1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
4 $id: http://devicetree.org/schemas/media/i2c/sony,imx296.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Sony IMX296 1/2.8-Inch CMOS Image Sensor
10 - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
11 - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
14 The Sony IMX296 is a 1/2.9-Inch active pixel type CMOS Solid-state image
15 sensor with square pixel array and 1.58 M effective pixels. This chip
16 features a global shutter with variable charge-integration time. It is
17 programmable through I2C and 4-wire interfaces. The sensor output is
18 available via CSI-2 serial data output (1 Lane).
27 The IMX296 sensor exists in two different models, a colour variant
28 (IMX296LQ) and a monochrome variant (IMX296LL). The device exposes the
29 model through registers, allowing for auto-detection with a common
30 "sony,imx296" compatible string. However, some camera modules disable the
31 ability to read the sensor model register, which disables this feature.
32 In those cases, the exact model needs to be specified as "sony,imx296ll"
42 description: Input clock (37.125 MHz, 54 MHz or 74.25 MHz)
47 description: Analog power supply (3.3V)
50 description: Digital power supply (1.2V)
53 description: Interface power supply (1.8V)
56 description: Sensor reset (XCLR) GPIO
60 $ref: /schemas/graph.yaml#/properties/port
72 additionalProperties: false
76 #include <dt-bindings/gpio/gpio.h>
82 imx296: camera-sensor@1a {
83 compatible = "sony,imx296";
86 pinctrl-names = "default";
87 pinctrl-0 = <&camera_rear_default>;
92 avdd-supply = <&camera_vdda_3v3>;
93 dvdd-supply = <&camera_vddd_1v2>;
94 ovdd-supply = <&camera_vddo_1v8>;
96 reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>;
100 remote-endpoint = <&csiphy0_ep>;