GNU Linux-libre 6.1.90-gnu
[releases.git] / Documentation / admin-guide / mm / ksm.rst
1 .. _admin_guide_ksm:
2
3 =======================
4 Kernel Samepage Merging
5 =======================
6
7 Overview
8 ========
9
10 KSM is a memory-saving de-duplication feature, enabled by CONFIG_KSM=y,
11 added to the Linux kernel in 2.6.32.  See ``mm/ksm.c`` for its implementation,
12 and http://lwn.net/Articles/306704/ and https://lwn.net/Articles/330589/
13
14 KSM was originally developed for use with KVM (where it was known as
15 Kernel Shared Memory), to fit more virtual machines into physical memory,
16 by sharing the data common between them.  But it can be useful to any
17 application which generates many instances of the same data.
18
19 The KSM daemon ksmd periodically scans those areas of user memory
20 which have been registered with it, looking for pages of identical
21 content which can be replaced by a single write-protected page (which
22 is automatically copied if a process later wants to update its
23 content). The amount of pages that KSM daemon scans in a single pass
24 and the time between the passes are configured using :ref:`sysfs
25 intraface <ksm_sysfs>`
26
27 KSM only merges anonymous (private) pages, never pagecache (file) pages.
28 KSM's merged pages were originally locked into kernel memory, but can now
29 be swapped out just like other user pages (but sharing is broken when they
30 are swapped back in: ksmd must rediscover their identity and merge again).
31
32 Controlling KSM with madvise
33 ============================
34
35 KSM only operates on those areas of address space which an application
36 has advised to be likely candidates for merging, by using the madvise(2)
37 system call::
38
39         int madvise(addr, length, MADV_MERGEABLE)
40
41 The app may call
42
43 ::
44
45         int madvise(addr, length, MADV_UNMERGEABLE)
46
47 to cancel that advice and restore unshared pages: whereupon KSM
48 unmerges whatever it merged in that range.  Note: this unmerging call
49 may suddenly require more memory than is available - possibly failing
50 with EAGAIN, but more probably arousing the Out-Of-Memory killer.
51
52 If KSM is not configured into the running kernel, madvise MADV_MERGEABLE
53 and MADV_UNMERGEABLE simply fail with EINVAL.  If the running kernel was
54 built with CONFIG_KSM=y, those calls will normally succeed: even if the
55 KSM daemon is not currently running, MADV_MERGEABLE still registers
56 the range for whenever the KSM daemon is started; even if the range
57 cannot contain any pages which KSM could actually merge; even if
58 MADV_UNMERGEABLE is applied to a range which was never MADV_MERGEABLE.
59
60 If a region of memory must be split into at least one new MADV_MERGEABLE
61 or MADV_UNMERGEABLE region, the madvise may return ENOMEM if the process
62 will exceed ``vm.max_map_count`` (see Documentation/admin-guide/sysctl/vm.rst).
63
64 Like other madvise calls, they are intended for use on mapped areas of
65 the user address space: they will report ENOMEM if the specified range
66 includes unmapped gaps (though working on the intervening mapped areas),
67 and might fail with EAGAIN if not enough memory for internal structures.
68
69 Applications should be considerate in their use of MADV_MERGEABLE,
70 restricting its use to areas likely to benefit.  KSM's scans may use a lot
71 of processing power: some installations will disable KSM for that reason.
72
73 .. _ksm_sysfs:
74
75 KSM daemon sysfs interface
76 ==========================
77
78 The KSM daemon is controlled by sysfs files in ``/sys/kernel/mm/ksm/``,
79 readable by all but writable only by root:
80
81 pages_to_scan
82         how many pages to scan before ksmd goes to sleep
83         e.g. ``echo 100 > /sys/kernel/mm/ksm/pages_to_scan``.
84
85         Default: 100 (chosen for demonstration purposes)
86
87 sleep_millisecs
88         how many milliseconds ksmd should sleep before next scan
89         e.g. ``echo 20 > /sys/kernel/mm/ksm/sleep_millisecs``
90
91         Default: 20 (chosen for demonstration purposes)
92
93 merge_across_nodes
94         specifies if pages from different NUMA nodes can be merged.
95         When set to 0, ksm merges only pages which physically reside
96         in the memory area of same NUMA node. That brings lower
97         latency to access of shared pages. Systems with more nodes, at
98         significant NUMA distances, are likely to benefit from the
99         lower latency of setting 0. Smaller systems, which need to
100         minimize memory usage, are likely to benefit from the greater
101         sharing of setting 1 (default). You may wish to compare how
102         your system performs under each setting, before deciding on
103         which to use. ``merge_across_nodes`` setting can be changed only
104         when there are no ksm shared pages in the system: set run 2 to
105         unmerge pages first, then to 1 after changing
106         ``merge_across_nodes``, to remerge according to the new setting.
107
108         Default: 1 (merging across nodes as in earlier releases)
109
110 run
111         * set to 0 to stop ksmd from running but keep merged pages,
112         * set to 1 to run ksmd e.g. ``echo 1 > /sys/kernel/mm/ksm/run``,
113         * set to 2 to stop ksmd and unmerge all pages currently merged, but
114           leave mergeable areas registered for next run.
115
116         Default: 0 (must be changed to 1 to activate KSM, except if
117         CONFIG_SYSFS is disabled)
118
119 use_zero_pages
120         specifies whether empty pages (i.e. allocated pages that only
121         contain zeroes) should be treated specially.  When set to 1,
122         empty pages are merged with the kernel zero page(s) instead of
123         with each other as it would happen normally. This can improve
124         the performance on architectures with coloured zero pages,
125         depending on the workload. Care should be taken when enabling
126         this setting, as it can potentially degrade the performance of
127         KSM for some workloads, for example if the checksums of pages
128         candidate for merging match the checksum of an empty
129         page. This setting can be changed at any time, it is only
130         effective for pages merged after the change.
131
132         Default: 0 (normal KSM behaviour as in earlier releases)
133
134 max_page_sharing
135         Maximum sharing allowed for each KSM page. This enforces a
136         deduplication limit to avoid high latency for virtual memory
137         operations that involve traversal of the virtual mappings that
138         share the KSM page. The minimum value is 2 as a newly created
139         KSM page will have at least two sharers. The higher this value
140         the faster KSM will merge the memory and the higher the
141         deduplication factor will be, but the slower the worst case
142         virtual mappings traversal could be for any given KSM
143         page. Slowing down this traversal means there will be higher
144         latency for certain virtual memory operations happening during
145         swapping, compaction, NUMA balancing and page migration, in
146         turn decreasing responsiveness for the caller of those virtual
147         memory operations. The scheduler latency of other tasks not
148         involved with the VM operations doing the virtual mappings
149         traversal is not affected by this parameter as these
150         traversals are always schedule friendly themselves.
151
152 stable_node_chains_prune_millisecs
153         specifies how frequently KSM checks the metadata of the pages
154         that hit the deduplication limit for stale information.
155         Smaller milllisecs values will free up the KSM metadata with
156         lower latency, but they will make ksmd use more CPU during the
157         scan. It's a noop if not a single KSM page hit the
158         ``max_page_sharing`` yet.
159
160 The effectiveness of KSM and MADV_MERGEABLE is shown in ``/sys/kernel/mm/ksm/``:
161
162 pages_shared
163         how many shared pages are being used
164 pages_sharing
165         how many more sites are sharing them i.e. how much saved
166 pages_unshared
167         how many pages unique but repeatedly checked for merging
168 pages_volatile
169         how many pages changing too fast to be placed in a tree
170 full_scans
171         how many times all mergeable areas have been scanned
172 stable_node_chains
173         the number of KSM pages that hit the ``max_page_sharing`` limit
174 stable_node_dups
175         number of duplicated KSM pages
176
177 A high ratio of ``pages_sharing`` to ``pages_shared`` indicates good
178 sharing, but a high ratio of ``pages_unshared`` to ``pages_sharing``
179 indicates wasted effort.  ``pages_volatile`` embraces several
180 different kinds of activity, but a high proportion there would also
181 indicate poor use of madvise MADV_MERGEABLE.
182
183 The maximum possible ``pages_sharing/pages_shared`` ratio is limited by the
184 ``max_page_sharing`` tunable. To increase the ratio ``max_page_sharing`` must
185 be increased accordingly.
186
187 Monitoring KSM profit
188 =====================
189
190 KSM can save memory by merging identical pages, but also can consume
191 additional memory, because it needs to generate a number of rmap_items to
192 save each scanned page's brief rmap information. Some of these pages may
193 be merged, but some may not be abled to be merged after being checked
194 several times, which are unprofitable memory consumed.
195
196 1) How to determine whether KSM save memory or consume memory in system-wide
197    range? Here is a simple approximate calculation for reference::
198
199         general_profit =~ pages_sharing * sizeof(page) - (all_rmap_items) *
200                           sizeof(rmap_item);
201
202    where all_rmap_items can be easily obtained by summing ``pages_sharing``,
203    ``pages_shared``, ``pages_unshared`` and ``pages_volatile``.
204
205 2) The KSM profit inner a single process can be similarly obtained by the
206    following approximate calculation::
207
208         process_profit =~ ksm_merging_pages * sizeof(page) -
209                           ksm_rmap_items * sizeof(rmap_item).
210
211    where ksm_merging_pages is shown under the directory ``/proc/<pid>/``,
212    and ksm_rmap_items is shown in ``/proc/<pid>/ksm_stat``.
213
214 From the perspective of application, a high ratio of ``ksm_rmap_items`` to
215 ``ksm_merging_pages`` means a bad madvise-applied policy, so developers or
216 administrators have to rethink how to change madvise policy. Giving an example
217 for reference, a page's size is usually 4K, and the rmap_item's size is
218 separately 32B on 32-bit CPU architecture and 64B on 64-bit CPU architecture.
219 so if the ``ksm_rmap_items/ksm_merging_pages`` ratio exceeds 64 on 64-bit CPU
220 or exceeds 128 on 32-bit CPU, then the app's madvise policy should be dropped,
221 because the ksm profit is approximately zero or negative.
222
223 Monitoring KSM events
224 =====================
225
226 There are some counters in /proc/vmstat that may be used to monitor KSM events.
227 KSM might help save memory, it's a tradeoff by may suffering delay on KSM COW
228 or on swapping in copy. Those events could help users evaluate whether or how
229 to use KSM. For example, if cow_ksm increases too fast, user may decrease the
230 range of madvise(, , MADV_MERGEABLE).
231
232 cow_ksm
233         is incremented every time a KSM page triggers copy on write (COW)
234         when users try to write to a KSM page, we have to make a copy.
235
236 ksm_swpin_copy
237         is incremented every time a KSM page is copied when swapping in
238         note that KSM page might be copied when swapping in because do_swap_page()
239         cannot do all the locking needed to reconstitute a cross-anon_vma KSM page.
240
241 --
242 Izik Eidus,
243 Hugh Dickins, 17 Nov 2009