GNU Linux-libre 6.1.90-gnu
[releases.git] / Documentation / devicetree / bindings / net / asix,ax88796c.yaml
1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
2 %YAML 1.2
3 ---
4 $id: http://devicetree.org/schemas/net/asix,ax88796c.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
6
7 title: ASIX AX88796C SPI Ethernet Adapter
8
9 maintainers:
10   - Ćukasz Stelmach <l.stelmach@samsung.com>
11
12 description: |
13   ASIX AX88796C is an Ethernet controller with a built in PHY. This
14   describes SPI mode of the chip.
15
16   The node for this driver must be a child node of an SPI controller,
17   hence all mandatory properties described in
18   ../spi/spi-controller.yaml must be specified.
19
20 allOf:
21   - $ref: ethernet-controller.yaml#
22
23 properties:
24   compatible:
25     const: asix,ax88796c
26
27   reg:
28     maxItems: 1
29
30   spi-max-frequency:
31     maximum: 40000000
32
33   interrupts:
34     maxItems: 1
35
36   reset-gpios:
37     description:
38       A GPIO line handling reset of the chip. As the line is active low,
39       it should be marked GPIO_ACTIVE_LOW.
40     maxItems: 1
41
42   local-mac-address: true
43
44   mac-address: true
45
46 required:
47   - compatible
48   - reg
49   - spi-max-frequency
50   - interrupts
51   - reset-gpios
52
53 additionalProperties: false
54
55 examples:
56   # Artik5 eval board
57   - |
58     #include <dt-bindings/interrupt-controller/irq.h>
59     #include <dt-bindings/gpio/gpio.h>
60     spi0 {
61         #address-cells = <1>;
62         #size-cells = <0>;
63
64         ethernet@0 {
65             compatible = "asix,ax88796c";
66             reg = <0x0>;
67             local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */
68             interrupt-parent = <&gpx2>;
69             interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
70             spi-max-frequency = <40000000>;
71             reset-gpios = <&gpe0 2 GPIO_ACTIVE_LOW>;
72         };
73     };