4 - compatible: should be one or more of
5 "brcm,bcm7425-sata-phy"
6 "brcm,bcm7445-sata-phy"
7 "brcm,iproc-ns2-sata-phy"
8 "brcm,iproc-nsp-sata-phy"
10 - address-cells: should be 1
11 - size-cells: should be 0
12 - reg: register ranges for the PHY PCB interface
13 - reg-names: should be "phy" and "phy-ctrl"
14 The "phy-ctrl" registers are only required for
15 "brcm,iproc-ns2-sata-phy".
18 Each port's PHY should be represented as a sub-node.
20 Sub-nodes required properties:
22 - phy-cells: generic PHY binding; must be 0
24 Sub-nodes optional properties:
25 - brcm,enable-ssc: use spread spectrum clocking (SSC) on this port
26 This property is not applicable for "brcm,iproc-ns2-sata-phy" and
27 "brcm,iproc-nsp-sata-phy".
31 compatible = "brcm,bcm7445-sata-phy", "brcm,phy-sata3";
32 reg = <0xf0458100 0x1e00>, <0xf045804c 0x10>;