpsadc1, atest_usb11,
  99                     atest_gpsadc0, edp_hot, atest_usb10, m_voc, dac_gpio, atest_char,
 100                     cam_mclk, pll_bypassnl, qdss_stm7, blsp_i2c8, qdss_tracedata_b,
 101                     pll_reset, qdss_stm6, qdss_stm5, qdss_stm4, atest_usb2, cci_i2c,
 102                     qdss_stm3, dac_calib3, atest_usb23, atest_char3, dac_calib4,
 103                     qdss_stm2, atest_usb22, atest_char2, qdss_stm1, dac_calib5,
 104                     atest_usb21, atest_char1, dbg_out, qdss_stm0, dac_calib6,
 105                     atest_usb20, atest_char0, dac_calib10, qdss_stm10,
 106                     qdss_cti_trig_in_a, cci_timer4, blsp_spi6, blsp_uart6, blsp_uim6,
 107                     blsp2_spi, qdss_stm9, qdss_cti_trig_out_a, dac_calib11,
 108                     qdss_stm8, cci_timer0, qdss_stm13, dac_calib7, cci_timer1,
 109                     qdss_stm12, dac_calib8, cci_timer2, blsp1_spi, qdss_stm11,
 110                     dac_calib9, cci_timer3, cci_async, dac_calib12, blsp_i2c6,
 111                     qdss_tracectl_a, dac_calib13, qdss_traceclk_a, dac_calib14,
 112                     dac_calib15, hdmi_rcv, dac_calib16, hdmi_cec, pwr_modem,
 113                     dac_calib17, hdmi_ddc, pwr_nav, dac_calib18, pwr_crypto,
 114                     dac_calib19, hdmi_hot, dac_calib20, dac_calib21, pci_e0,
 115                     dac_calib22, dac_calib23, dac_calib24, tsif1_sync, dac_calib25,
 116                     sd_write, tsif1_error, blsp_spi2, blsp_uart2, blsp_uim2,
 117                     qdss_cti, blsp_i2c2, blsp_spi3, blsp_uart3, blsp_uim3, blsp_i2c3,
 118                     uim3, blsp_spi9, blsp_uart9, blsp_uim9, blsp10_spi, blsp_i2c9,
 119                     blsp_spi7, blsp_uart7, blsp_uim7, qdss_tracedata_a, blsp_i2c7,
 120                     qua_mi2s, gcc_gp1_clk_a, ssc_irq, uim4, blsp_spi11, blsp_uart11,
 121                     blsp_uim11, gcc_gp2_clk_a, gcc_gp3_clk_a, blsp_i2c11, cri_trng0,
 122                     cri_trng1, cri_trng, qdss_stm18, pri_mi2s, qdss_stm17, blsp_spi4,
 123                     blsp_uart4, blsp_uim4, qdss_stm16, qdss_stm15, blsp_i2c4,
 124                     qdss_stm14, dac_calib26, spkr_i2s, audio_ref, lpass_slimbus,
 125                     isense_dbg, tsense_pwm1, tsense_pwm2, btfm_slimbus, ter_mi2s,
 126                     qdss_stm22, qdss_stm21, qdss_stm20, qdss_stm19, gcc_gp1_clk_b,
 127                     sec_mi2s, blsp_spi5, blsp_uart5, blsp_uim5, gcc_gp2_clk_b,
 128                     gcc_gp3_clk_b, blsp_i2c5, blsp_spi12, blsp_uart12, blsp_uim12,
 129                     qdss_stm25, qdss_stm31, blsp_i2c12, qdss_stm30, qdss_stm29,
 130                     tsif1_clk, qdss_stm28, tsif1_en, tsif1_data, sdc4_cmd, qdss_stm27,
 131                     qdss_traceclk_b, tsif2_error, sdc43, vfr_1, qdss_stm26, tsif2_clk,
 132                     sdc4_clk, qdss_stm24, tsif2_en, sdc42, qdss_stm23, qdss_tracectl_b,
 133                     sd_card, tsif2_data, sdc41, tsif2_sync, sdc40, mdp_vsync_p_b,
 134                     ldo_en, mdp_vsync_s_b, ldo_update, blsp11_uart_tx_b, blsp11_uart_rx_b,
 135                     blsp11_i2c_sda_b, prng_rosc, blsp11_i2c_scl_b, uim2, uim1, uim_batt,
 136                     pci_e2, pa_indicator, adsp_ext, ddr_bist, qdss_tracedata_11,
 137                     qdss_tracedata_12, modem_tsync, nav_dr, nav_pps, pci_e1, gsm_tx,
 138                     qspi_cs, ssbi2, ssbi1, mss_lte, qspi_clk, qspi0, qspi1, qspi2, qspi3,
 139                     gpio
 140
 141 - bias-disable:
 142         Usage: optional
 143         Value type: <none>
 144         Definition: The specified pins should be configued as no pull.
 145
 146 - bias-pull-down:
 147         Usage: optional
 148         Value type: <none>
 149         Definition: The specified pins should be configued as pull down.
 150
 151 - bias-pull-up:
 152         Usage: optional
 153         Value type: <none>
 154         Definition: The specified pins should be configued as pull up.
 155
 156 - output-high:
 157         Usage: optional
 158         Value type: <none>
 159         Definition: The specified pins are configured in output mode, driven
 160                     high.
 161                     Not valid for sdc pins.
 162
 163 - output-low:
 164         Usage: optional
 165         Value type: <none>
 166         Definition: The specified pins are configured in output mode, driven
 167                     low.
 168                     Not valid for sdc pins.
 169
 170 - drive-strength:
 171         Usage: optional
 172         Value type: <u32>
 173         Definition: Selects the drive strength for the specified pins, in mA.
 174                     Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16
 175
 176 Example:
 177
 178         tlmm: pinctrl@01010000 {
 179                 compatible = "qcom,msm8996-pinctrl";
 180                 reg = <0x01010000 0x300000>;
 181                 interrupts = <0 208 0>;
 182                 gpio-controller;
 183                 #gpio-cells = <2>;
 184                 interrupt-controller;
 185                 #interrupt-cells = <2>;
 186
 187                 uart_console_active: uart_console_active {
 188                         mux {
 189                                 pins = "gpio4", "gpio5";
 190                                 function = "blsp_uart8";
 191                         };
 192
 193                         config {
 194                                 pins = "gpio4", "gpio5";
 195                                 drive-strength = <2>;
 196                                 bias-disable;
 197                         };
 198                 };
 199         };