1 # SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
4 $id: http://devicetree.org/schemas/display/msm/dsi-phy-10nm.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Qualcomm Display DSI 10nm PHY
10 - Krishna Manikandan <quic_mkrishn@quicinc.com>
13 - $ref: dsi-phy-common.yaml#
19 - qcom,dsi-phy-10nm-8998
23 - description: dsi phy register set
24 - description: dsi phy lane register set
25 - description: dsi pll register set
35 Connected to DSI0_MIPI_DSI_PLL_VDDA0P9 pin for sc7180 target and
36 connected to VDDA_MIPI_DSI_0_PLL_0P9 pin for sdm845 target
38 qcom,phy-rescode-offset-top:
39 $ref: /schemas/types.yaml#/definitions/int8-array
43 Integer array of offset for pull-up legs rescode for all five lanes.
44 To offset the drive strength from the calibrated value in an increasing
45 manner, -32 is the weakest and +31 is the strongest.
50 qcom,phy-rescode-offset-bot:
51 $ref: /schemas/types.yaml#/definitions/int8-array
55 Integer array of offset for pull-down legs rescode for all five lanes.
56 To offset the drive strength from the calibrated value in a decreasing
57 manner, -32 is the weakest and +31 is the strongest.
62 qcom,phy-drive-ldo-level:
63 $ref: "/schemas/types.yaml#/definitions/uint32"
65 The PHY LDO has an amplitude tuning feature to adjust the LDO output
66 for the HSTX drive. Use supported levels (mV) to offset the drive level
67 from the default value.
68 enum: [ 375, 400, 425, 450, 475, 500 ]
76 unevaluatedProperties: false
80 #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
81 #include <dt-bindings/clock/qcom,rpmh.h>
84 compatible = "qcom,dsi-phy-10nm";
85 reg = <0x0ae94400 0x200>,
88 reg-names = "dsi_phy",
95 vdds-supply = <&vdda_mipi_dsi0_pll>;
96 clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
97 <&rpmhcc RPMH_CXO_CLK>;
98 clock-names = "iface", "ref";
100 qcom,phy-rescode-offset-top = /bits/ 8 <0 0 0 0 0>;
101 qcom,phy-rescode-offset-bot = /bits/ 8 <0 0 0 0 0>;
102 qcom,phy-drive-ldo-level = <400>;