1 * Atmel Extensible Direct Memory Access Controller (XDMAC)
5 - compatible: Should be "atmel,<chip>-dma".
6 <chip> compatible description:
7 - sama5d4: first SoC adding the XDMAC
8 - reg: Should contain DMA registers location and length.
9 - interrupts: Should contain DMA interrupt.
10 - #dma-cells: Must be <1>, used to represent the number of integer cells in
11 the dmas property of client devices.
12 - The 1st cell specifies the channel configuration register:
13 - bit 13: SIF, source interface identifier, used to get the memory
15 - bit 14: DIF, destination interface identifier, used to get the peripheral
17 - bit 30-24: PERID, peripheral identifier.
21 dma1: dma-controller@f0004000 {
22 compatible = "atmel,sama5d4-dma";
23 reg = <0xf0004000 0x200>;
24 interrupts = <50 4 0>;
30 DMA clients connected to the Atmel XDMA controller must use the format
31 described in the dma.txt file, using a one-cell specifier for each channel.
32 The two cells in order are:
33 1. A phandle pointing to the DMA controller.
34 2. Channel configuration register. Configurable fields are:
35 - bit 13: SIF, source interface identifier, used to get the memory
37 - bit 14: DIF, destination interface identifier, used to get the peripheral
39 - bit 30-24: PERID, peripheral identifier.
44 compatible = "atmel,at91sam9x5-i2c";
45 reg = <0xf8024000 0x4000>;
46 interrupts = <34 4 6>;
48 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
49 | AT91_XDMAC_DT_PERID(6))>,
51 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
52 | AT91_XDMAC_DT_PERID(7))>;
53 dma-names = "tx", "rx";