X-Git-Url: https://jxself.org/git/?p=open-ath9k-htc-firmware.git;a=blobdiff_plain;f=target_firmware%2Fmagpie_fw_dev%2Ftarget%2Fhif%2Fk2_fw_usb_api.c;h=4aceaef06573d83820816cec221f0672cea5c709;hp=7d4c4fff0576f0083b557ad2c085e3af1ed773eb;hb=a595388aceac29334b75c1fd83b074991897cc54;hpb=be52f254f3ed7af6f09ff6cdcd32da9edbfaba33

diff --git a/target_firmware/magpie_fw_dev/target/hif/k2_fw_usb_api.c b/target_firmware/magpie_fw_dev/target/hif/k2_fw_usb_api.c
index 7d4c4ff..4aceaef 100755
--- a/target_firmware/magpie_fw_dev/target/hif/k2_fw_usb_api.c
+++ b/target_firmware/magpie_fw_dev/target/hif/k2_fw_usb_api.c
@@ -402,120 +402,6 @@ void _fw_usb_reset_fifo(void)
     A_UART_HWINIT((22*1000*1000), 19200);
 }
 
-void cold_reboot(void)
-{
-	A_PRINTF("Cold reboot initiated.");
-#if defined(PROJECT_MAGPIE)
-	HAL_WORD_REG_WRITE(WATCH_DOG_MAGIC_PATTERN_ADDR, 0);
-#elif defined(PROJECT_K2)
-	HAL_WORD_REG_WRITE(MAGPIE_REG_RST_STATUS_ADDR, 0);
-#endif /* #if defined(PROJECT_MAGPIE) */
-	A_USB_JUMP_BOOT();
-}
-
-/*
- * -- support more than 64 bytes command on ep4 -- 
- */
-void vUsb_Reg_Out_patch(void)
-{   
-    uint16_t usbfifolen;
-    uint16_t ii;
-    uint32_t ep4_data;
-    static volatile uint32_t *regaddr;    // = (volatile uint32_t *) ZM_CMD_BUFFER;
-    static uint16_t cmdLen;
-    static VBUF *buf;
-    BOOLEAN cmd_is_last = FALSE;
-    static BOOLEAN cmd_is_new = TRUE;
-
-    // get the size of this transcation
-    usbfifolen = USB_BYTE_REG_READ(ZM_EP4_BYTE_COUNT_LOW_OFFSET);
-    if (usbfifolen > 0x40) {
-        A_PRINTF("EP4 FIFO Bug? Buffer is too big: %x\n", usbfifolen);
-        cold_reboot();
-    }
-
-    // check is command is new
-    if( cmd_is_new ){
-
-        buf = usbFifoConf.get_command_buf();
-        cmdLen = 0;
-    
-        if( !buf )
-            goto ERR;
-    
-        // copy free, assignment buffer of the address
-        regaddr = (uint32_t *)buf->desc_list->buf_addr;
-
-        cmd_is_new = FALSE;
-    }
-    
-    // just in case, suppose should not happen
-    if( !buf )
-        goto ERR;
-    
-    // if size is smaller, this is the last command!
-    //
-    // zero-length supposed should be set through 0x27/bit7->0x19/bit4, not here
-    //
-    if( usbfifolen<bUSB_EP_MAX_PKT_SIZE_64 ) {
-        cmd_is_last = TRUE;
-    }
-    
-    // accumulate the size
-    cmdLen += usbfifolen;
-    if (cmdLen > buf->desc_list->buf_size) {
-        A_PRINTF("Data length on EP4 FIFO is bigger as allocated buffer data!"
-                 " Drop it!\n");
-        goto ERR;
-    }
-    
-    // round it to alignment
-    if(usbfifolen % 4)
-        usbfifolen = (usbfifolen >> 2) + 1;
-    else
-        usbfifolen = usbfifolen >> 2;
-    
-//    A_PRINTF("copy data out from fifo to - %p\n\r", regaddr);
-    // retrieve the data from fifo
-    for(ii = 0; ii < usbfifolen; ii++)
-    {
-        ep4_data = USB_WORD_REG_READ(ZM_EP4_DATA_OFFSET);   // read fifo data out
-        *regaddr = ep4_data;
-        regaddr++;
-    }
-    
-    // if this is the last command, callback to HTC
-    if (  cmd_is_last  )
-    {
-        buf->desc_list->next_desc = NULL;
-        buf->desc_list->data_offset = 0;
-        buf->desc_list->data_size = cmdLen;
-        buf->desc_list->control = 0;
-        buf->next_buf = NULL;
-        buf->buf_length = cmdLen;
-    
-        usbFifoConf.recv_command(buf);
-
-        cmd_is_new = TRUE;
-    }
-
-    goto DONE;
-ERR:
-//    we might get no command buffer here?
-//    but if we return here, the ep4 fifo will be lock out,
-//    so that we still read them out but just drop it ?
-    for(ii = 0; ii < usbfifolen; ii++)
-    {
-        ep4_data = USB_WORD_REG_READ(ZM_EP4_DATA_OFFSET);   // read fifo data out
-    }
-
-DONE:
-    //mUSB_STATUS_IN_INT_ENABLE();
-    ;
-}
-
-
-
 /* 
  *  -- usb1.1 ep6 fix --
  */