Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt

   1 * Qualcomm Atheros ath10k wireless devices
   2
   3 Required properties:
   4 - compatible: Should be one of the following:
   5         * "qcom,ath10k"
   6         * "qcom,ipq4019-wifi"
   7         * "qcom,wcn3990-wifi"
   8
   9 PCI based devices uses compatible string "qcom,ath10k" and takes calibration
  10 data along with board specific data via "qcom,ath10k-calibration-data".
  11 Rest of the properties are not applicable for PCI based devices.
  12
  13 AHB based devices (i.e. ipq4019) uses compatible string "qcom,ipq4019-wifi"
  14 and also uses most of the properties defined in this doc (except
  15 "qcom,ath10k-calibration-data"). It uses "qcom,ath10k-pre-calibration-data"
  16 to carry pre calibration data.
  17
  18 In general, entry "qcom,ath10k-pre-calibration-data" and
  19 "qcom,ath10k-calibration-data" conflict with each other and only one
  20 can be provided per device.
  21
  22 SNOC based devices (i.e. wcn3990) uses compatible string "qcom,wcn3990-wifi".
  23
  24 - reg: Address and length of the register set for the device.
  25 - reg-names: Must include the list of following reg names,
  26              "membase"
  27 - interrupts: reference to the list of 17 interrupt numbers for "qcom,ipq4019-wifi"
  28               compatible target.
  29               reference to the list of 12 interrupt numbers for "qcom,wcn3990-wifi"
  30               compatible target.
  31               Must contain interrupt-names property per entry for
  32               "qcom,ath10k", "qcom,ipq4019-wifi" compatible targets.
  33
  34 - interrupt-names: Must include the entries for MSI interrupt
  35                    names ("msi0" to "msi15") and legacy interrupt
  36                    name ("legacy") for "qcom,ath10k", "qcom,ipq4019-wifi"
  37                    compatible targets.
  38
  39 Optional properties:
  40 - resets: Must contain an entry for each entry in reset-names.
  41           See ../reset/reseti.txt for details.
  42 - reset-names: Must include the list of following reset names,
  43                "wifi_cpu_init"
  44                "wifi_radio_srif"
  45                "wifi_radio_warm"
  46                "wifi_radio_cold"
  47                "wifi_core_warm"
  48                "wifi_core_cold"
  49 - clocks: List of clock specifiers, must contain an entry for each required
  50           entry in clock-names.
  51 - clock-names: Should contain the clock names "wifi_wcss_cmd", "wifi_wcss_ref",
  52                "wifi_wcss_rtc" for "qcom,ipq4019-wifi" compatible target and
  53                "cxo_ref_clk_pin" and optionally "qdss" for "qcom,wcn3990-wifi"
  54                compatible target.
  55 - qcom,msi_addr: MSI interrupt address.
  56 - qcom,msi_base: Base value to add before writing MSI data into
  57                 MSI address register.
  58 - qcom,ath10k-calibration-variant: string to search for in the /*(DEBLOBBED)*/
  59                                    variant list with the same bus and device
  60                                    specific ids
  61 - qcom,ath10k-calibration-data : calibration data + board specific data
  62                                  as an array, the length can vary between
  63                                  hw versions.
  64 - qcom,ath10k-pre-calibration-data : pre calibration data as an array,
  65                                      the length can vary between hw versions.
  66 - <supply-name>-supply: handle to the regulator device tree node
  67                            optional "supply-name" are "vdd-0.8-cx-mx",
  68                            "vdd-1.8-xo", "vdd-1.3-rfa", "vdd-3.3-ch0",
  69                            and "vdd-3.3-ch1".
  70 - memory-region:
  71         Usage: optional
  72         Value type: <phandle>
  73         Definition: reference to the reserved-memory for the msa region
  74                     used by the wifi firmware running in Q6.
  75 - iommus:
  76         Usage: optional
  77         Value type: <prop-encoded-array>
  78         Definition: A list of phandle and IOMMU specifier pairs.
  79 - ext-fem-name:
  80         Usage: Optional
  81         Value type: string
  82         Definition: Name of external front end module used. Some valid FEM names
  83                     for example: "microsemi-lx5586", "sky85703-11"
  84                     and "sky85803" etc.
  85 - qcom,snoc-host-cap-8bit-quirk:
  86         Usage: Optional
  87         Value type: <empty>
  88         Definition: Quirk specifying that the firmware expects the 8bit version
  89                     of the host capability QMI request
  90 - qcom,xo-cal-data: xo cal offset to be configured in xo trim register.
  91
  92 - qcom,msa-fixed-perm: Boolean context flag to disable SCM call for statically
  93                        mapped msa region.
  94
  95 - qcom,coexist-support : should contain eithr "0" or "1" to indicate coex
  96                          support by the hardware.
  97 - qcom,coexist-gpio-pin : gpio pin number  information to support coex
  98                           which will be used by wifi firmware.
  99
 100 * Subnodes
 101 The ath10k wifi node can contain one optional firmware subnode.
 102 Firmware subnode is needed when the platform does not have TustZone.
 103 The firmware subnode must have:
 104
 105 - iommus:
 106         Usage: required
 107         Value type: <prop-encoded-array>
 108         Definition: A list of phandle and IOMMU specifier pairs.
 109
 110
 111 Example (to supply PCI based wifi block details):
 112
 113 In this example, the node is defined as child node of the PCI controller.
 114
 115 pci {
 116         pcie@0 {
 117                 reg = <0 0 0 0 0>;
 118                 #interrupt-cells = <1>;
 119                 #size-cells = <2>;
 120                 #address-cells = <3>;
 121                 device_type = "pci";
 122
 123                 wifi@0,0 {
 124                         reg = <0 0 0 0 0>;
 125                         qcom,ath10k-calibration-data = [ 01 02 03 ... ];
 126                         ext-fem-name = "microsemi-lx5586";
 127                 };
 128         };
 129 };
 130
 131 Example (to supply ipq4019 SoC wifi block details):
 132
 133 wifi0: wifi@a000000 {
 134         compatible = "qcom,ipq4019-wifi";
 135         reg = <0xa000000 0x200000>;
 136         resets = <&gcc WIFI0_CPU_INIT_RESET>,
 137                  <&gcc WIFI0_RADIO_SRIF_RESET>,
 138                  <&gcc WIFI0_RADIO_WARM_RESET>,
 139                  <&gcc WIFI0_RADIO_COLD_RESET>,
 140                  <&gcc WIFI0_CORE_WARM_RESET>,
 141                  <&gcc WIFI0_CORE_COLD_RESET>;
 142         reset-names = "wifi_cpu_init",
 143                       "wifi_radio_srif",
 144                       "wifi_radio_warm",
 145                       "wifi_radio_cold",
 146                       "wifi_core_warm",
 147                       "wifi_core_cold";
 148         clocks = <&gcc GCC_WCSS2G_CLK>,
 149                  <&gcc GCC_WCSS2G_REF_CLK>,
 150                  <&gcc GCC_WCSS2G_RTC_CLK>;
 151         clock-names = "wifi_wcss_cmd",
 152                       "wifi_wcss_ref",
 153                       "wifi_wcss_rtc";
 154         interrupts = <0 0x20 0x1>,
 155                      <0 0x21 0x1>,
 156                      <0 0x22 0x1>,
 157                      <0 0x23 0x1>,
 158                      <0 0x24 0x1>,
 159                      <0 0x25 0x1>,
 160                      <0 0x26 0x1>,
 161                      <0 0x27 0x1>,
 162                      <0 0x28 0x1>,
 163                      <0 0x29 0x1>,
 164                      <0 0x2a 0x1>,
 165                      <0 0x2b 0x1>,
 166                      <0 0x2c 0x1>,
 167                      <0 0x2d 0x1>,
 168                      <0 0x2e 0x1>,
 169                      <0 0x2f 0x1>,
 170                      <0 0xa8 0x0>;
 171         interrupt-names = "msi0",  "msi1",  "msi2",  "msi3",
 172                           "msi4",  "msi5",  "msi6",  "msi7",
 173                           "msi8",  "msi9",  "msi10", "msi11",
 174                           "msi12", "msi13", "msi14", "msi15",
 175                           "legacy";
 176         qcom,msi_addr = <0x0b006040>;
 177         qcom,msi_base = <0x40>;
 178         qcom,ath10k-pre-calibration-data = [ 01 02 03 ... ];
 179         qcom,coexist-support = <1>;
 180         qcom,coexist-gpio-pin = <0x33>;
 181 };
 182
 183 Example (to supply wcn3990 SoC wifi block details):
 184
 185 wifi@18000000 {
 186                 compatible = "qcom,wcn3990-wifi";
 187                 reg = <0x18800000 0x800000>;
 188                 reg-names = "membase";
 189                 clocks = <&clock_gcc clk_rf_clk2_pin>;
 190                 clock-names = "cxo_ref_clk_pin";
 191                 interrupts =
 192                         <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
 193                         <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
 194                         <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
 195                         <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
 196                         <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
 197                         <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
 198                         <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
 199                         <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
 200                         <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
 201                         <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
 202                         <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
 203                         <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
 204                 vdd-0.8-cx-mx-supply = <&pm8998_l5>;
 205                 vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
 206                 vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
 207                 vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
 208                 vdd-3.3-ch1-supply = <&vreg_l26a_3p3>;
 209                 memory-region = <&wifi_msa_mem>;
 210                 iommus = <&apps_smmu 0x0040 0x1>;
 211                 qcom,msa-fixed-perm;
 212                 wifi-firmware {
 213                         iommus = <&apps_iommu 0xc22 0x1>;
 214                 };
 215 };