1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
4 $id: http://devicetree.org/schemas/gpio/renesas,rcar-gpio.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Renesas R-Car General-Purpose Input/Output Ports (GPIO)
10 - Geert Uytterhoeven <geert+renesas@glider.be>
17 - renesas,gpio-r8a7778 # R-Car M1
18 - renesas,gpio-r8a7779 # R-Car H1
19 - const: renesas,rcar-gen1-gpio # R-Car Gen1
23 - renesas,gpio-r8a7742 # RZ/G1H
24 - renesas,gpio-r8a7743 # RZ/G1M
25 - renesas,gpio-r8a7744 # RZ/G1N
26 - renesas,gpio-r8a7745 # RZ/G1E
27 - renesas,gpio-r8a77470 # RZ/G1C
28 - renesas,gpio-r8a7790 # R-Car H2
29 - renesas,gpio-r8a7791 # R-Car M2-W
30 - renesas,gpio-r8a7792 # R-Car V2H
31 - renesas,gpio-r8a7793 # R-Car M2-N
32 - renesas,gpio-r8a7794 # R-Car E2
33 - const: renesas,rcar-gen2-gpio # R-Car Gen2 or RZ/G1
37 - renesas,gpio-r8a774a1 # RZ/G2M
38 - renesas,gpio-r8a774b1 # RZ/G2N
39 - renesas,gpio-r8a774c0 # RZ/G2E
40 - renesas,gpio-r8a774e1 # RZ/G2H
41 - renesas,gpio-r8a7795 # R-Car H3
42 - renesas,gpio-r8a7796 # R-Car M3-W
43 - renesas,gpio-r8a77961 # R-Car M3-W+
44 - renesas,gpio-r8a77965 # R-Car M3-N
45 - renesas,gpio-r8a77970 # R-Car V3M
46 - renesas,gpio-r8a77980 # R-Car V3H
47 - renesas,gpio-r8a77990 # R-Car E3
48 - renesas,gpio-r8a77995 # R-Car D3
49 - const: renesas,rcar-gen3-gpio # R-Car Gen3 or RZ/G2
52 - const: renesas,gpio-r8a779a0 # R-Car V3U
74 interrupt-controller: true
103 additionalProperties: false
112 - interrupt-controller
121 - renesas,rcar-gen1-gpio
128 additionalProperties: false
132 #include <dt-bindings/clock/r8a77470-cpg-mssr.h>
133 #include <dt-bindings/interrupt-controller/arm-gic.h>
134 #include <dt-bindings/power/r8a77470-sysc.h>
135 gpio3: gpio@e6053000 {
136 compatible = "renesas,gpio-r8a77470", "renesas,rcar-gen2-gpio";
137 reg = <0xe6053000 0x50>;
138 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
139 clocks = <&cpg CPG_MOD 909>;
140 power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
144 gpio-ranges = <&pfc 0 96 30>;
145 gpio-reserved-ranges = <17 10>;
146 interrupt-controller;
147 #interrupt-cells = <2>;