X-Git-Url: https://jxself.org/git/?p=linux-libre-firmware.git;a=blobdiff_plain;f=INSTALL;h=7fb111653d0885c3086970712c53adb08527bbfd;hp=dfabf2aa0887b97610652d58455a3706a84596ce;hb=dd4bc9ff49b9a7075e579fdd62fd930d27a9a7df;hpb=e1dbb655f1ea6131a5fbab41af2a0117642fa87c

diff --git a/INSTALL b/INSTALL
index dfabf2a..7fb1116 100644
--- a/INSTALL
+++ b/INSTALL
@@ -2,7 +2,7 @@ Briefly, running "make" without specifying any targets will build
 everything. You may not necessarily want everything though and can
 also specify targets to make. For example:
 
-        make av7110
+    make av7110
 
 Please see the included Makefile for a list of all available targets.
 
@@ -10,29 +10,55 @@ Once the desired things are built, "make install" will put them into
 the appropriate place, which is /lib/firmware by default although you
 can override this with something like:
 
-        make prefix=/desired/path install
+    make prefix=/desired/path install
 
-In order to build everything you will need the following on the host 
+In order to build everything you will need the following on the host
 system:
-	* A C compiler, like GCC
-	* Cmake
-	* GNU Bison/YACC
-	* GNU Flex
-	* GNU Gperf
-	* GNU Make
-	* GNU Wget
-        * GNU C cross-compiler for ARM:
-                - arm-linux-gnueabi-gcc
-                - arm-linux-gnueabi-ld
-                - arm-linux-gnueabi-objcopy
+
+    * A C/C++ compiler, like GCC
+    * AVR-GCC
+    * Standard C library for AVR-GCC
+    * Cmake
+    * GNU Bison/YACC
+    * GNU Flex
+    * GNU Gperf
+    * GNU Make
+    * GNU Wget
+    * GNU C cross-compiler for ARM:
+        - arm-linux-gnueabi-gcc
+        - arm-linux-gnueabi-ld
+        - arm-linux-gnueabi-objcopy
+        - arm-none-eabi-gcc
+        - arm-none-eabi-objcopy
+        - arm-none-eabi-as
+
+On GNU/Linux distros that use apt you can install these with:
+
+    apt install avr-gcc avr-libc binutils-arm-linux-gnueabi \
+    binutils-arm-none-eabi bison cmake flex g++ gcc \
+    gcc-arm-linux-gnueabi gcc-arm-none-eabi gperf make wget
 
 CARL9170 Firmware Configuration
+-------------------------------
 When building the carl9170 firmware you will be prompted with
 configuration questions.
 
------
-Copyright (C) 2017 Jason Self <j@jxself.org>
-Copying and distribution of this file, with or without modification,
-are permitted in any medium without royalty provided the copyright
-notice and this notice are preserved.  This file is offered as-is,
-without any warranty.
+atusb: Firmware for the ATUSB IEEE 802.15.4 USB Adapter
+-------------------------------------------------------
+
+To flash the firmware you need dfu-util on the host. Issue
+
+    make dfu
+
+right after plugging the device into the USB port while the red led is
+still on.
+
+Refer to the included README file for more information.
+
+Licensing
+---------
+
+You can redistribute and/or modify this file under the terms of the
+GNU General Public License as published by the Free Software
+Foundation, either version 3 of the License, or (at your option) any
+later version.
\ No newline at end of file