+++ /dev/null
-/*
- * Copyright (c) 2013 Qualcomm Atheros, Inc.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted (subject to the limitations in the
- * disclaimer below) provided that the following conditions are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- *
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the
- * distribution.
- *
- * * Neither the name of Qualcomm Atheros nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE
- * GRANTED BY THIS LICENSE. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT
- * HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-/*************************************************************************/
-/* Copyright (c) 2006 Atheros Communications, Inc., All Rights Reserved */
-/* */
-/* Module Name : mem_addrs.h */
-/* */
-/* Abstract */
-/* This file contains definition of the memory related information. */
-/* */
-/* NOTES */
-/* None */
-/* */
-/*************************************************************************/
-
-#ifndef _MEM_ADDRS_H_
-#define _MEM_ADDRS_H_
-
-#define SYS_ROM_BLOCK_SIZE (32*1024)
-#if MAGPIE_FPGA_RAM_256K == 1
-#define SYS_ROM_BLOCK_NUM 2 //ram 256K version is also rom 64k version
-#else
-#define SYS_ROM_BLOCK_NUM 3
-#endif
-#define SYS_ROM_SIZE (SYS_ROM_BLOCK_SIZE*SYS_ROM_BLOCK_NUM)
-
-#if MAGPIE_FPGA_RAM_256K == 1
-#define SYS_RAM_BLOCK_SIZE 64*1024
-#else
-#define SYS_RAM_BLOCK_SIZE 40*1024
-#endif
-
-#define SYS_RAM_BLOCK_NUM 4
-#define SYS_RAM_SZIE (SYS_RAM_BLOCK_SIZE*SYS_RAM_BLOCK_NUM)
-
-/* instruction port area */
-#define SYS_I_R0M_REGION_0_BASE 0x8e0000
-
-#define SYS_I_RAM_REGION_0_BASE 0x900000
-#define SYS_I_RAM_REGION_1_BASE (SYS_I_RAM_REGION_0_BASE+SYS_RAM_BLOCK_SIZE)
-#define SYS_I_RAM_REGION_2_BASE (SYS_I_RAM_REGION_1_BASE+SYS_RAM_BLOCK_SIZE)
-#define SYS_I_RAM_REGION_3_BASE (SYS_I_RAM_REGION_2_BASE+SYS_RAM_BLOCK_SIZE)
-
-/* data port area */
-#define SYS_D_R0M_REGION_0_BASE 0x4e0000
-
-#define SYS_D_RAM_REGION_0_BASE 0x500000
-#define SYS_D_RAM_REGION_1_BASE (SYS_D_RAM_REGION_0_BASE+SYS_RAM_BLOCK_SIZE)
-#define SYS_D_RAM_REGION_2_BASE (SYS_D_RAM_REGION_1_BASE+SYS_RAM_BLOCK_SIZE)
-#define SYS_D_RAM_REGION_3_BASE (SYS_D_RAM_REGION_2_BASE+SYS_RAM_BLOCK_SIZE)
-
-/* data and bss section */
-
-#define SYS_D_RAM_DATA_BSS SYS_D_RAM_REGION_0_BASE
-#define SYS_D_RAM_DATA_BSS_SZ SYS_RAM_BLOCK_SIZE
-#define SYS_D_RAM_STACK_SIZE (2*1024)
-
-/////////////////////////////////////////////////////////////////////////////////////
-#define EEPROM_CTRL_BASE 0x10ff0000
-#define EEPROM_ADDR_BASE (EEPROM_CTRL_BASE+0x2000)
-
-#define EEPROM_SIZE 0xfff // 4K addressing space, each has 2 bytes, (a half word)
-#define EEPROM_START_OFFSET 0 // THIS SHOULD NOT MODIFY
-#define EEPROM_END_OFFSET (EEPROM_START_OFFSET+EEPROM_SIZE) // end of the eeprom offset
-
-/////////////////////////////////////////////////////////////////////////////////////
-#define EEPROM_USB_DESCRIPTOR_ADDR ((uint32_t)&_bss_end) // address at RAM to put descriptor data
-#define USB_DESC_START_ADDR 0x780
-#define USB_DESCRIPTOR_ADDR USB_DESC_START_ADDR // eeprom offset to sotre the descriptor data
-
-#define USB_DESC_IN_EEPROM_SIZE 2 // indicate eeprom is exist in eeprom
-#define USB_DEVICE_DESCRIPTOR_SIZE 16 // Device Descriptor
-#define USB_STRING00_DESCRIPTOR_SIZE 6 // 16 half word
-#define USB_STRING10_DESCRIPTOR_SIZE 12 // Manufacture data
-#define USB_STRING20_DESCRIPTOR_SIZE 16 // Product/Company data
-#define USB_STRING30_DESCRIPTOR_SIZE 8 // Serial Number
-
-#define USB_DEVICE_PID_SIZE 1 // PID SIZE, 1 halfword offset
-#define USB_DEVICE_VID_SIZE 1 // VID SIZE, 1 halfword offset
-
-#define USB_DESC_IN_EEPROM_FLAG_OFFSET USB_DESCRIPTOR_ADDR
-#define USB_DEVICE_DESCRIPTOR_OFFSET (USB_DESC_IN_EEPROM_FLAG_OFFSET+USB_DESC_IN_EEPROM_SIZE)
-#define USB_STRING00_DESCRIPTOR_OFFSET (USB_DEVICE_DESCRIPTOR_OFFSET+USB_DEVICE_DESCRIPTOR_SIZE)
-#define USB_STRING10_DESCRIPTOR_OFFSET (USB_STRING00_DESCRIPTOR_OFFSET+USB_STRING00_DESCRIPTOR_SIZE)
-#define USB_STRING20_DESCRIPTOR_OFFSET (USB_STRING10_DESCRIPTOR_OFFSET+USB_STRING10_DESCRIPTOR_SIZE)
-#define USB_STRING30_DESCRIPTOR_OFFSET (USB_STRING20_DESCRIPTOR_OFFSET+USB_STRING20_DESCRIPTOR_SIZE)
-
-#define USB_DEVICE_VID_OFFSET (USB_DEVICE_DESCRIPTOR_OFFSET+4)
-#define USB_DEVICE_PID_OFFSET (USB_DEVICE_VID_OFFSET+USB_DEVICE_VID_SIZE)
-
-#define USB_DESC_IN_EEPROM_FLAG_ADDR EEPROM_USB_DESCRIPTOR_ADDR
-#define USB_DEVICE_DESCRIPTOR_ADDR (USB_DESC_IN_EEPROM_FLAG_ADDR+(USB_DESC_IN_EEPROM_SIZE*2))
-#define USB_STRING00_DESCRIPTOR_ADDR (USB_DEVICE_DESCRIPTOR_ADDR+(USB_DEVICE_DESCRIPTOR_SIZE*2))
-#define USB_STRING10_DESCRIPTOR_ADDR (USB_STRING00_DESCRIPTOR_ADDR+(USB_STRING00_DESCRIPTOR_SIZE*2))
-#define USB_STRING20_DESCRIPTOR_ADDR (USB_STRING10_DESCRIPTOR_ADDR+(USB_STRING10_DESCRIPTOR_SIZE*2))
-#define USB_STRING30_DESCRIPTOR_ADDR (USB_STRING20_DESCRIPTOR_ADDR+(USB_STRING20_DESCRIPTOR_SIZE*2))
-
-#define USB_DEVICE_VID_ADDR (USB_DEVICE_DESCRIPTOR_ADDR+4)
-#define USB_DEVICE_PID_ADDR (USB_DEVICE_VID_ADDR+USB_DEVICE_VID_SIZE)
-
-#define USB_DESC_IN_EEP_PATTERN 0x41544852 //ATHR
-
-/****************************** patch in eeprom *****************************************/
-#define ROM_PATCH_EEPROM_SIZE 2 // 4 bytes
-
-#define ROM_PATCH_EEPROM_OFFSET 0xfc
-#define ROM_PATCH_BUF_ADDR SYS_D_RAM_REGION_3_BASE
-
-#endif /* _MEM_ADDRS_H_ */
projects / linux-libre-firmware.git / blobdiff