1 Marvell DSA Switch Device Tree Bindings
2 ---------------------------------------
4 WARNING: This binding is currently unstable. Do not program it into a
5 FLASH never to be changed again. Once this binding is stable, this
6 warning will be removed.
8 If you need a stable binding, use the old dsa.txt binding.
10 Marvell Switches are MDIO devices. The following properties should be
11 placed as a child node of an mdio device.
13 The properties described here are those specific to Marvell devices.
14 Additional required and optional properties can be found in dsa.txt.
17 - compatible : Should be one of "marvell,mv88e6085",
18 - reg : Address on the MII bus for the switch.
22 - reset-gpios : Should be a gpio specifier for a reset line
31 compatible = "marvell,mv88e6085";
33 reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;