1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
4 $id: http://devicetree.org/schemas/media/i2c/onnn,mt9m114.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: onsemi 1/6-inch 720p CMOS Digital Image Sensor
10 - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
13 The onsemi MT9M114 is a 1/6-inch 720p (1.26 Mp) CMOS digital image sensor
14 with an active pixel-array size of 1296H x 976V. It is programmable through
15 an I2C interface and outputs image data over a 8-bit parallel or 1-lane MIPI
23 description: I2C device address
29 description: EXTCLK clock signal
34 Core digital voltage supply, 1.8V
38 I/O digital voltage supply, 1.8V or 2.8V
42 Analog voltage supply, 2.8V
46 Reference to the GPIO connected to the RESET_BAR pin, if any (active
50 $ref: /schemas/graph.yaml#/$defs/port-base
51 additionalProperties: false
55 $ref: /schemas/media/video-interfaces.yaml#
56 additionalProperties: false
62 link-frequencies: true
65 # The number and mapping of lanes (for CSI-2), and the bus width and
66 # signal polarities (for parallel and BT.656) are fixed and must not
82 additionalProperties: false
86 #include <dt-bindings/gpio/gpio.h>
87 #include <dt-bindings/media/video-interfaces.h>
94 compatible = "onnn,mt9m114";
99 reset-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>;
101 vddio-supply = <®_cam_1v8>;
102 vdd-supply = <®_cam_1v8>;
103 vaa-supply = <®_2p8v>;
107 bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
108 link-frequencies = /bits/ 64 <384000000>;
109 remote-endpoint = <&mipi_csi_in>;