carl9170 firmware: return to the default clock rate before rebooting

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: update version to 1.9.2

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: replace a few FUSB200 magics

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: refactor suspend/resume callbacks

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: add some more Faraday's FUSB200 defs

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: remove static rx chainmask register update

The driver takes care of both chainmasks values.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: clarify aggregation vs. qos situation

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

ieee80211: add Parameter Set Count bitmask

WMM IE QoS Info field lower 4 bits: Parameter Set Count

Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: toolchain binutils 2.21

Finally, it's out.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

cfg80211: add some element IDs in enum ieee80211_eid

1)WLAN_EID_BSS_COEX_2040
2)WLAN_EID_OVERLAP_BSS_SCAN_PARAM
3)WLAN_EID_EXT_CAPABILITY

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: reset PTA-DMA registers before reboot

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: add defs of the default interrupt table

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: reinit stack pointer before jumping to bootcode

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: cleanup dma memory before reset

While the documentation does not mention anything
in this regard. There's clearly some bootloader
action in the DMA memory region.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: update version to 1.9.1

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: fix random reboot failures

This patch improves the reliability of various
reboot paths.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware build: automatically apply miniboot.fw

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: minor shared header clean up

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: fix ar9170_stream struct

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carlu: move from private carl9170_tx_status to public _carl9170_tx_status

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: privatize firmware structs

This patch removes all public bit-packed structs
from the public view by making them private with
ifdef __CARL9170FW__.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

Revert "carl9170 firmware: toolchain binutils 2.20.51"

This reverts commit 1999e162e83656d48ede992f37923c6efa85b123.

Oops, 2.20.51 is not an official release.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: fix build error

carlfw/usb/usb.c: In function 'usb_ep0setup':
carlfw/usb/usb.c:701: error: will never be executed

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

mac80211: Update mesh constants to approved IEEE ANA values

This patch updates IEEE802.11 mesh constants to be consistent with newly
approved values. It modifies some values, as well as adds many new constants
in preparation for updating mesh code to the current 802.11s drafts. ANA
numbers were taken from:
https://mentor.ieee.org/802.11/dcn/09/11-09-0031-12-0000-ana-database-assigned-number-authority.xls

A few notes are in order:
1. This will break backwards compatibility with existing Linux kernels as
over-the-air constants have changed.
2. Some old and obsolete constants have been retained for now as the mesh code
itself hasn't been updated yet to the new 802.11s draft. This was desired to
keep the existing mesh scheme working until it can be updated. Adding the
approved values is the first step in updating the mesh code.
3. Obsolete constants have been clearly marked.
4. All ANA approved 802.11s constants have been added.

Signed-off-by: Steve deRosier <steve@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: introduce __aligned compiler attribute v2

This patch reduces the firmware image size considerably.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carlu: carlu_regwrite wrappers

The wrappers will come in handy, once we
need to import code from the kernel driver.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carlu: merge usb-frontend context carlusb into generic carlu struct

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carlu: add missing endian conversion

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carlu: add GPIO test

This new test allows flashes the LEDs and allows
the user to check if the WPS button works.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carlu: put command definitions into separate header

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carlu: support testing async commands

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carlu: fix copy+paste error

Don't download and check the firmware image twice.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: update pram size comment

Only 16 kbytes are reserved for the program ram (+ stack), or
at least visible for my customer device.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: update API to 1.9.0

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: reintegrate timer/clock routines

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170: fix total error filter bit handling

The total error (aka fatal error) bit was erroneously
prefixed as AR9170_RX_ERROR instead of AR9170_RX_STATUS.

(+ minor styling tweaks)

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firwmare: toolchain gcc 4.4.5

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware tools: don't show null entries

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: remove bogoclock

There's no need to measure the cpu clock. The internal clock
source is (always) set to 80Mhz and only timer 0 to 3 are
affected by under-/overclocking.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: purge undefined function declarations

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: introduce __noreturn attribute

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: upgrade API struct layout checks

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: update API to 1.8.8.3

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: implement software rx filter

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: toolchain binutils 2.20.51

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: remove firmware context memset

There's no need to reinitialize the firmware context on boot.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: abort build if stack frame > 128

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: update default config

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: update API to 1.8.8.2

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: outsource obsolete TX DMA bump code

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: update shared headers

 * add SET_CONSTVAL helper

 * cosmetic changes

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: improve mac reset handling

Extensive testing has confirmed that the code from the original
firmware source might not be sufficient to restore the MAC-state
after a reset.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: remove trailing semicolon from #define

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: harmonize shared header layout

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: purge duplicated registers

Felix kindly pointed out:
* SYNTH_CONTROL was introduced in the AR9002+ generation.

* TXPWRADJ is of little relevance for AR9001.

* M_SLEEP same as above, only of use on pre-11n chips.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: update API to 1.8.8.1

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware tools: fix crash if source is a directory

The tools will no longer crash if the "firmware" file is
a directory.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: move SRAM & PRAM definitions into shared headers

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: modify the right beacon

Previously, the beacon address and length hardware registers
were (ab-)used as additional parameters for the beacon
modification functions. This idea worked fine, until I decided
to change the associated code and moved the beacon address and
length "set" _after_ the wlan_cab_modify_dtim_beacon...

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: update API to 1.8.8

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: remove stale hw definitios

Looks like MAC vs. CAM name lead to some confusion.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: rename cab_flush to bcn_ctrl and fix update delay

Along with the renaming, this patch fixes the weird
beacon update delay and removes the previously used
workaround for the problem.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: add undocumented PRETBTT timer

There seems to be an additional timer in the MAC_PRETBTT
register. Unfortunately, the hardware specification does
not have any documentation about what this timer, (or
how it differs from the other for that matter).

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: update copyright boilerplate

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: update API to 1.8.7.1

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: revamp Content After Beacon handling

Commit "carl9170 firmware: Support multiple CAB queues"
introduced a regression. The CAB queue was drained too
early and therefore the bc/mc buffered frames were sent
out at the wrong dtim period.

This patch takes care of the stated regression, but it
also fixes yet another, this time a more theoretical
race in multi AP mode.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: update API to 1.8.7

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: update default config

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: mac reset refactoring, take-2

No matter what, the current MAC-only reset code is not
adequate, if the MAC state machine gets completely stuck.

This patch introduces a configurable switch, which
allows the firmware to delegate a full-chip reset
to the driver.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: add definition for async PSM command

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: check virtual interface no. range

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: update API to 1.8.6

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: remove unused dummys

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: Support multiple CAB queues

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: boot-up interrupt

The firmware now generates an interrupt after it booted.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: set AHB clock to 40MHz early on

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: compact pta_init

A small gain can be obtained by caching the temporary
usb control flag modifications and commit the new
setting at the end.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: update API to 1.8.5

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: remove usb transport watchdog

The idea of this watchdog was to check regulary,
whenever the driver was still responding to firmware
requests within a reasonable window. But the concept
is flawed and never received any substantial testing.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: revamp reset code

Getting the reset code to work 100% proved to be
a wild-goose chase. Therefore we'll settle with
an easier solution and let the usb subsystem take
care of the clean-up operation.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: add comment about RX overrun recovery

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: Initialize USB subsystem before the DMA engine

The documentation states that the USB DMA engine control register
(0x1e1108) should be modified when the state engine is idling.
By tuning the initialization order and placing a larger workload
in between, the state machine should now always be in the correct
state.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: downgrade MAC reset error level

Currently, MAC resets are the major cause of sudden death
situations. By downgrading the message to just an
"information" the reset logic in the driver no longer
assumes that a serious, fatal event occured and won't
shutdown prematurely.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: put power management definitions into the correct place

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: fix error code handling

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: update API to 1.8.0

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: integrate firmware descriptors

Merge the USB firmware descriptor into OTAR.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: save a few bytes on the command handler

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: add flag for asynchronous commands

This flag can be used by the application to tell _same_
application that it does not have to wait for the command
response, or it does not need to parse the received
response if the flag is set.

NOTE: The firmware does not care about this flag and
processes any received command in the same way.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: implement command sequence counter

The sequence is useful to detect the loss of a command
response/trap.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: update API to 1.7.3

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: speedup handle_rx

Thanks to the improved rx processing in the driver,
rx overruns should no longer happen that frequently.

Also, The overrun detection might not be triggered
in this code-path at all when the recv wlan queue
has run dry.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: move wlan_dma_bump

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: fix array-out-of-bounds bug

This patch fixes an out-of-bounds access which would occur
if the driver sets queue to 6 or 7. Additionally, the
transmission status report has only reserved 2 bits for
reporting this information.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: allow fallback to non-aggregation xmit

This feature might come handy in future. Because aggregation
does not always work as smoothly as hoped. Furthermore,
the original firmware did something similar.

But be advised that once the aggregation for any particular
frame retry was disabled. It should remain disabled for all
following tries and not be enabled again.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: drop noise reading from channel switch response

The driver manually queries the noise values anyway.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: update API to 1.7.2

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: use sudo to install firmware

Only a root-user can modify the files under /lib/firmware.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: streamline dma_put hot-path

This patch restores the original code-path in dma_put.
It no longer tries to correct the control flags for
all dma transfers.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: rename ^CARL*_MASK$ to ^CARL*$

This synchronizes the usage of _MASK in HW defintions
with ath9k and other Atheros' drivers.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>